Vision Systems

0.00 kr

Sold Out

Specifications

Model		IV4-CU1
Compatible sensor		IV4-400CA/IV4-500CA/IV4-600CA IV4-400MA/IV4-500MA/IV4-600MA
Supported networks		PROFINET, EtherCAT®, TCP/IP no procedure communication, SNTP client, FTP client, SFTP client, OPC UA server, MQTT client, HTTP, HTTPS
Ethernet specifications	Transmission speed	100 Mbps
	Connector specifications	M12 (D) 4-pin female connector
	Number of connectors	2 ports
Supported functions	EtherCAT®	CoE
	PROFINET	Conformance Class C
Power supply		Power supplied via connected sensor
Environmental resistance	Enclosure rating	IP67 ^*1
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density:0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² in 6 directions, 3 times respectively
Material		Front case/back cover: PBT Transparent back lid: PES Rear case: Aluminum die-casting Ethernet connector: Copper alloy + gold plating Nameplate: PC Waterproof Ethernet connector cap: PC ^*2
Weight		Approx. 210 g 7.41 oz
^1 Applicable only when mounted to a sensor. ^2 ESD-safe, IEC61340-5-1–compliant.

Keyence GS-T01 Keyence

12,388.00 kr

Only 2 units left

Specifications

Model		GS-T01
Response time (ms)	Lock / Unlock	Response time of GS-M/GS + 110 ms + 70 ms × (number of cascaded unit -1)^*1
	OSSD	Response time of GS-M/GS ^*2
	AUX	Response time of GS-M/GS + 60 ms + 30 ms × (number of cascaded unit -1)
AUX (Non-safety related output)	Output	Transistor output × 8
	Max. load current	20 mA
	Residual voltage (during ON)	Max. 2.5 V (with a cable length of 2 m 6.6')
Lock control input		Approx. 2.5 mA×2
Protection circuit		Reverse current protection, short-circuit protection and surge protection
Power supply	Power voltage	24 V DC ±20 % (Ripple P-P 10% or less, Class2)
	Power consumption	0.8 W
Environmental resistance	Operating ambient temperature	-20 to 55°C -4°F to 131°F (No freezing)
	Operating relative humidity	5% to 95%RH
	Storage temperature	-25 to 70°C -13°F to 158°F(No freezing)
	Storage relative humidity	5% to 95%RH
	Vibration resistance	10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance	30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material		Case: PBT Cable:PVC
Weight		Approx. 290 g 10.23 oz
^1 When using the GS-71PC, the response time from "Unlock" to "Lock" increases by 200 ms per unit. ^2 When using the GS-71PC, the response time is fixed at 20 ms + 2 ms x (number of cascaded units-1), and the "Sar" is fixed at 10.5 mm 0.41".

Keyence BL-780 Keyence

28,734.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AS-440-SO Keyence

22,560.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ES-11AC Keyence

0.00 kr

Sold Out

Specifications

Model		ES-11AC^*1
Type		AC
Operation mode		N.O.
Indicator		Output: Red LED
Output	Control output	Thyristor 240 VAC, 5 to 300 mA
Disconnection alarm output		―
Leakage current (OFF time)		0.2 mA max.
Response time		10 ms max.
Temperature characteristics		±8% of detecting distance at 23°C 73.4°F, within 0 to 50°C 32 to 122°F
Sensitivity adjustment		15-turn trimmer
Rating	Power voltage	85 to 240 VAC 50/60 Hz
	Current/power consumption	1 VA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 125 g
^*1 This product does not comply with the EMC directive.

Keyence CA-LAR8 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-LAR8
Focal point				8.5 mm 0.33"
F-stop range (aperture)				F1.8 to F16
Minimum WD				0.05 m 0.16'
Mount				C-mount
Filter size				M46 × P0.75
Compatible image sensor size				2/3"
TV distortion				0.02%
Resolving power				250 cycles/mm at center, 160 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE, BAND MULTICOATING
Weight				Approx. 180 g 6.35 oz

Keyence FD-SCB3 Keyence

13,090.00 kr

Only 5 units left

Buy the Keyence FD-SCB3 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-SCB3 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence ER-GW18P Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GW18P
Type		Weld-resistant all-metal shielded type Screw type M18 Cable PNP output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	10 mm 0.39" ±10% ^*2
	With distance switching (Mode 2)	5 mm 0.20" ±10% ^*2
Response frequency		2 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (+55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +85°C -13°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G² /Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS303 with ceramic coating, Button: PBT, Nut: SUS303 with ceramic coating, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 110 g 3.88 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence OP-88159 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88159
Type				Sensor head mounting bracket R (Optional)
Material				SUS303

Keyence MU-N11 Keyence

3,776.00 kr

Only 6 units left

Specifications

Model		MU-N11
Main unit/Expansion unit		Main unit
Response time		Depends on the connected sensor model^*1
Expansion units		Up to 4 expansion units^*2
I/O	Control output	4 max., NPN open collector/PNP open collector selectable, 24 V or less, Main unit: 50 mA or less^3, Expansion unit: 20 mA or less, Residual voltage: 2 V or less, N.O./N.C. selectable ^1^*4
	External input	5 max., Short-circuit current: NPN: 1 mA or less, PNP: 2 mA or less, For the applied voltage, see wiring diagrams (page 3 of the instruction manual) ^1^4
	Analog output	1 max., Current output/ Voltage output selectable, Current output: 4 to 20 mA, Max. load resistance: 450 Ω, Voltage output: 0 to 10 V, External load resistance: 5 kΩ or more ^1^4
Protection circuit		Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection
Power supply	Power voltage	24 VDC, ripple (P-P) 10% or less, Class 2 or LPS
	Current consumption	70 mA or less (without load)^*5
Sensor connection specification	Allowable sensor current	150 mA or less
N-bus connection specification	Allowable passing current	1200 mA or less
Environmental resistance	Ambient temperature	-20 to +50 °C -4 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case and dust cover: Polycarbonate Buttons: Polyacetal Display panel: PMMA
Weight		Approx. 70 g
^1 The response time, as well as the types and number of inputs and outputs that are available, vary depending on the connected sensor model. For details, see the specific "MU-N Series User's Manual" for the model that will be connected. ^2 Up to 5 N-bus devices, including the main unit (or network unit), can be linked together. ^3 20 mA or less: When using the expansion unit. ^4 For more information on Control output, External input, and Analog output wire allocation, please refer to the table of "Power Cable Pin Layout" on page 3 of this manual. ^*5 1500 mA or less when a sensor is attached, 4 outputs (with loads) are used, and expansion units are connected.

Keyence EM-038 Keyence

20,536.00 kr

Only 2 units left

Specifications

Model		EM-038
Type		Shielded
Shape		3.8 mm 0.15" dia Cylindrical.
Detecting distance		0.8 mm 0.031" ±15%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		5 x 5 mm 0.20"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Output		NPN
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*1
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 38 g (including nuts and 2-m 6.6' cable)
^*1 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence VT3-V6H Keyence

46,868.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FD-GD80U Keyence

0.00 kr

Sold Out

Specifications

Model				FD-GD80U
Pipe size/Outer diameter				3" (80 A) ø86 to ø92 mm ø3.39" to ø3.62"
Weight				Approx. 0.46 kg

Keyence BL-N70UBE Keyence

7,203.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NR-2010 Keyence

9,582.00 kr

Only 3 units left

Buy the Keyence NR-2010 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence NR-2010 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FD-EPH12 Keyence

10,252.00 kr

Only 1 unit left

Specifications

Model				FD-EPH12
Pipe size	Outer diameter of pipe			ø12 0.47" ^*1
	Compatible outer diameter range	Polyurethane		12.0 ±0.15 mm 0.47" ±0.006"
		Nylon		12.0 ±0.1 mm 0.47" ±0.004"
	Pipe materials			Resin pipe connectible to a one-touch coupling
Supported gases				Air, nitrogen, argon, and non-corrosive gases^*2
Supported gas temperature				−10°C to +60°C 14 to 140°F
Pressure resistance				1 MPa
Flow rate detection principle				Ultrasonic transmission time difference method
Flow rate specifications	Rated flow rate	(volume flow rate)		250 L/min 8.83 CFM
		(20°C 68°F, atmospheric pressure conversion) * Initial display	Gas at 20°C 68°F, 0.0 MPa
			Gas at 20°C 68°F, 0.2 MPa	750 L/min 26.5 CFM
			Gas at 20°C 68°F, 0.4 MPa	1250 L/min 44.1 CFM
			Gas at 20°C 68°F, 0.6 MPa	1750 L/min 61.8 CFM
	Measurement accuracy			±(2.0% of RD+1.0% of F.S.)^3^4
	Repeatability			Response time of 250 ms: ±2.5% of F.S.^3^5
Pressure specifications	Rated pressure			−100 kPa to +0.75 MPa * However, the flow rate cannot be measured in the range of −100 to −30 kPa.
	Overall accuracy			±2.0% of F.S.^*3
	Repeatability			Response time of 2.5 ms: ±0.4% of F.S.
Display resolution	Instantaneous flow			0.1/1 L/min
	Accumulated flow			0.1/1/10/100/1000 L
	Pressure			0.1/1 kPa
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient temperature			−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity			35%RH to 85%RH (no condensation)
	Vibration resistance			10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance			100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit (parts that do not contact the gas)			PBT/PAR/iron/Brass electroless nickel plating/POM/NBR/stainless steel/aluminum
	Flow channel (parts that contact the gas)			PBT/Brass electroless nickel plating/NBR/nylon
Weight				Approx. 201 g 7.09 oz
^1 To ensure stable detection, it is recommended to use a pipe inner diameter that is at least equivalent to the inner diameter of this product. ^2 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^3 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas. ^4 This specification is valid when sufficient straight sections of pipe are provided and the flow velocity distribution is stable. This value does not take into account the effects of fluctuations in flow velocity distribution due to facility factors. ^*5 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x.

Keyence OP-84385 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84385
Type				Auxiliary support for air booster

Keyence VT-AT10 Keyence

0.00 kr

Sold Out

Specifications

Model				VT-AT10
Type				10" attachment
Applicable product				VT5-X10
Note				For switching from 10" VT3/VT2/VT Series to VT5-X10

Keyence OP-87749 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87749
Type				Work holding pulley
Number included				1 pc
Weight				300 g

Keyence OP-89244 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-F5200C Keyence

0.00 kr

Sold Out

Specifications

Model		MD-F5200C^*1
Type		Marking unit (Controller + Head) 50 W, Standard area
Console (sold separately)		MC-P1
Marking method		XYZ 3-axis simultaneous scanning method
Marking laser	Type	Yb: Fiber laser (Class 4 laser product; IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*2, GB7247.1)
	Wavelength	1090 nm
	Output	50 W
Applicable regulations		EU directive (EMC directive, machinery directive, RoHS directive), EN standard (EN 55011, EN ISO 11553-1, EN 60204-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1-12, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Pulse frequency		60 to 120 kHz
Guide laser/Working distance pointer		Semiconductor laser, Wavelength: 655 nm, Output: 1.0 mW (Class 2 laser product; IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*2, GB7247.1)
Marking area		125 × 125 × 42 mm 4.92" × 4.92" × 1.65"
Standard working distance (±variable width)		168 mm (±21 mm) 6.61" (±0.83")
Marking resolution		2 µm 0.08 Mil
Scan speed		Max. 12000 mm/s 472.44"/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), User fonts, True Type fonts
	Barcode	CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, Micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo CAD data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary/moving marking (constant speed/encoder)
	Character size (marking height/width)	0.1 to 125 mm 0.004" to 4.92"
	No. of registered programs	Max. 2000 programs
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O, MIL connector I/O, Connector control I/O
Interface		RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)^*3
Head installation direction		All directions
Head cable length		4.0 m 13.1'
Cooling method		Controller: Forced air cooling, Head: Natural air cooling
Rated voltage and power consumption		Single-phase 100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, Max. 750 VA
Environmental resistance	Enclosure rating	IP64 (Head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 25.5 kg Head: 6.7 kg Console: 2.0 kg
^1 Type equipped with contactor control terminal block ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^*3 The USB port is designed for use with USB memory sticks, barcode readers, mouses (A connector), and Marking Builder 3 (ActiveX) (B connector). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, PROFINET connection, and EtherNet/IP™ connection.

Keyence SV-CN3 Keyence

0.00 kr

Sold Out

Specifications

Model				SV-CN3
Type				Encoder and motor power connector set
Note				for 750 W motor

Keyence SV2-M010AK Keyence

4,615.00 kr

Only 3 units left

Specifications

Model				SV2-M010AK
General specifications	Applicable servo amplifier			SV2-010L2
	Rated output			100 W
	Rated torque			0.318 N·m ^*1
	Instant maximum torque			1.11 N·m
	Rated current			0.85 Arms
	Instant maximum current			3.1 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.413 N·m/Arms
	Rotor moment of inertia			0.0659 ×10^-4kg·m²
	Rated power rating			15.3 kW/s
	Rated angle acceleration			48200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			35 ×
	Approx. weight			0.4 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence AT3-400 Keyence

9,375.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.