1 year warranty
module XPSAXE - stop and switch monitoring - 24 V DC
This XPSAXE safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Preventa Safety automation |
| Product or Component Type | Preventa safety module |
| Safety module name | XPSAXE |
| Safety module application | For emergency stop and switch monitoring |
| Safety level | Can reach PL e/category 4 EN/ISO 13849-1 Can reach SILCL 3 EN/IEC 62061 |
| Safety reliability data | DC > 99 % EN/ISO 13849-1 MTTFd = 457 years EN/ISO 13849-1 PFHd = 3E-8 1/h EN/IEC 62061 |
| Connections - terminals | Captive screw clamp terminals, removable terminal block, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel Captive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² solid without cable end Captive screw clamp terminals, removable terminal block, 1 x 0.2...1 x 2.5 mm² flexible without cable end Captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel Captive screw clamp terminals, removable terminal block, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel Captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1 mm² solid without cable end Captive screw clamp terminals, removable terminal block, 2 x 0.2...2 x 1 mm² flexible without cable end Captive screw clamp terminals, removable terminal block, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel |
| Output type | Relay instantaneous opening, 3 NO, volt-free |
| Number of additional circuits | 1 NC |
| [Us] Rated Supply Voltage | 24 V DC - 15...10 % 24 V AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Synchronisation time between inputs | < 0.5 s |
| Supply frequency | 50/60 Hz |
| Maximum power consumption in VA | 4 VA DC |
| [Uc] control circuit voltage | 24 V DC |
| Breaking capacity | 3600 VA inrush AC-15 B300 relay output 360 VA holding AC-15 B300 relay output |
| Breaking capacity | 1.5 A 24 V DC-13)50 ms relay output |
| Output thermal current | 6 A instantaneous and time delay outputs |
| Associated fuse rating | 6 A gG instantaneous outputs |
| Minimum output current | 10 mA relay output |
| Minimum output voltage | 17 V relay output |
| Maximum response time on input open | 80 ms |
| [Ui] rated insulation voltage | 300 V 2)IEC 60947-5-1 300 V 2)DIN VDE 0110 part 1 |
| [Uimp] rated impulse withstand voltage | 4 kV III IEC 60947-5-1 4 kV III DIN VDE 0110 part 1 |
| Local signalling | 2 LEDs |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.505 lb(US) (0.229 kg) |
This safety relay is designed for monitoring Emergency stop and Guard switch. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This basic safety modules embeds pre-defined safety functions. This safety relay embeds 1 control output, 4 NO safety outputs, and 2 NC diagnostic outputs. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO13849-1, SILCL 3 conforming to IEC62061, SIL 3 conforming to IEC61508. This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC 60947-5-1, IEC 61508-1, IEC 61508-2/-3, ISO 13849-1, IEC 62061 functional safety standards, is certified by cULus, TÃV. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Basic offers the most optimised solution for applications with hardwired safety modules.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Harmony Safety Automation |
| Product or Component Type | Safety module |
| Safety module name | XPSBAC |
| Safety module application | For emergency stop and protective guard applications |
| Function of module | Emergency stop button with 2 NC contacts Guard monitoring with 1 or 2 limit switches |
| Safety level | Can reach PL e/category 4 for normally open relay contact ISO 13849-1 Can reach SILCL 3 for normally open relay contact IEC 62061 Can reach SIL 3 for normally open relay contact IEC 61508 Can reach PL c/category 1 for normally closed relay contact ISO 13849-1 Can reach SILCL 1 for normally closed relay contact IEC 62061 Can reach SIL 1 for normally closed relay contact IEC 61508 |
| Safety reliability data | MTTFd > 30 years for normally open relay contact ISO 13849-1 Dcavg >= 99 % for normally open relay contact ISO 13849-1 PFHd = 0.95E-09 for normally open relay contact ISO 13849-1 HFT = 1 for normally open relay contact IEC 62061 PFHd = 0.95E-09 for normally open relay contact IEC 62061 SFF > 99% for normally open relay contact IEC 62061 HFT = 1 for normally open relay contact IEC 61508-1 PFHd = 0.95E-09 for normally open relay contact IEC 61508-1 SFF > 99% for normally open relay contact IEC 61508-1 Type = B for normally open relay contact IEC 61508-1 MTTFd > 30 years for normally closed relay contact ISO 13849-1 DC > 60 % for normally closed relay contact ISO 13849-1 PFHd = 0.95E-09 for normally closed relay contact ISO 13849-1 HFT=0 for normally closed relay contact IEC 62061 PFHd = 0.95E-09 for normally closed relay contact IEC 62061 SFF > 60% for normally closed relay contact IEC 62061 HFT=0 for normally closed relay contact IEC 61508-1 PFHd = 0.95E-09 for normally closed relay contact IEC 61508-1 SFF > 60% for normally closed relay contact IEC 61508-1 Type = B for normally closed relay contact IEC 61508-1 |
| Electrical circuit type | NC pair |
| Connections - terminals | Removable screw terminal block, 0.2...2.5 mm² solid or flexible Removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor Removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductor Removable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel |
| [Us] Rated Supply Voltage | 24 V AC - 15...10 % 24 V DC - 20...20 % |
Complementary
| Characteristic | Value(s) |
|---|---|
| Synchronisation time between inputs | Unlimited |
| Type of start | Automatic/manual/monitored |
| Power consumption in W | 1.5 W 24 V DC |
| Power consumption in VA | 3.5 VA 24 V AC 50/60 Hz |
| Input protection type | Internal, electronic |
| safety outputs | 4 NO + 1 NC |
| safety inputs | 0 |
| Input compatibility | Normally closed circuit ISO 14119 XC limit switch ISO 14119 Mechanical contact ISO 14119 Normally closed circuit ISO 13850 |
| input terminal | Power supply |
| [Ie] rated operational current | 5 A AC-1 for normally open relay contact 3 A AC-15 for normally open relay contact 5 A DC-1 for normally open relay contact 3 A DC-13 for normally open relay contact 3 A AC-1 for normally closed relay contact 1 A AC-15 for normally closed relay contact 3 A DC-1 for normally closed relay contact 1 A DC-13 for normally closed relay contact |
| control outputs | 0 |
| [Ith] conventional free air thermal current | 6 A |
| Associated fuse rating | 10 A gG NO relay output circuit IEC 60947-1 |
| Minimum output current | 10 mA relay output |
| Minimum output voltage | 5 V relay output |
| Response time | 150 ms at 24 V AC 80 ms at 24 V DC |
| [Ui] rated insulation voltage | 300 V 2)IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 4 kV II IEC 60947-1 |
| Local signalling | LED green power power ON LED red error error LED yellow state status LED yellow start1 start input LED yellow start2 start input |
| Mounting Support | 35 mm symmetrical DIN rail |
| Depth | 4.7 in (120 mm) |
| Height | 3.9 in (100 mm) |
| Width | 0.9 in (22.5 mm) |
| Product Weight | 0.441 lb(US) (0.200 kg) |
module XPSBAE - two-hand control III A - 115-230 V AC
module XPSBAE - two-hand control III A - 115-230 V AC
module XPSBAE - two-hand control III A - 24 V AC DC
This XPSBAE safety module is for electrical monitoring of two-hand control stations. It meets the requirements of Performance Level PL c/Category 1 conforming to standard EN/ISO 13849-1 and SILCL1 conforming to EN/IEC 62061. It can be used for two-hand control stations, designed to protect operators from sustaining hands injury. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Preventa Safety automation |
| Product or Component Type | Preventa safety module |
| Safety module name | XPSBAE |
| Safety module application | For electrical monitoring of two-hand control stations |
| Function of module | Monitoring two-hand control station type IIIA |
| Safety level | Can reach PL c/category 1 EN/ISO 13849-1 Can reach SILCL 1 EN/IEC 62061 |
| Safety reliability data | MTTFd = 55 years EN/ISO 13849-1 PFHd = 2.1E-6 1/h EN/IEC 62061 |
| Connections - terminals | Captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel Captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel Captive screw clamp terminals, 1 x 0.2...1 x 2.5 mm² stranded without cable end Captive screw clamp terminals, 1 x 0.2...1 x 2.5 mm² solid without cable end Captive screw clamp terminals, 2 x 0.2...2 x 1.5 mm² stranded without cable end Captive screw clamp terminals, 2 x 0.2...2 x 1 mm² solid without cable end |
| Output type | Relay, 1 NO, volt-free |
| Number of additional circuits | 1 NC |
| [Us] Rated Supply Voltage | 24 V AC/DC - 15...10 % |
Complementary
| Characteristic | Value(s) |
|---|---|
| Synchronisation time between inputs | 0.5 s |
| Supply frequency | 50/60 Hz |
| Power Consumption in W | 0.8 W |
| Power Consumption in VA | 2.4 VA |
| Input protection type | Internal, electronic |
| Number of Inputs | 1 NC + NO |
| Input current | 2.5 mA NC 25 mA NO |
| Input compatibility | Two-hand control EN 574 |
| [Uc] control circuit voltage | 24 V DC |
| Breaking capacity | 180 VA holding AC-15 C300 relay output 1800 VA inrush |
| Breaking capacity | 2 A 24 V DC-13)20 ms relay output |
| [Ith] conventional free air thermal current | 5 A |
| Associated fuse rating | 4 A gG relay output EN/IEC 60947-5-1 6 A fast blow |
| Minimum output current | 10 mA relay output |
| Minimum output voltage | 17 V relay output |
| Maximum response time on input open | 20 ms |
| [Ui] rated insulation voltage | 300 V 2)IEC 60947-5-1 |
| [Uimp] rated impulse withstand voltage | 4 kV III IEC 60947-5-1 4 kV III DIN VDE 0110 part 1 |
| Local signalling | 2 LEDs |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.2 lb(US) (0.1 kg) |
This XPSBF safety module is for electrical monitoring of two-hand control stations. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for two-hand control stations, designed to protect operators from sustaining hands injury. It has additional solid-state output for communication with PLCs about safety status of your process.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Preventa Safety automation |
| Product or Component Type | Preventa safety module |
| Safety module name | XPSBF |
| Safety module application | For electrical monitoring of two-hand control stations |
| Function of module | Monitoring two-hand control station and a foot switch |
| Safety level | Can reach PL e/category 4 EN/ISO 13849-1 Can reach SILCL 3 EN/IEC 62061 |
| Safety reliability data | DC > 99 % EN/ISO 13849-1 MTTFd = 50.1 years EN/ISO 13849-1 PFHd = 1.3E-8 1/h EN/IEC 62061 |
| Connections - terminals | Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible without cable end Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid without cable end Captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel Captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible without cable end Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid without cable end Captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel Captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel |
| Output type | Relay, 2 NO, volt-free |
| Number of additional circuits | 2 solid state outputs |
| [Us] Rated Supply Voltage | 24 V DC - 20...20 % |
Complementary
| Characteristic | Value(s) |
|---|---|
| Synchronisation time between inputs | 0.5 s |
| Power Consumption in W | 2.5 W |
| Input protection type | Internal, electronic |
| Number of Inputs | 1 NC + NO |
| Input compatibility | Two-hand control EN 574/ISO 13851-III C |
| [Uc] control circuit voltage | 24 V DC |
| Breaking capacity | 180 VA holding AC-15 C300 relay output 1800 VA inrush AC-15 C300 relay output |
| Breaking capacity | 20 mA 24 V solid state output circuit 1.5 A 24 V DC-13)50 ms relay output |
| Output thermal current | 4.2 A per relay relay output |
| [Ith] conventional free air thermal current | 8.4 A |
| Associated fuse rating | 4 A gG relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fast blow relay output EN/IEC 60947-5-1, DIN VDE 0660 part 200 |
| Minimum output current | 10 mA relay output |
| Minimum output voltage | 17 V relay output |
| Maximum response time on input open | 20 ms |
| [Ui] rated insulation voltage | 300 V 2)IEC 60947-5-1 300 V 2)DIN VDE 0110 part 1 |
| [Uimp] rated impulse withstand voltage | 4 kV III IEC 60947-5-1 4 kV III DIN VDE 0110 part 1 |
| Local signalling | 3 LEDs |
| Current consumption | 8 mA 24 V DC on power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Product Weight | 0.33 lb(US) (0.15 kg) |
module XPSDM - 2 coded magnetic switch - 24 V DC
module XPSDM - 2 coded magnetic switch - 24 V DC