1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon X80 |
| Accessory / Separate Part Type | Preformed cordset |
| Product Compatibility | BMXAMO0802 ABE7CPA02 |
| Electrical connection | 1 connector SUB-D 25 sub-base side 1 removable terminal block, 20 ways module side |
| Cable length | 4.9 ft (1.5 m) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product Weight | 0.71 lb(US) (0.32 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Relay discrete output module |
| Discrete output number | 8 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Contacts type and composition | 1 NO/NC |
| Contact form | Form C |
| Discrete output voltage | 20...250 V AC 30...150 V DC 5...30 V DC |
| Addressing requirement | 0.5 output word |
| Maximum load current | 100 mA 30...50 V DC L/R = 10 ms 2 A 250/30 V AC/DC tungsten 1/4 hp cos phi = 0.4 3 A 250/30 V AC/DC 300 mA 30...50 V DC resistive 5 A 250/30 V AC/DC resistive 140 °F (60 °C) |
| Surge current | 20 A 10 ms capacitive |
| Switching frequency | 30 Hz resistive F = 0.5/I²L inductive |
| Switching capacity in VA | 1250 VA resistive |
| Maximum response time on input open | 10 ms at state 0 to state 1 20 ms at state 1 to state 0 |
| Mechanical durability | 10000000 cycles |
| Electrical durability | 100000 cycles 100 mA 30...150 V DC L/R = 10 ms 100000 cycles 30...150 V DC interposing relay 100000 cycles 300 mA 30...150 V DC resistive 100000 cycles 5 A 30 V DC resistive 200000 cycles 5 A 250 V AC resistive 50000 cycles 500 mA 30...150 V DC resistive |
| Output overvoltage protection | Internal by varistor, 275 V |
| Isolation between channels | 1780 Vrms AC for 1 minute 2500 V DC |
| Isolation between channels and bus | 1780 Vrms AC for 1 minute 2500 V DC for 1 minute |
| Power dissipation | 2.75 W + (0.5 x the number of points on) |
| Marking | CE |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 8 LEDs (green) for input status |
| Bus current requirement | 560 mA |
| Module format | Standard |
| Product Weight | 0.7 lb(US) (0.3 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Analogue output module |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue output number | 8 |
| Addressing requirement | 8 output words |
| Loop voltage | 6â¦30 V DC |
| Maximum voltage drop | <30 V 25 mA |
| Analogue output range | 0...20 mA 0...20000 counts 0...25 mA 0...25000 counts 4...20 mA 0...16000 counts 4...20 mA 0...4095 counts |
| Absolute accuracy error | +/- 0.2 % of full scale 77 °F (25 °C) |
| Linearity | +/- 12 µA 4...20 mA 0...4095 counts +/- 4 µA 0...20 mA 0...20000 counts +/- 4 µA 0...25 mA 0...25000 counts +/- 4 µA 4...20 mA 0...16000 counts |
| Accuracy drift according to temperature | 0.004 % of full scale/°C typical 0.007 % of full scale/°C maximum |
| Isolation between channels and bus | 1780 V for 1 minute AC |
| Update time | 5 ms |
| Setting time | 3.2 ms to +/-0.1% of the final value 1.6 ms to 5% of the final value |
| Fault type | Open circuit 4...20 mA |
| Bus current requirement | 550 mA |
| Maximum power dissipation in W | 5 W |
| External power requirement | 6...30 V |
| Marking | CE |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault 8 LEDs (green) for channel is turned on 8 LEDs (red) for channel fault |
| Module format | Standard |
| Product Weight | 0.7 lb(US) (0.3 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Low voltage dc discrete input modules |
| Discrete input number | 32 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Group of channels | 4 |
| Logic input | Negative (source) |
| Discrete input voltage | 24 V DC |
| Input voltage limits | 19.2...30 V |
| Voltage state 1 guaranteed | -30...-15 V DC |
| Voltage state 0 guaranteed | -5...0 V DC |
| Current state 1 guaranteed | >= 2.5 mA at Us = - 14 V |
| Current state 0 guaranteed | <= 0.5 mA |
| Addressing requirement | 2 input words |
| Input impedance | 2400 Ohm |
| Maximum leakage current | 200 mA at Us = 5.5 V and Uin = 4 V |
| Absolute maximum input | 30 V continuous 50 V during 1 ms decaying pulse |
| Response Time | <= 1 ms from state 0 to state 1 <= 1 ms from state 1 to state 0 |
| Protection Type | Input protection by resistor limited |
| Power dissipation | 1.5 W + (0.26 x number of points on) |
| Isolation between group and bus | 1780 Vrms for 1 minute |
| Isolation between group | 500 Vrms for 1 minute |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault detected (F) 32 LEDs (green) for input status |
| Marking | CE |
| Bus current requirement | 330 mA |
| Module format | Standard |
| Product Weight | 0.7 lb(US) (0.3 kg) |
CS1 Series Micro Programmable Logic Controller CPU Module for Basic Systems, USB+RS-232C, 20K steps, 64K words, 960 bits (up to 2 expansion racks), 5/DC 0.78A
PLC, 100-240 VAC supply, 24 x 24 VDC inputs, 16 x relay outputs 2 A, 4 x analog inputs, 2 x analog outputs, 20K steps program + 32K words data memory
PLC, 24 VDC supply, 24 x 24 VDC inputs, 16 x NPN outputs 0.3 A, 8K steps program + 8K words data memory, RS-232C and RS-485 (half-duplex) port
Analog output unit, 2 x outputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -10 to 10 V, 4 to 20 mA, externally powered 24 VDC 140mA, screw terminal
Digital output unit, 16 x relay outputs, 250 VAC/24 VDC, 2 A max, screw terminal
CS1 Series Programmable Controller Output Module, 12 to 24 VDC, 0.3 A, (64) NPN Output, Sinking, Output Module for Programmable Controller
CJ-series Motion Control Unit with MECHATROLINK-II interface
CS1 Series Micro Programmable Logic Controller CPU Module for Basic Systems, USB+RS-232C, 120K steps, 256K words, 1,280 bits (up to 3 expansion racks), 5/DC 0.82A
PLC, 24 VDC supply, 36 x 24 VDC inputs, 24 x relay outputs 2 A, 10K steps program + 32K words data memory
FX3U Logic Module - 16 Inputs, 16 Outputs, Relay, Computer, HMI Interface
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Fx1n Series Programmable Controllers, PLC CPU - 24 (Digital) Inputs, 16 (Relay) Outputs, Computer Interface
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Plc Q Series 12 Slots, Base Unit Power Supply + Cpu + 12 I/O Slots
Power Supply, Nominal Rated Voltage: 120/240 VAC or 125 VDC, Input Voltage Range: 85 to 264 VAC or 100 to 300 VDC, Input Power: 70 W with VDC, Load Capacity: 40 Watts
ModbusTCP/UDP Bus Coupler
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Programmable logic controllers are ruggedized industrial computers that execute control logic for machine and process automation, handling digital and analog I/O, motion coordination, and network communication in real time across manufacturing and infrastructure environments. PLC Direct supplies programmable logic controllers as an independent supplier, carrying surplus sealed, refurbished, and used hardware for maintenance and replacement in installed automation systems.
Where Are Programmable Logic Controllers Used in Industrial Environments?
Programmable logic controllers are used wherever automated machine or process control requires deterministic, scan-based logic execution across digital and analog field signals. These controllers are installed across virtually every sector of industrial operations, from individual machine control panels to plant-wide distributed automation architectures.
Facilities and operations that depend on programmable logic controllers include:
-
Discrete manufacturing plants running assembly line automation, machine sequencing, and multi-axis motion control.
-
Food and beverage processing facilities managing conveyor systems, batch recipes, and filling line control.
-
Water and wastewater treatment plants controlling pump stations, dosing systems, and distributed process equipment.
-
Automotive and metal fabrication operations requiring high-speed discrete I/O and coordinated production line control.
-
Packaging, material handling, and logistics operations where flexible, modular control architectures support high-mix production environments.
Maintenance engineers and procurement teams sourcing replacement programmable logic controllers depend on the availability of both current-generation and legacy hardware to keep installed systems running without redesigning existing control architectures.
Which Brands of Programmable Logic Controllers Does PLC Direct Stock?
PLC Direct stocks programmable logic controllers across the major control platform brands deployed in installed automation systems worldwide.
-
Siemens SIMATIC S7 series: S7-300 and S7-400 modular controllers confirmed in stock, covering mid-range and high-end machine and process control applications across manufacturing and process industries.
-
Schneider Electric Modicon M340 and M580: Mid-range and high-end PAC platforms for machine and process control, with Modicon Quantum 140CPU series also stocked for larger installed process automation environments.
-
Mitsubishi Electric MELSEC iQ-R, Q Series, and FX5: Controller hardware spanning high-performance iQ-R CPUs, modular Q Series processors, and compact FX5 units for machine control applications across discrete manufacturing.
-
Omron Sysmac NX Series: NX1P2 CPU modules and associated I/O for Omron's machine automation platform, suited to packaging, assembly, and process control installations using EtherCAT and EtherNet/IP communication.
PLC Direct carries programmable logic controllers as surplus sealed, refurbished, and used hardware, giving maintenance teams and procurement managers options across condition grades and budget requirements.
What Should You Know Before Ordering Programmable Logic Controllers?
Hardware condition options: PLC Direct supplies programmable logic controllers in surplus sealed, refurbished, and used condition. Surplus sealed units are factory-sealed stock that has not been previously installed; refurbished controllers have been inspected and tested to confirm operational functionality; used hardware is sourced from decommissioned systems and suits facilities managing lifecycle replacements under budget constraints.
Compatibility and part identification: Programmable logic controllers are platform-specific, and CPU modules, I/O expansion, power supplies, and communication modules must be matched to the correct rack, backplane, and firmware environment for the installed system. Confirm the CPU part number, series designation, and any firmware or version requirements from existing system documentation before ordering. For legacy platforms such as the SIMATIC S7-300 and S7-400 or Modicon Quantum, verify rack slot and power supply compatibility as part of the identification process.
Warranty: All programmable logic controller hardware purchased from PLC Direct carries a standard 1-year PLC Direct warranty covering defects and functionality, applicable to surplus sealed, refurbished, and used products.
PLC Direct supplies programmable logic controller hardware for replacement and maintenance purposes and does not provide system design, programming, or integration services.