1 year warranty
The Siemens SIPART PS2 (6DR5010-0NG01-0AA0) is a smart electropneumatic positioner designed for precise control of pneumatic linear and part-turn actuators in process automation applications. This 2-wire, loop-powered device receives a 4-20 mA analog input signal and uses compressed air as auxiliary power to modulate valve position. It features automatic commissioning with self-adjustment of zero and span, a friction clutch with selectable gearbox for compatibility with various actuator types, and a fail-safe function that depressurizes the actuator in case of electrical power failure. The device offers extensive diagnostics, tight shut-off capability, and negligible air consumption during steady-state operation. Housed in a polycarbonate enclosure without explosion protection, it is suitable for general industrial environments in oil and gas, chemical processing, water treatment, and power generation applications.
Item Details
- Brand Name: Siemens
- Manufacturer: Siemens AG
- Item Type Name: Electropneumatic Valve Positioner
- Product Family / Series: SIPART PS2
- Model Number: 6DR5010-0NG01-0AA0
- Actuator Type: Single-acting
- Communication Protocol: 4-20 mA analog signal
Product Specifications
- input_signal: 4-20 mA
- wiring: 2-wire loop-powered
- supply_pressure_range: 1.4-7 bar
- operating_temperature: -30°C to +80°C
- ingress_protection: IP66 / NEMA 4X
- electrical_connection_thread: M20x1.5
- pneumatic_connection_thread: G 1/4
- air_quality_requirement: ISO 8573-1 Class 3
- maximum_air_consumption: <0.036 Nm³/h
- linear_actuator_stroke_range: 3-130 mm
- rotary_actuator_angle_range: 30-100 degrees
- position_detection: Non-contacting wear-free
Additional Details
- Country of Origin*: France
- Explosion Protection: Without explosion protection
- Enclosure Material: Polycarbonate
- Limit Monitor: Without limit monitor
- Option Module: Analog Output Module (AOM) optionally available
- Fail Safe Function: Depressurizes actuator on electrical power failure (single-acting only)
- Mounting Standard: NAMUR (IEC 534-6) and VDI/VDE 3845
*Country of origin may vary.
Measurements
- Weight: 0.9 kg
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator