Vision Systems

111,616.00 kr

Only 1 unit left

Specifications

Model		VHX-S750E
XYθ stage	XY stage: Motorized/Manual	Motorized
	XY motorized stage motor	2-phase stepping motor
	XY motorized stage resolution	1 µm (typical)
	XY motorized stage movement speed	10 mm 0.39"/sec (max)
	XY-stage movement range	±20 mm ±0.79"
	θ rotation angle	±90°
	XYθ stage size	Top surface: 171 × 168 mm 6.73" × 6.61" (center disk: ø100 ø3.94")
	Transmitted lighting	20x or higher
Focus Z axis	Z stage: Motorized/Manual	Motorized
	Z motorized stage motor	5-phase stepper motor
	Z motorized stage resolution	0.1 μm (typical)
	Z motorized stage travel speed	17 mm 0.67" /sec (max)
	Z stage travel range	49 mm 1.93"
Stage Z axis	Z stage: Motorized/Manual	Motorized
	Z motorized stage motor	2-phase stepping motor
	Z motorized stage resolution	1 µm (typical)
	Z motorized stage travel speed	10 mm 0.39"/sec (max)
	Z stage travel range	50 mm 1.97"
Side camera		Yes, VGA
Load capacity		5 kg
Ratings	Power voltage	100 to 240 VAC ±10%, 50/60 Hz
	Power consumption	130 VA
Environmental resistance	Ambient temperature	+5 to 40°C +41 to 104 °F
	Relative humidity	20 to 80% RH (no condensation)
Weight		23.8 kg

Keyence SV-C20F Keyence

0.00 kr

Sold Out

Specifications

Model				SV-C20F
Type				Motor power cable, Standard
Length				20 m 65.6'
Note				for 3 kW / 5 kW motor

Keyence BC-1000 Keyence

0.00 kr

Sold Out

Specifications

Model		BC-1000
Camera	High resolution	5472 × 3648
	CMOS	20 megapixels
Counting	Measurement area	ø105 mm ø4.13"
	Supported samples	Petri dishes, well plates, and culture film
Observation	Front camera	Included (with variable tilting and support for 2D codes)
	Lighting type	Automatic variable illumination (Epi-lighting, transmitted ring, transmitted coaxial, diffuse transmitted coaxial, mixed, etc.)
	Lens	Proprietary high-resolution lens
	Image format	JPEG, TIFF
Recording	Output format	Excel, PDF, CSV
Operation	Center console	Included
Dimensions	Outer dimensions	364 × 518 × 615 mm 14.33"×20.39"×24.21"
Software	Supported OS	Windows 11, Windows 10
Power supply	Power voltage	100 to 240 VAC ±10%, 50/60 Hz
	Power consumption	240 VA
Environmental resistance	Ambient temperature	+15°C to 35°C +59°F to 95°F
	Relative humidity	35% to 80% RH (no condensation)
Weight		23 kg 50.71 lb (Main unit)

Keyence SJ-U1 Keyence

5,181.00 kr

Only 4 units left

Specifications

Model		SJ-U1
Rating	Rating input	100 to 240 VAC (50/60Hz) 96VA^*1
	Rated output	24 VDC 1.67A
^*1 The included AC cable has power rating of 125 V for use in Japan.

Keyence OP-88830 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence NX-C08R Keyence

1,946.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VH-K150 Keyence

0.00 kr

Sold Out

Specifications

Model				VH-K150
Type				Variable illumination adapter
Note				This is an optional accessory for the VH-Z150.

Keyence LT-8120 Keyence

8,318.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-5000 Keyence

33,842.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-SA20F Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SA20F
Type				Protection cover Flat type for 20 beam axes
Overview				This protective case protects the main unit from impacts.
Applicable product				GL-S20FH
Number included				1
Length				422.6 mm 16.64"
Material				aluminum
Note				2 each of the following are included: hexagon socket head cap screw (width across flats: 3 mm), washer, and special hexagon socket head cap screw (M4, length: 13 mm, width across flats: 3 mm).
Weight				140 g

Keyence KV-XCM02 Keyence

15,909.00 kr

Only 6 units left

Specifications

Model				KV-XCM02
General specifications	Power voltage			System configuration using a KV-5000/3000 Series expansion unit: 24 VDC (±10%) System configuration using only a KV‑8000/7000 Series expansion unit: 24 VDC (−15%/+20%) ^*1
	Operating ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: 0 to +50°C 32 to 122°F (No freezing) System configuration using only a KV‑8000/7000 Series expansion unit: 0 to +55°C 32 to 131°F (No freezing) ^2^3
	Operating ambient humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Storage ambient temperature			System configuration using a KV-5000/3000 Series expansion unit: −20 to +70°C -4 to +158°F System configuration using only a KV‑8000/7000 Series expansion unit: −25 to +75°C -13 to +167°F ^*2
	Storage relative humidity			System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation) System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation) ^*2
	Operating environment			No dust or corrosive gas
	Operating altitude			2000 m 6561.7' or less
	Noise immunity			1500 Vp-p or more; Pulse duration: 1 μs, 50 ns (based on noise simulator); IEC standard-compliant (IEC 61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for one minute (between the power terminals and the I/O terminals, and between the external terminals and the case)
	Insulation resistance			50 MΩ or more (between the power terminals and the I/O terminals and between the external terminals and the case, with 500 VDC megohmmeter)
	Vibration resistance	Intermittent vibration	Frequency 5 to 9 Hz	Half amplitude 3.5 mm 0.14"^*4
			Frequency 9 to 150 Hz	Acceleration 9.8 m/s² 32.2'/s²^*4
		Continuous vibration	Frequency 5 to 9 Hz	Half amplitude 1.75 mm 0.07"^*4
			Frequency 9 to 150 Hz	Acceleration 4.9 m/s² 16.1'/s²^*4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², Application time: 11 ms, 2 times in each of the X, Y, and Z directions
	Pollution degree			2
Common specifications	Connectable CPU unit			KV-X Series/KV-8000A
	Max. number of connectable units			14
	Connection interface			RJ-45 8-position modular connector × 2 ports
	Transmission rate			10BASE-T: 10 Mbps 100BASE-TX: 100 Mbps 1000BASE-T: 1000 Mbps ^*5
	Transmission media			10BASE-T: Category 3 or higher UTP or STP (STP is recommended) 100BASE-TX: Category 5 or higher UTP or STP (STP is recommended) 1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recommended) ^*6
	Maximum cable length			100 m 328.1'^*7
	Maximum number of connectable hubs			10BASE-T: 4 100BASE-TX: 2 1000BASE-T: 1 ^*8
	Ethernet functions			Socket communication, FTP server, FTP client, upper link communication, etc.
	Internal current consumption			200 mA or less
	Weight			Approx. 190 g 6.71 oz
Compatibility specifications	Supported databases			Microsoft SQL Server, PostgreSQL, MariaDB, MySQL, Oracle Database^*9
	Maximum number of connections			4
	Supported SQL			INSERT^10, UPDATE, SELECT^10, DELETE, TRUNCATE, Stored procedure/Stored function execution
	Maximum number of supported columns			1024 (Microsoft SQL Server); 1000 (PostgreSQL, MariaDB, MySQL, Oracle Database)
	Maximum record storage size			200000 bytes^*11
	Buffer retransmission function			Function that buffers SQL statements if communication fails to enable retransmission when communication is restored Maximum buffer capacity: 1 GB per connection (SD card required)
^1 Supplied via the CPU unit or expansion unit. ^2 Guaranteed range in which the system can be used. ^3 Specified according to the temperature in the control panel on the lower side of the unit. ^4 Compliant with JIS B 3502 and IEC 61131-2, 10 times in each of the X, Y, and Z directions (for 100 min.) ^5 10 Mbps/100 Mbps/1000 Mbps MDI/MDI-X automatic switching function supported. ^6 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable ^7 The maximum cable length refers to the distance between the KV-XCM02 and the Ethernet switch. ^8 The maximum number is not limited when an Ethernet switch is used. ^9 Refer to the manual for supported database versions. ^10 Multi-extraction/insertion supported. ^*11 This is the maximum size of the data saving area reserved for CPU unit devices.

Keyence VJ-3002 Keyence

28,239.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88831 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PJ-V21R Keyence

7,206.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89022 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89022
Length				10 m 32.8'

Keyence OP-88906 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88906
Female				M12 4-pin straight
Male
Length				5 m 16.4'
Material				cable: PVC connector: SUS316L

Keyence FD-EPH8 Keyence

5,373.00 kr

Only 5 units left

Specifications

Model				FD-EPH8
Pipe size	Outer diameter of pipe			ø8 0.31" ^*1
	Compatible outer diameter range	Polyurethane		8.0 ±0.1 mm 0.31" ±0.004"
		Nylon		8.0 ±0.08 mm 0.31" ±0.003"
	Pipe materials			Resin pipe connectible to a one-touch coupling
Supported gases				Air, nitrogen, argon, and non-corrosive gases^*2
Supported gas temperature				−10°C to +60°C 14 to 140°F
Pressure resistance				1 MPa
Flow rate detection principle				Ultrasonic transmission time difference method
Flow rate specifications	Rated flow rate	(volume flow rate)		100 L/min 3.53 CFM
		(20°C 68°F, atmospheric pressure conversion) * Initial display	Gas at 20°C 68°F, 0.0 MPa
			Gas at 20°C 68°F, 0.2 MPa	300 L/min 10.59 CFM
			Gas at 20°C 68°F, 0.4 MPa	500 L/min 17.7 CFM
			Gas at 20°C 68°F, 0.6 MPa	700 L/min 24.7 CFM
	Measurement accuracy			±(2.0% of RD+1.0% of F.S.)^3^4
	Repeatability			Response time of 250 ms: ±2.5% of F.S.^3^5
Pressure specifications	Rated pressure			−100 kPa to +0.75 MPa * However, the flow rate cannot be measured in the range of −100 to −50 kPa.
	Overall accuracy			±2.0% of F.S.^*3
	Repeatability			Response time of 2.5 ms: ±0.4% of F.S.
Display resolution	Instantaneous flow			0.01/0.1 L/min
	Accumulated flow			0.01/0.1/1/10/100 L
	Pressure			0.1/1 kPa
Environmental resistance	Enclosure rating			IP65 (IEC60529)
	Ambient temperature			−10°C to +60°C 14 to 140°F (no freezing)
	Relative humidity			35%RH to 85%RH (no condensation)
	Vibration resistance			10 to 500 Hz, power spectral concentration: 0.816 G²/Hz, XYZ axes
	Shock resistance			100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Material	Sensor unit (parts that do not contact the gas)			PBT/PAR/iron/Brass electroless nickel plating/POM/NBR/stainless steel/aluminum
	Flow channel (parts that contact the gas)			PBT/Brass electroless nickel plating/NBR/nylon
Weight				Approx. 145 g 5.11 oz
^1 To ensure stable detection, it is recommended to use a pipe inner diameter that is at least equivalent to the inner diameter of this product. ^2 Gases that transmit ultrasonic waves. Measurement may be unstable due to the pressure inside of the pipe and the type of gas. ^3 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by factors such as the condition and type of pipes as well as the temperature and type of gas. ^4 This specification is valid when sufficient straight sections of pipe are provided and the flow velocity distribution is stable. This value does not take into account the effects of fluctuations in flow velocity distribution due to facility factors. ^*5 Accuracy improves with longer response times. As a rule, this is by a proportion of √(250 ms/response time)x.

Keyence MU-CB6 Keyence

0.00 kr

Sold Out

Specifications

Model				MU-CB6
Type				Power cable
Applicable product				MU-N Series
Cable end				Cable end: 6-core loose wires, Controller side: Connector
Length				2 m 6.56'
Material				PVC (Polyvinyl chloride)
Note				Expansion unit
Weight				Approx. 130 g

Keyence GL-SP2N1 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-SP2N1
Type				One-line systemdedicated cable
Applicable product				GL-S Series main unit
Number included				1
Cable end				Main unit connection connector - Loose wires
Output				NPN
Number of core				6
Length				2 m 6.56'
Weight				60 g

Keyence ER-NH035F Keyence

0.00 kr

Sold Out

Specifications

Model		ER-NH035F
Cable		Standard
Stable detection range		0 to 1 mm 0 to 0.04" ^1 ^2
Maximum operating distance		3 mm 0.12" ^1 ^3
Hysteresis distance		Adjustable
Repeatability		1 μm 0.04 Mil ^1 ^4
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		5 × 5 mm 0.20" × 0.20"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (0 to +50°C 32°F to 122°F) ±15% or less of detecting distance at +25°C +77°F (-10 to 0°C 14°F to 32°F, +50 to +60°C 122°F to 140°F) (For ER-NH028/038/035F/028U) -10 to +15 % or less of detecting distance at +25°C+77°F (0 to +50°C 32°F to 122°F), -15 to +20 % or less of detecting distance at +25°C +77°F (-10 to 0°C 14°F to 32°F, +50 to +60°C 122°F to 140°F) ^1 ^6
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-10 to +60°C 14°F to 140°F (no freezing)
	Relative humidity	Up to 85% RH (No condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material	Detection surface	Epoxy resin
	Case	SUS304
	Cable	PVC
	Sensor head connector	PA66, polycarbonate
	Accessories	M2 screw/nut/spring washer/ flat washer: Iron nickel plating
Accessories		M2 screw/nut/ spring washer/ flat washer ×2 each
Weight		Approx. 40 g 1.41 oz
^1 The stable detection range, maximum operating distance, repeatability, and temperature characteristics are values for when the operation mode is set to “Normal” using a standard detection object. ^2 The range where 2-point adjustment is normally possible with a detectable object placed within this range and with no detectable object. The stable detection range becomes narrower when in magnetic metal / non-magnetic metal mode. ^3 The maximum distance of the stable detection range and the distance that can be detected under constant temperature when 2-point adjustment is used with no detectable object and the set value is set appropriately. ^4 Values obtained by converting the fluctuation range of the detection amount to the detecting distance under a constant environment using KEYENCE default settings. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 The value when using the 2-point adjustment function at a distance of 25% of the stable detection range with no detectable object and a standard detectable object at a distance of 50% of the stable detection range.

Keyence SJ-E084H Keyence

0.00 kr

Sold Out

Specifications

Model		SJ-E084H
Ion generation method		Corona discharge method
Structure		Shockless resistive coupling type
Voltage application method / Applied voltage		Pulse AC method/±8000 V
Ion balance control method		Hi-Power I.C.C. method
Ion balance		±30 V^*1
Installation distance		50 to 2000 mm 1.97" to 78.74"
Control input	Static elimination stop input	NPN open collector or contact point signal without voltage
Control output	Ion level warning, condition warning, alarm output	NPN open collector, Maximum 100 mA (40 VDC or less)
	Condition alarm output
	Alarm output
Communication function		Remote control communication
Major functions		Condition alarm, ion level alarm, alarm output
Air connection port		Rc 1/8
Air supply pressure		0.1 MPa to 0.5 MPa^*2 (recommended air pressure of 0.2 MPa)
Effective length		900 mm 35.43"^*3
Total length		800 mm 31.50"
No. ofelectrodes		25
Rating	Power voltage	24 VDC to 36 VDC ±10%
	Current consumption	700 mA (at 24 V), 500 mA (at 36 V)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material	Electrode probe	Tungsten
	Main body	ABS/PBT/PP/LCP/PPS/SPS/SUS
Weight		1100 g 38.80oz
^1 Measured under the following conditions. Installation distance: 300 mm 11.81" or more, Air supply pressure: 0.2 Mpa, Frequency: The highest device driving frequency, Operating ambient temperature: 0 to +40°C 32 to 104°F, Operating ambient humidity: 35 to 65% RH ^2 Contact KEYENCE when using the air purge function with intermittent air supply. ^*3 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence SV2-M020AK Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-M020AK
General specifications	Applicable servo amplifier			SV2-020L2
	Rated output			200 W
	Rated torque			0.637 N·m ^*1
	Instant maximum torque			2.23 N·m
	Rated current			1.6 Arms
	Instant maximum current			5.8 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.444 N·m/Arms
	Rotor moment of inertia			0.263 ×10^-4kg·m²
	Rated power rating			15.4 kW/s
	Rated angle acceleration			24200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			15 ×
	Approx. weight			0.8 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence OP-80107 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-95S Keyence

4,293.00 kr

Only 2 units left

Specifications

Model		FU-95S
Type		Liquid-level detection fiber unit
Detecting method		Pipe mounting type
No. of beam axes		16 mm0.63"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Minimum bend radius		R5 mm0.197"
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Accessories		Binding band × 2, nonslip rubber × 2, Fiber cutter × 1
Weight		Approx. 23 g