keyence

0.00 kr

Sold Out

Specifications

Model		SJ-H300C
Type		HC
Ion generation method		Corona discharge
Structure		Shock-proof, resistance-coupled
Voltage application method/applied voltage		Pulse AC method/±7000 V
Ion balance control method		Dual I.C.C. method
Ion balance		±30 V ^*1
Cleanliness		ISO 14644-1 Class 2 ^*2
Operating distance		50 to 2000 mm 1.97" to 78.74"
Control input		NPN open collector or non-voltage contact signal
Control output		NPN type photorelay, 100 mA max. (at 40 V max.)
Major functions		Condition alarm output, ion level alarm output, alarm output
Air purge connection port		Rc 1/8
Air purge supplied pressure		0.5 MPa or less ^*3
Effective length		3000 mm 118.11" ^*4
No. ofelectrodes		48
Static elimination bar length		2960 mm 116.54"
Rating	Power voltage	24 VDC-36 V±10%
	Current consumption	500 mA (at 24 VDC)/350 mA (at 36 VDC)
	Overvoltage category	I
	Pollution degree	2
Environmental resistance	Ambient temperature	0 to +40°C 32.0°F to 104.0°F
	Relative humidity	35 to 85% RH (No condensation)
Material	Electrode probe	Silicon
	Main unit	ABS resin/PC
Weight	Static elimination bar	3150 g 111.11 oz
^1 Value measured under the following conditions: Operating distance: 300 mm 11.81" Air supply pressure: 0.2 MPa Frequency: 68 Hz Ambient operating temperature: 0 to +40°C 32.0°F to 104.0°F Ambient operating humidity: 35 to 65%RH Measurement position: Center of bar Under a 0.3 m/s 1.0 ft/s downflow ^2 Contact KEYENCE for detailed conditions. ^3 Contact KEYENCE when using the air purge function with intermittent air supply. ^*4 Effective length is for static elimination range when installation distance is 50 mm 1.97".

Keyence SJ-HM01 Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-HM01
Overview				Used over areas where auxiliary air should not be used.

Keyence SJ-HS01 Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-HS01
Type				Straight air booster starter unit

Keyence SJ-HS02 Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-HS02
Type				Extension unit for straight air booster

Keyence SJ-HW01 Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-HW01
Type				Wide angle booster starter unit Used to widen the static elimination range.

Keyence SJ-HW02 Keyence

0.00 kr

Sold Out

Specifications

Model				SJ-HW02
Type				Extension unit for wide angle booster Used to extend the auxiliary air diffusion unit.

Keyence SJ-L005F Keyence

7,540.00 kr

Only 6 units left

Specifications

Model		SJ-L005F
Voltage application method		High frequency AC method
Applied voltage		3 kVAC
Ion balance		±10 V ^*1
Installation distance		50 mm 1.97 " or greater
Maximum air speed		7 m/s ^*1
Maximum air flow		0.16 m³/min
Ozone concentration		0.05 ppm or less ^*1
Control input	Static elimination stop input	Can switch between “non-voltage input” and “voltage input” ^2^3 For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) For voltage input: Maximum input rating 30 V , ON voltage 18 V or higher, OFF current 0.1 mA or lower, ON current 1 mA or lower (at 30 V)
Control output	Alarm (N.C.) /Ion level alarm (N.O.)	Open collector output: 30 V DC or less Maximum 50 mA or lower, Residual voltage 1 V or lower Switchable between NPN/PNP settings ^2^3
Power supply	Power voltage	24 V DC ±10 % (including ripple) or 12 V DC (dedicated AC adapter OP-88020/87722 ^*4)
	Power consumption	310 mA or less (for 24 V DC) 600 mA or less (for 12 V DC)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to +122 °F (When using OP-87722, 0 to +40 °C 32 to +104 °F)
	Relative humidity	35 to 65 % RH (assuming no condensation)
	Overvoltage category	I
	Pollution degree	2
Weight		Approx. 100 g (main unit weight)
^1 Measurement results taken with an installation distance of 100 mm 3.94 " , maximum air flow and no air filter. (Representative values) ^2 Cannot be used when the power supply is an AC adapter ^3 “Static elimination stop input” and “ion level alarm output” are allocated to the white line using the setting switch. ^4 Rated input of 100 to 240 V AC , 50/60 Hz

Keyence SJ-L005G Keyence

17,023.00 kr

Only 4 units left

Specifications

Model		SJ-L005G
Voltage application method		High frequency AC method
Applied voltage		3.2 kVAC
Ion balance		±10 V^*1
Static elimination time		0.4 sec.^*1
Operating distance		50 mm 1.97" or more
Air supply pressure		0.05 to 0.7 Mpa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø8 0.31", inner diameter: ø6 0.24"
Ozone concentration		0.05 ppm or less^*2
Ratings	Power voltage	12 VDC (dedicated AC adapter OP-88020/87722 ^*3)
	Current consumption	0.3 A max.
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Drop resistance		Onto concrete from a height of 2.0 m 6.6'^*4
Material		Main unit case: PC / Status indicator: TPU / Cable: PVC, copper alloy Main unit connector: PBT, brass + Ni plating, brass + gold plating Protection rubber: HNBR (tip side), NBR (connector side)
Weight		Approx. 320 g
^1 Measurement results taken with an installation distance of 150 mm 5.91" and air supply pressure of 0.2 MPa (typical values) ^2 Measurement results taken with an installation distance of 100 mm 3.94" and air supply pressure of 0.1 MPa (typical values) ^3 Rated input of 100 to 240 VAC, 50/60 Hz ^4 This is a typical value under KEYENCE measurement conditions and not a guaranteed value.

Keyence SJ-L005M Keyence

11,211.00 kr

Only 5 units left

Specifications

Model		SJ-L005M
Type		Nozzle type
Voltage application method		High frequency AC method
Applied voltage		2.2 kVAC
Ion balance		±10 V^*1
Static elimination time		0.4 sec.^*1
Air supply pressure		0.05 to 0.5 MPa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø6 0.24", inner diameter: ø4 0.16"
Ozone concentration		0.05 ppm or less^*2
Control input	Static elimination stop input	Switchable between non-voltage input and voltage input Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON voltage 7 V or higher, OFF current 0.1 mA or lower, ON current 1.5 mA or lower (at 30 V)^*3
	Reset input
	LPC mode input
Control output	Alarm (N.C.)/Ion level alarm (N.O.)	Open-collector output 30 VDC or less 50 mA max., residual voltage 1.5 V or less NPN/PNP settings switchable^3^4
Ratings	Power voltage	24 VDC ±10% (including ripple) or 12 VDC (dedicated AC adapter OP-88020/87722^*5)
	Current consumption	0.2 A or less (24 VDC) 0.3 A or less (12 VDC)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Material		Main unit case: PBT / Charge indicator: TPU / Securing bracket: SUS303, PBT Cable: PVC, TPE, copper alloy Connector: PBT, brass + gold plating, phosphor bronze + gold plating, coper alloy + gold plating Fitting: Brass + electroless Ni plating, POM, NBR
Weight		Approx. 60 g
^1 Measurement results taken with an installation distance of 150 mm 5.91", air supply pressure of 0.2 MPa, and a nozzle angle of 90° (typical values) ^2 Measurement results taken with an installation distance of 100 mm 3.94", air supply pressure of 0.1 MPa, and a nozzle angle of 90° (typical values) ^3 Cannot be used when the power supply is the AC adapter. ^4 To use the ion level alarm with the tube type, use it with air supply pressure of 0.3 MPa or less. ^*5 Rated input of 100 to 240 VAC, 50/60 Hz

Keyence SJ-L005MT Keyence

15,822.00 kr

Only 2 units left

Specifications

Model		SJ-L005MT
Type		Tube type
Voltage application method		High frequency AC method (68 kHz)
Applied voltage		2.5 kVAC
Ion balance		±10 V^*1
Static elimination time		See Data Sheet.
Air supply pressure		0.05 to 0.5 MPa
Air supply temperature		0 to +50°C 32 to 122°F
Connection tube		Outer diameter: ø6 0.24", inner diameter: ø4 0.16"
Ozone concentration		0.05 ppm or less^*2
Control input	Static elimination stop input	Switchable between non-voltage input and voltage input Non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA or lower (short circuit) Voltage input: Maximum input rating 30 V, ON voltage 7 V or higher, OFF current 0.1 mA or lower, ON current 1.5 mA or lower (at 30 V)^*3
	Reset input
	LPC mode input
Control output	Alarm (N.C.)/Ion level alarm (N.O.)	Open-collector output 30 VDC or less 50 mA max., residual voltage 1.5 V or less NPN/PNP settings switchable^3^4
Ratings	Power voltage	24 VDC ±10% (including ripple) or 12 VDC (dedicated AC adapter OP-88020/87722^*5)
	Current consumption	0.2 A or less (24 VDC) 0.3 A or less (12 VDC)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (0 to +40°C 32 to 104°F when OP-87722 is used)
	Relative humidity	35 to 65% RH (no condensation)
	Overvoltage category	I
	Pollution degree	2
Material		Main unit case: PBT / Charge indicator: TPU / Securing bracket: SUS303, PBT Cable: PVC, TPE, copper alloy Connector: PBT, brass + gold plating, phosphor bronze + gold plating, coper alloy + gold plating Fitting: Brass + electroless Ni plating, POM, NBR
Weight		Approx. 65 g
^1 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 50 mm 1.97", and air supply pressure of 0.2 MPa (typical values) ^2 Measurement results taken with tube length of 500 mm 19.69", an installation distance of 300 mm 11.81", and air supply pressure of 0.1 MPa (typical values) ^3 Cannot be used when the power supply is the AC adapter. ^4 To use the ion level alarm with the tube type, use it with air supply pressure of 0.3 MPa or less. ^*5 Rated input of 100 to 240 VAC, 50/60 Hz

Keyence SJ-LM1 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-LM2 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M010 Keyence

16,115.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M020 Keyence

13,905.00 kr

Only 7 units left

Specifications

Model		SJ-M020
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec. max.^*1
Ion balance		±15 V^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +80°C 32 to +176°F^4^5
	Relative humidity	35 to 65%RH (no condensation)^*3
Weight		Approx. 600 g
^1 Operating distance: 50 mm 1.97", Air volume: 60 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^2 Operating distance: 50 mm 1.97", Air volume: 20 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^3 For derating of humidity and pressure during use at an ambient temperature higher than 35°C 95°F, contact KEYENCE. For air supply, use clean dry air with -20°C -4°F or lower dew point. The minimum air volume varies depending on the nozzle type. Contact KEYENCE for more information. ^4 The supplied air temperature should be 40°C 104°F or less. ^*5 For high-pressure cable only. For other parts, operating ambient temperature is 0 to +40°C 32 to +104°F.

Keyence SJ-M020G Keyence

12,430.00 kr

Only 9 units left

Specifications

Model		SJ-M020G
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec. max.^*1
Ion balance		±15 V^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +80°C 32 to +176°F^4^5
	Relative humidity	35 to 65%RH (no condensation)^*3
Weight		Approx. 600 g
^1 Operating distance: 50 mm 1.97", Air volume: 60 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^2 Operating distance: 50 mm 1.97", Air volume: 20 NL/min, (Ambient temperature: 20 to 30°C 68 to 86°F, Ambient humidity: 40 to 60%RH) ^3 For derating of humidity and pressure during use at an ambient temperature higher than 35°C 95°F, contact KEYENCE. For air supply, use clean dry air with -20°C -4°F or lower dew point. The minimum air volume varies depending on the nozzle type. Contact KEYENCE for more information. ^4 The supplied air temperature should be 40°C 104°F or less. ^*5 For high-pressure cable only. For other parts, operating ambient temperature is 0 to +40°C 32 to +104°F.

Keyence SJ-M021 Keyence

33,849.00 kr

Only 6 units left

Specifications

Model		SJ-M021
Type		Static Elimination Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V or less^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Min. air pressure	With SJ-ML	0.02 MPa (20 Nl/min)
	With SJ-MS/ML1	0.03 MPa (20 Nl/min)
	With SJ-MS/ML2	0.02 MPa (20 Nl/min)
	With SJ-MS/ML3	0.08 MPa (50 Nl/min)
	With SJ-MS/ML4
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C 32 to 176 °F^4^5
	Relative humidity	35 to 65 % RH
Weight		Approx. 600 g
^1 At installation distance 50 mm 1.97", air flow 60 Nl/min (ambient temperature 20 to 30 °C 68 to 86 °F, relative humidity 40 to 60 %) ^2 Values obtained at an installation distance of 50 mm 1.97" and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C +68 to +86 °F, ambient operating humidity 40 to 60 % RH] (without nozzle) ^3 Inquire for derating of humidity/pressure in environments exceeding +35 °C 95 °F. Use clean or dry air at a temperature of -20 °C -4 °F or less. Min. air pressure varies by nozzle used. ^4 Use a supplied fluid with a temperature of 40 °C 104 °F or less. ^*5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C 104 °F.

Keyence SJ-M021G Keyence

24,867.00 kr

Only 5 units left

Specifications

Model		SJ-M021G
Type		Static Elimination Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V or less^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Min. air pressure	With SJ-ML	0.02 MPa (20 Nl/min)
	With SJ-MS/ML1	0.03 MPa (20 Nl/min)
	With SJ-MS/ML2	0.02 MPa (20 Nl/min)
	With SJ-MS/ML3	0.08 MPa (50 Nl/min)
	With SJ-MS/ML4
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C 32 to 176 °F^4^5
	Relative humidity	35 to 65 % RH
Weight		Approx. 600 g
^1 At installation distance 50 mm 1.97", air flow 60 Nl/min (ambient temperature 20 to 30 °C 68 to 86 °F, relative humidity 40 to 60 %) ^2 Values obtained at an installation distance of 50 mm 1.97" and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C +68 to +86 °F, ambient operating humidity 40 to 60 % RH] (without nozzle) ^3 Inquire for derating of humidity/pressure in environments exceeding +35 °C 95 °F. Use clean or dry air at a temperature of -20 °C -4 °F or less. Min. air pressure varies by nozzle used. ^4 Use a supplied fluid with a temperature of 40 °C 104 °F or less. ^*5 Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C 104 °F.

Keyence SJ-M030 Keyence

8,370.00 kr

Only 9 units left

Specifications

Model		SJ-M030
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa or less
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Effective length		164 mm 6.457"
Total length		220 mm 8.661"
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 600 g
^*1 Please make an inquiry as to the measurement condition.

Keyence SJ-M030C Keyence

32,220.00 kr

Only 2 units left

Specifications

Model		SJ-M030C
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa max.
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Effective length		164 mm 6.46"^*2
Total length		220 mm 8.66"^*3
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)
Weight		Approx. 600 g
^1 Measured under the following conditions: [SJ-M030G/M070G] Air purge: 3 NL/min per electrode Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) [SJ-M030C/M070C] Air purge: None Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) ^2 Effective length indicates static elimination range at 50 mm 1.97" operating distance. ^*3 Overall length includes mounting brackets.

Keyence SJ-M030G Keyence

22,342.00 kr

Only 4 units left

Specifications

Model		SJ-M030G
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa max.
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open-collector, 100 mA max. (40 V max.)
	Ion level alarm output
	Condition alarm output
Effective length		164 mm 6.46"^*2
Total length		220 mm 8.66"^*3
Rating	Power voltage	24 VDC ±10%
	Current consumption	450 mA max.
Environmental resistance	Ambient temperature	0 to +40°C 32 to +104°F
	Relative humidity	35 to 65%RH (no condensation)
Weight		Approx. 600 g
^1 Measured under the following conditions: [SJ-M030G/M070G] Air purge: 3 NL/min per electrode Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) [SJ-M030C/M070C] Air purge: None Down flow: 0.3 m/s 0.98 ft/s Operating distance: 50 mm 1.97"(50 Hz), 600 mm 23.62" (8 Hz), 1500 mm 59.06"(1 Hz) ^2 Effective length indicates static elimination range at 50 mm 1.97" operating distance. ^*3 Overall length includes mounting brackets.

Keyence SJ-M031C Keyence

0.00 kr

Sold Out

Specifications

Model		SJ-M031C
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Air purge supplied pressure		0.2 MPa or less
Effective length		164 mm 6.457"^*2
Total length		220 mm 8.66"^*3
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 600 g
^1 Operating distance: 50 mm 1.96" (50 Hz), 600 mm 23.62" (8 Hz), 1,500 mm 59.05" (1 Hz). Downward air flow: 0.3 m/s. Air purge: None ^2 Elective length indicates the static elimination rangeat 50 mm 1.97" operating distance. ^*3 The overall length includes mounting brackets.

Keyence SJ-M031G Keyence

28,039.00 kr

Only 2 units left

Specifications

Model		SJ-M031G
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Air purge supplied pressure		0.2 MPa or less
Effective length		164 mm 6.457"^*2
Total length		220 mm 8.66"^*3
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 600 g
^1 Operating distance: 50 mm 1.96" (50 Hz), 600 mm 23.62" (8 Hz), 1,500 mm 59.05" (1 Hz). Downward air flow: 0.3 m/s. Air purge (3 NL/min) /1electrode ^2 Elective length indicates the static elimination rangeat 50 mm 1.97" operating distance. ^*3 The overall length includes mounting brackets.

Keyence SJ-M040 Keyence

7,578.00 kr

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-M070 Keyence

30,704.00 kr

Only 8 units left

Specifications

Model		SJ-M070
Type		Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Ion balance		±30 V^*1
Supply pressure range		0.2 MPa or less
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN open collector 100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Effective length		324 mm12.756"
Total length		380 mm14.961"
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 65 % RH (No condensation)
Weight		Approx. 720 g
^*1 Please make an inquiry as to the measurement condition.