1 year warranty
The GE Fanuc IC693CPU363 is a single-slot central processing unit module designed for the Series 90-30 programmable logic controller family. Built around the 80386EX microprocessor running at 25 MHz, it delivers a typical scan rate of 0.22 ms per 1K of Boolean logic. The module provides 240 KB of user programmable memory and supports up to 2048 discrete inputs and 2048 discrete outputs. It features three built-in serial ports supporting SNP, SNPX master/slave, and Modbus RTU slave protocols, with one port accessible through the power supply connector and two onboard ports via RJ-45 and DB-15 connectors. The IC693CPU363 can connect to up to seven remote or expansion baseplates and supports optional Ethernet and Profibus communication modules. It includes features such as periodic subroutine functionality, floating point math support from firmware release 9.0, and Flash memory for CPU firmware storage.
Item Details
- Brand Name: GE Fanuc
- Manufacturer: GE Fanuc (now Emerson)
- Item Type Name: PLC CPU Module
- Product Family / Series: Series 90-30
Product Specifications
- processor_type: 80386EX
- processor_speed: 25 MHz
- user_memory: 240 KB
- scan_rate: 0.22 ms per 1K Boolean logic
- discrete_inputs: 2048 points
- discrete_outputs: 2048 points
- discrete_global_memory: 1280 bits
- internal_coils: 4096 bits
- output_temporary_coils: 256 bits
- system_status_references: 128 bits
- register_memory: 128 to 32640 words (configurable in 128 word increments)
- system_registers: 28 words
- serial_ports: 3
- supported_protocols: SNP, SNPX master/slave, Modbus RTU slave
- power_supply_voltage: 5 VDC
- power_supply_current: 890 mA
- operating_temperature: 0 to 60 °C
- maximum_baseplates: 8 (1 CPU baseplate + 7 expansion/remote)
Additional Details
- Certifications / Approvals: CE, cUL
- Communication Support: Optional Profibus and Ethernet modules, FIP, GBC, GCM, GCM+ modules
- Battery Backup: Yes (for real-time clock)
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator