1 year warranty
The ABB PSTX470-600-70 is a three-phase soft starter designed for motor control applications with a rated maximum operational current of 470 A and an operating voltage range of 208 to 600 V AC. This advanced soft starter provides controlled motor starting and stopping through voltage or torque ramp functions, featuring a built-in bypass for energy efficiency. The unit incorporates comprehensive motor protection functions including current limit, kickstart, motor heating protection, and pump cleaning capabilities. Standard features include jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode. The PSTX470-600-70 is equipped with a detachable full graphic display rated IP66 with 4x outdoor rating. Communication is supported through built-in Modbus RTU and optional ANYBUS modules for major industrial protocols including Profinet, Profibus, Modbus TCP, and Ethernet/IP. The soft starter is suitable for demanding industrial applications including pumps, fans, compressors, and conveyors requiring smooth motor acceleration and deceleration.
Item Details
- Brand Name: ABB
- Manufacturer: ABB
- Item Type Name: Soft Starter
- Product Family / Series: PSTX Series
- Model Number: PSTX470-600-70
- Catalog Number: 1SFA898116R7000
Product Specifications
- rated_operational_current: 470 A
- operational_voltage_range: 208-600 V AC
- control_supply_voltage: 100-250 V AC
- frequency: 50/60 Hz
- phase: 3-phase
- motor_power_at_400V: 250 kW
- motor_power_at_500V: 315 kW
- horsepower_at_480V: 400 HP
- main_terminals_protection: IP00
- display_protection: IP66 / NEMA 4X
- operating_temperature_range: -25 to +60 °C
- storage_temperature_range: -40 to +70 °C
- control_method: Three-phase controlled soft start/stop
- starting_modes: Voltage ramp, Torque ramp
- built_in_bypass: Yes
- mounting: Keyhole mounting
- main_circuit_connection: Bars, 8.5 mm hole diameter
- control_circuit_connection: Screw terminals, 1 x 2.5 mm²
- tightening_torque: 35 N·m
Additional Details
- Communication Protocols: Modbus RTU (built-in), Modbus TCP, Ethernet/IP, Profinet, Profibus, DeviceNet, CANopen, EtherCAT, BACnet IP, BACnet MSTP (via optional modules)
- Relay Outputs: RUN, TOR, Event (normally open)
- Digital Inputs: 3 programmable inputs plus Start/Stop/Reset
- Protection Functions: Current limit, motor heating, electronic overload relay
- Special Functions: Kickstart, pump cleaning, jog, braking, stand-still brake, diagnostics, sequence start, emergency/fire pump mode
- Customs Tariff Code: 85371091
- Standards: IEC 60529, IEC 60947-1, EN 60529
Measurements
- Weight: 25 kg
- Dimensions: 493 mm (H) x 361 mm (W) x 282 mm (D)
- Package Weight: 29 kg
- Package Dimensions: 650 mm (H) x 470 mm (W) x 381 mm (D)
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
Need More?
Contact Us
we're here to support your business.
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator