BMH1002P06F2A Schneider

BMH1002P06F2A Schneider

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 6000RPM, smooth shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 5.04A and a continuous power of 2.36W. The shaft dimensions are 19mm (Diameter) x 40mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 202.3mm (Length) x 100mm (Width), centring collar dimensions are 3.5mm (Depth) x 95mm (Diameter) with 115mm circle diameter of the mounting hole. It weighs 6.4kg. This product is compatible with Lexium 32 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

Main

Characteristic Value(s)
Device short name BMH
Product or Component Type Servo motor
Maximum mechanical speed 6000 rpm
Continuous stall torque 54.9 lbf.in (6.2 N.m) LXM32.D18N4 6 A, 400 V, three phase
54.9 lbf.in (6.2 N.m) LXM32.D18N4 6 A, 480 V, three phase
Peak stall torque 162.9 lbf.in (18.4 N.m) LXM32.D18N4 6 A, 400 V, three phase
162.9 lbf.in (18.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal output power 1600 W LXM32.D18N4 6 A, 400 V, three phase
1600 W LXM32.D18N4 6 A, 480 V, three phase
Nominal torque 34.5 lbf.in (3.9 N.m) LXM32.D18N4 6 A, 400 V, three phase
34.5 lbf.in (3.9 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal speed 4000 rpm LXM32.D18N4 6 A, 400 V, three phase
4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Product compatibility LXM32.D18N4 400...480 V three phase
Shaft end Smooth shaft
IP Degree of Protection IP54 standard
Speed feedback resolution 32768 points/turn
Holding brake With
Mounting Support International standard flange
Electrical Connection Rotatable right-angled connectors

Complementary

Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 5.04 A
Continuous power 2.36 W
Maximum current Irms 17.5 A LXM32.D18N4
Maximum permanent current 18.23 A
Second shaft Without second shaft end
Shaft diameter 0.7 in (19 mm)
Shaft length 1.6 in (40 mm)
Feedback type Single turn SinCos Hiperface
Holding torque 48.7 lbf.in (5.5 N.m) holding brake
Motor flange size 3.9 in (100 mm)
Number of motor stacks 2
Torque constant 1.19 N.m/A 248 °F (120 °C)
Back emf constant 77 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 6.77 kg.cm²
Stator resistance 1.51 Ohm 68 °F (20 °C)
Stator inductance 4.12 mH 68 °F (20 °C)
Stator electrical time constant 5 ms 68 °F (20 °C)
Maximum radial force Fr 990 N 1000 rpm
790 N 2000 rpm
690 N 3000 rpm
620 N 4000 rpm
580 N 5000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 12 W
type of cooling Natural convection
Length 8.0 in (202.3 mm)
Centring collar diameter 3.7 in (95 mm)
centring collar depth 0.1 in (3.5 mm)
Number of mounting holes 4
Mounting holes diameter 0.4 in (9 mm)
Circle diameter of the mounting holes 4.5 in (115 mm)
Product Weight 14.1 lb(US) (6.4 kg)
Sizing reference BMH1002P
Network number of phases 3
Accuracy error [angular] 4.8 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)
Est. delivery between and    
Estimated delivery dates are estimates only. Int'l customers allow a few more days. For more precise delivery estimates, please contact us at support@plc-direct.com. Contact us in advance for expedited shipping options.
23,821.00 kr
1-year warranty
FREE WORDWIDE SHIPPING
Condition:
0.00 kr
23,821.00 kr
0.00 kr
Need More?
Ach Direct Debit American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 6000RPM, smooth shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 5.04A and a continuous power of 2.36W. The shaft dimensions are 19mm (Diameter) x 40mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 202.3mm (Length) x 100mm (Width), centring collar dimensions are 3.5mm (Depth) x 95mm (Diameter) with 115mm circle diameter of the mounting hole. It weighs 6.4kg. This product is compatible with Lexium 32 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.

Main

Characteristic Value(s)
Device short name BMH
Product or Component Type Servo motor
Maximum mechanical speed 6000 rpm
Continuous stall torque 54.9 lbf.in (6.2 N.m) LXM32.D18N4 6 A, 400 V, three phase
54.9 lbf.in (6.2 N.m) LXM32.D18N4 6 A, 480 V, three phase
Peak stall torque 162.9 lbf.in (18.4 N.m) LXM32.D18N4 6 A, 400 V, three phase
162.9 lbf.in (18.4 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal output power 1600 W LXM32.D18N4 6 A, 400 V, three phase
1600 W LXM32.D18N4 6 A, 480 V, three phase
Nominal torque 34.5 lbf.in (3.9 N.m) LXM32.D18N4 6 A, 400 V, three phase
34.5 lbf.in (3.9 N.m) LXM32.D18N4 6 A, 480 V, three phase
Nominal speed 4000 rpm LXM32.D18N4 6 A, 400 V, three phase
4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Product compatibility LXM32.D18N4 400...480 V three phase
Shaft end Smooth shaft
IP Degree of Protection IP54 standard
Speed feedback resolution 32768 points/turn
Holding brake With
Mounting Support International standard flange
Electrical Connection Rotatable right-angled connectors

Complementary

Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 5.04 A
Continuous power 2.36 W
Maximum current Irms 17.5 A LXM32.D18N4
Maximum permanent current 18.23 A
Second shaft Without second shaft end
Shaft diameter 0.7 in (19 mm)
Shaft length 1.6 in (40 mm)
Feedback type Single turn SinCos Hiperface
Holding torque 48.7 lbf.in (5.5 N.m) holding brake
Motor flange size 3.9 in (100 mm)
Number of motor stacks 2
Torque constant 1.19 N.m/A 248 °F (120 °C)
Back emf constant 77 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 6.77 kg.cm²
Stator resistance 1.51 Ohm 68 °F (20 °C)
Stator inductance 4.12 mH 68 °F (20 °C)
Stator electrical time constant 5 ms 68 °F (20 °C)
Maximum radial force Fr 990 N 1000 rpm
790 N 2000 rpm
690 N 3000 rpm
620 N 4000 rpm
580 N 5000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 12 W
type of cooling Natural convection
Length 8.0 in (202.3 mm)
Centring collar diameter 3.7 in (95 mm)
centring collar depth 0.1 in (3.5 mm)
Number of mounting holes 4
Mounting holes diameter 0.4 in (9 mm)
Circle diameter of the mounting holes 4.5 in (115 mm)
Product Weight 14.1 lb(US) (6.4 kg)
Sizing reference BMH1002P
Network number of phases 3
Accuracy error [angular] 4.8 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)
Characteristic Value(s)
Range Compatibility Lexium 32
[Us] rated supply voltage 480 V
Phase Three phase
Continuous stall current 5.04 A
Continuous power 2.36 W
Maximum current Irms 17.5 A LXM32.D18N4
Maximum permanent current 18.23 A
Second shaft Without second shaft end
Shaft diameter 0.7 in (19 mm)
Shaft length 1.6 in (40 mm)
Feedback type Single turn SinCos Hiperface
Holding torque 48.7 lbf.in (5.5 N.m) holding brake
Motor flange size 3.9 in (100 mm)
Number of motor stacks 2
Torque constant 1.19 N.m/A 248 °F (120 °C)
Back emf constant 77 V/krpm 248 °F (120 °C)
Number of motor poles 5.0
Rotor inertia 6.77 kg.cm²
Stator resistance 1.51 Ohm 68 °F (20 °C)
Stator inductance 4.12 mH 68 °F (20 °C)
Stator electrical time constant 5 ms 68 °F (20 °C)
Maximum radial force Fr 990 N 1000 rpm
790 N 2000 rpm
690 N 3000 rpm
620 N 4000 rpm
580 N 5000 rpm
Maximum axial force Fa 0.2 x Fr
Brake pull-in power 12 W
type of cooling Natural convection
Length 8.0 in (202.3 mm)
Centring collar diameter 3.7 in (95 mm)
centring collar depth 0.1 in (3.5 mm)
Number of mounting holes 4
Mounting holes diameter 0.4 in (9 mm)
Circle diameter of the mounting holes 4.5 in (115 mm)
Product Weight 14.1 lb(US) (6.4 kg)
Sizing reference BMH1002P
Network number of phases 3
Accuracy error [angular] 4.8 °
Temperature copper hot 275 °F (135 °C)
Temperature magnet hot 212 °F (100 °C)
Temperature magnet rt 68 °F (20 °C)

All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.

If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.

In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.

PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.

Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.

PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.

Trusted By

"Fast service for obsolete parts"

Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!

Buyer at GE Health

"Helping us move projects forward"

With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.

Buyer at E-Merge Systems – A Rockwell Integrator