1 year warranty
Ask for quote
| Characteristic | Value(s) |
|---|---|
| Maximum mechanical speed | 3000 rpm |
| [Us] rated supply voltage | 220 V |
| Phase | Single phase Three phase |
| Continuous stall current | 6.18 A |
| Continuous stall torque | 63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, single phase 63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, three phase 63.37 lbf.in (7.16 N.m) LXM28 7 A, 220 V, single phase 63.37 lbf.in (7.16 N.m) LXM28 7 A, 220 V, three phase |
| Continuous power | 1500 W |
| Peak stall torque | 190.11 lbf.in (21.48 N.m) LXM26D 7 A, 220 V, single phase 190.11 lbf.in (21.48 N.m) LXM26D 7 A, 220 V, three phase 190.11 lbf.in (21.48 N.m) LXM28... 7 A, 220 V, single phase 190.11 lbf.in (21.48 N.m) LXM28... 7 A, 220 V, three phase |
| Nominal output power | 1500 W LXM26D 7 A, 220 V, single phase 1500 W LXM26D 7 A, 220 V, three phase 1500 W LXM28... 7 A, 220 V, single phase 1500 W LXM28... 7 A, 220 V, three phase |
| Nominal torque | 63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, single phase 63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, three phase 63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, single phase 63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, three phase |
| Nominal speed | 2000 rpm LXM26D 7 A, 220 V, single phase 2000 rpm LXM26D 7 A, 220 V, three phase 2000 rpm LXM28... 7 A, 220 V, single phase 2000 rpm LXM28... 7 A, 220 V, three phase |
| Maximum current Irms | 20.31 A LXM28... 1.5 kW, 220 V |
| Maximum permanent current | 6.74 A |
| Product compatibility | LXM26D servo drive 1.5 kW, 220 V, single phase LXM26D servo drive 1.5 kW, 220 V, three phase LXM28... servo drive 1.5 kW, 220 V, single phase LXM28... servo drive 1.5 kW, 220 V, three phase |
| Shaft end | Keyed |
| Shaft diameter | 0.9 in (22 mm) |
| Shaft length | 2.2 in (55 mm) |
| key width | 0.3 in (8 mm) |
| Feedback type | 20 bits single turn absolute encoder |
| Holding brake | With |
| Holding torque | 85.0 lbf.in (9.6 N.m) built-in |
| Mounting Support | Asian standard flange |
| Motor flange size | 5.1 in (130 mm) |
| Electrical connection | Connector MIL |
| Torque constant | 1.16 N.m/A 68 °F (20 °C) |
| Back emf constant | 70 V/krpm 68 °F (20 °C) |
| Number of motor poles | 5.0 |
| Rotor inertia | 10 kg.cm² |
| Stator resistance | 0.64 Ohm 68 °F (20 °C) |
| Stator inductance | 6.4 mH 68 °F (20 °C) |
| Stator electrical time constant | 10 ms 68 °F (20 °C) |
| Maximum radial force Fr | 670 N 2000 rpm |
| Maximum axial force Fa | 200 N |
| Brake pull-in power | 19.7 W |
| type of cooling | Natural convection |
| Length | 8.0 in (202 mm) |
| Number of motor stacks | 3 |
| Centring collar diameter | 4.3 in (110 mm) |
| centring collar depth | 0.3 in (8 mm) |
| Number of mounting holes | 4 |
| Mounting holes diameter | 0.4 in (9.2 mm) |
| Circle diameter of the mounting holes | 5.7 in (145 mm) |
| Distance shaft shoulder-flange | 0.3 in (8 mm) |
| Product Weight | 19.4 lb(US) (8.8 kg) |
| Sizing reference | BCH2 |
| Network number of phases | 1 |
| Accuracy error [angular] | 0.044 ° |
| Temperature copper hot | 275 °F (135 °C) |
| Temperature magnet hot | 212 °F (100 °C) |
| Temperature magnet rt | 68 °F (20 °C) |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Ask for quote
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator