LJ-X8002 Keyence

Specifications

Model		LJ-X8002
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^1 [3D mode] When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) ^1 When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) ^2 (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) ^3
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		[2D mode]Maximum 200 per setting per head (depends on SD card capacity) [3D mode]Maximum 400 per setting (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		[2D mode]100/setting (of those, 20 are for misalignment correction) [3D mode]Maximum of 100/setting
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*4
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		[2D mode]0.1 µm 0.000004", 0.01°, 0.00001 mm² [3D mode]0.1 µm 0.000004", 0.001°, 0.0001 mm2, 0.00001 mm³
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 When the measurement range is narrowed in accordance with the binning settings. ^2 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values. ^3 When binning and parallel imaging are both ON. All other settings are default values. ^4 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Est. delivery between and

73,913.00 kr

1-year warranty

FREE WORDWIDE SHIPPING

Condition:

Sealed Surplus

SKU: LJ-X8002-Sealed

Sold out

0.00 kr

Never Used Surplus

SKU: LJ-X8002

1 verified stock

73,913.00 kr

Used

SKU: LJ-X8002-Used

Sold out

0.00 kr

Variant

Quantity:

Need More?

Specifications

Model		LJ-X8002
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^1 [3D mode] When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) ^1 When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) ^2 (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) ^3
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		[2D mode]Maximum 200 per setting per head (depends on SD card capacity) [3D mode]Maximum 400 per setting (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		[2D mode]100/setting (of those, 20 are for misalignment correction) [3D mode]Maximum of 100/setting
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*4
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		[2D mode]0.1 µm 0.000004", 0.01°, 0.00001 mm² [3D mode]0.1 µm 0.000004", 0.001°, 0.0001 mm2, 0.00001 mm³
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 When the measurement range is narrowed in accordance with the binning settings. ^2 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values. ^3 When binning and parallel imaging are both ON. All other settings are default values. ^4 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

Model		LJ-X8002
Head input		Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model.
Sampling cycle (trigger interval)		[2D mode] Maximum speed of 1 kHz (1 ms) ^1 [3D mode] When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) ^1 When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) ^2 (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) ^3
Number of registered inspection settings		Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible
Master profile / number of reference images		[2D mode]Maximum 200 per setting per head (depends on SD card capacity) [3D mode]Maximum 400 per setting (depends on SD card capacity)
Memory card		• SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E
Number of tools		[2D mode]100/setting (of those, 20 are for misalignment correction) [3D mode]Maximum of 100/setting
Interface	Control input	20 points (input terminal block: 5 points, parallel I/O: 15 points)
	Control output	28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET^*4
	RS-232C	• Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps
	PLC link	• Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication)
	Ethernet	• Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E)
	USB	• Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0
	EtherNet/IP™	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test
	PROFINET	• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA)
	EtherCAT^®	• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test
	Mouse	Various menus can be controlled via the dedicated mouse (included with the controller)
	SNTP	Automatic correction of date and time for this unit is possible by connecting to an SNTP server
	USB HDD	By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output
	Monitor output	Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz)
Encoder input		1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V)
Response frequency	RS-422	Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz
	Open collector (OC)	Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz
Laser ON input		Non-voltage input (Shorted with short pin when shipped from factory)
Cooling fan		Provided
Minimum display unit		[2D mode]0.1 µm 0.000004", 0.01°, 0.00001 mm² [3D mode]0.1 µm 0.000004", 0.001°, 0.0001 mm2, 0.00001 mm³
Language		Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish
Ratings	Power voltage	24 V DC ±10%
	Maximum current consumption	3.3 A
Environmental resistance	Ambient temperature	0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting)
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 2500 g
^1 When the measurement range is narrowed in accordance with the binning settings. ^2 When the measurement range is set to minimum, binning is ON, and parallel imaging is ON. All other settings are default values. ^3 When binning and parallel imaging are both ON. All other settings are default values. ^4 Positive common connection is supported for NPN input devices, and negative common connection for PNP input devices.

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Need More?

Contact Us

You can call, email, or chat us
we're here to support your business.

(847) 242-1595

Chat

support@plc-direct.com

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator