E82CV402K2C Lenze

Description

Lenze's E82CV402K2C is classified as a frequency inverter, primarily functioning as a base controller in various applications. It employs vector control technology to facilitate efficient operation. With a mains voltage of 230V and structured for three-phase connections, this inverter can provide an output power of 4.0 kW, equating to approximately 5.0 horsepower.

The unit's design incorporates cold plate technology, which is dependent on the specific type utilized. With a total weight of 2.4 kg, this electronic product installs conveniently into different systems. Its thermal management is enhanced by maintaining a thermal resistor rating at or below 0.13 K/W, contributing to operational efficiency.

This inverter delivers a direct current output of 0.8 kW, aiding in versatile applications. During operation, the rated mains current reaches 21.3A for three-phase connectivity, which decreases to 16A when a mains choke is integrated. The design accounts for power dissipation, indicating an internal loss of 63W, with an additional loss of 127W to the cooler. Together, these features outline the inverter's capacity and suitability for demanding industrial tasks.

Technical specifications for E82CV402K2C

Manufacturer Lenze
Series Series 8200
Part Number E82CV402K2C
Description of module Frequency inverter (base controller)
Thermal resistor Less than or equal to 0.13 K/W
Weight 2.4 kg
Electronic product Yes
Design type “Cold plate” technology (type-dependent)
Version Vector controlled inverter
Output Power 4.0 kW or 5.0 HP
Mains voltage 230V
Voltage phases 3 phase
Output DC power 0.8 kW
Rated mains current (3 phase) 21.3A without mains choke and 16A with mains choke
Dissipated power loss 63W (inside) and 127W (cooler)
Price on request
Ask for quote
   

Notify Me When Available

Description

Lenze's E82CV402K2C is classified as a frequency inverter, primarily functioning as a base controller in various applications. It employs vector control technology to facilitate efficient operation. With a mains voltage of 230V and structured for three-phase connections, this inverter can provide an output power of 4.0 kW, equating to approximately 5.0 horsepower.

The unit's design incorporates cold plate technology, which is dependent on the specific type utilized. With a total weight of 2.4 kg, this electronic product installs conveniently into different systems. Its thermal management is enhanced by maintaining a thermal resistor rating at or below 0.13 K/W, contributing to operational efficiency.

This inverter delivers a direct current output of 0.8 kW, aiding in versatile applications. During operation, the rated mains current reaches 21.3A for three-phase connectivity, which decreases to 16A when a mains choke is integrated. The design accounts for power dissipation, indicating an internal loss of 63W, with an additional loss of 127W to the cooler. Together, these features outline the inverter's capacity and suitability for demanding industrial tasks.

Technical specifications for E82CV402K2C

Manufacturer Lenze
Series Series 8200
Part Number E82CV402K2C
Description of module Frequency inverter (base controller)
Thermal resistor Less than or equal to 0.13 K/W
Weight 2.4 kg
Electronic product Yes
Design type “Cold plate” technology (type-dependent)
Version Vector controlled inverter
Output Power 4.0 kW or 5.0 HP
Mains voltage 230V
Voltage phases 3 phase
Output DC power 0.8 kW
Rated mains current (3 phase) 21.3A without mains choke and 16A with mains choke
Dissipated power loss 63W (inside) and 127W (cooler)
Manufacturer Lenze
Series Series 8200
Part Number E82CV402K2C
Description of module Frequency inverter (base controller)
Thermal resistor Less than or equal to 0.13 K/W
Weight 2.4 kg
Electronic product Yes
Design type “Cold plate” technology (type-dependent)
Version Vector controlled inverter
Output Power 4.0 kW or 5.0 HP
Mains voltage 230V
Voltage phases 3 phase
Output DC power 0.8 kW
Rated mains current (3 phase) 21.3A without mains choke and 16A with mains choke
Dissipated power loss 63W (inside) and 127W (cooler)

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Trusted By

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator