1 year warranty
The Phoenix Contact MACX MCR-EX-SL-RPSSI-I is an intrinsically safe repeater power supply and input signal conditioner designed for hazardous area applications. This device transmits supplied or active 0/4-20 mA signals from the Ex (explosive) area to a load in the safe area, supporting both active and passive loads. It features HART transparency for digital communication overlay, three-way galvanic isolation for enhanced safety, and SIL 2 compliance according to IEC 61508 for functional safety applications. The compact 12.5 mm wide housing is suitable for DIN rail mounting, making it ideal for space-constrained control panels. The module utilizes screw connection terminals with integrated sockets for HART communicators, providing reliable signal transmission and isolation between intrinsically safe circuits and control systems in process automation and industrial monitoring applications.
Item Details
- Brand Name: Phoenix Contact
- Manufacturer: Phoenix Contact GmbH & Co. KG
- Item Type Name: Ex i Repeater Power Supply and Signal Conditioner
- Product Family / Series: MACX Analog Ex (MACX MCR-EX)
- Model: MACX MCR-EX-SL-RPSSI-I
- Part Number: 2865340
- Alternative Part Number: 28 65 34 0
- Upc: 4046356160353
Product Specifications
- input_signal: 0/4-20 mA (intrinsically safe)
- output_signal: 0/4-20 mA
- supply_voltage_range: 19.2-30 V DC
- nominal_supply_voltage: 24 V DC
- signal_channels: 1-channel
- operating_temperature_range: -20°C to +60°C
- insulation_voltage: 375 V
- test_voltage: 2.5 kV
- step_response: <600 μs (for jump 4 mA to 20 mA)
- underload_overload_range: 0 mA to 22.5 mA (typical 23 mA, according to NE 43)
- permissible_humidity: 10% to 95% (no condensation)
- electrical_isolation: 3-way galvanic isolation
- safety_integrity_level: SIL 2 according to IEC 61508
- communication_protocol: HART-transparent
- connection_type: Screw-clamp connections
Additional Details
- Country of Origin*: Germany
- Lifecycle Status: Commercialized
- Certifications / Approvals: ATEX, IECEx, UL Listed, cULus, EAC (Russia), CCC (China), INMETRO (Brazil)
- Mounting Type: DIN rail (NS 35, EN 60715)
- Operating Mode: Repeater power supply operation or Isolating amplifier operation
- Atex Directive: ATEX 94/9/EC (Category 3G modules)
- Zone Classification: Suitable for Zone 2 (Ex area)
*Country of origin may vary.
Measurements
- Width: 12.5 mm
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator