Measurement Sensors

Showing 673 - 696 of 719 products

26,061.00 kr

Only 1 unit left

Specifications

Model		LS-HA100
Type		Head expansion unit
No. of connectable sensor heads		2
Head compatibility		Yes
Display	LED display	POWER ON indicator, head status indicator
Output terminal	Analog voltage output	±10 V x 2 outputs, Output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, Compatible load max. 350 Ω
Power source		Supplied from the controller
Environmental resistance	Ambient temperature	0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 600 g

Keyence CB-PN100 Keyence

51,284.00 kr

Only 4 units left

Specifications

Model		CB-PN100
Type		PROFINET unit
Compatible network		PROFINET IO communication
Ethernet	Compliant standards	IEEE 802.3u^*1
	Transmission speed	100 Mbps, full duplex (100BASE-TX)
	Transmission media	STP or Category 5e or higher UTP
	Maximum cable length	100 m 328.1'
PROFINET IO	Supported functions	Data I/O communication, Record data communication
	Number of connectable PROFINET IO controllers	1
	Update Time	2 ms to 2,048 ms
	GSDML	Version 2.25
	Conformance class	Conformance Class A compliant
	Conformance test version	Based on Version 2.2.4
	Applicable protocol	LLDP, DCP
Rating	Power voltage	24 V ±10 % (supplied from the controller unit of the laser scanner)
	Current consumption	0.12 A or less
Weight		Approx. 470 g
^*1 Although this unit conforms to IEEE 802.3u and can establish 100 Mbps full duplex communication using AutoNegotiation function, it does not have AutoCrossOver and AutoPolarity functions that are normally required for the PROFINET IO standard. Select a straight or cross cable according to the Ethernet port of the device to be connected.

Keyence CB-EP100 Keyence

4,180.00 kr

Only 8 units left

Specifications

Model		CB-EP100
Type		EtherNet/IP™ unit
Compatible network		EtherNet/IP™ and displacement sensor-specific protocols (socket communication)
Ethernet	Compliant standards	IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX)
	Transmission speed	10 Mbps (10BASE-T), 100 Mbps (100BASE-TX)
	Transmission media	STP or Category 3 or higher UTP (10BASE-T), STP or Category 5 or higher UTP (100BASE-TX)
	Maximum cable length	100 m 328.1' (Distance between the unit and Ethernet switch)
EtherNet	Maximum number of connectable hubs	4 hubs (10BASE-T), 2 hubs (100BASE-TX)^*1
EtherNet/IP™	Supported functions	Cyclic communication (Implicit messaging), Message communication (Explicit messaging), Compatible with UCMM and Class 3
	Number of connections	64
	RPI	0.5 ms to 10,000 ms (in 0.5 ms)
	Tolerable communication bandwidth for cyclic communication	6,000 pps
	Message communication	UCMM, Class 3
	Conformance test	Compatible with Version A9
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P) (supplied from the controller unit of the laser scanner)
	Current consumption	0.12 A or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 470 g
^*1 The number of connectable hubs is not limited when using a switching hub.

Keyence CB-BR01 Keyence

0.00 kr

Sold Out

Specifications

Model		CB-BR01
Type		Extension connection unit
Cable min. bending R		22 mm 0.87"
Power source		Supplied from the controller
Environmental resistance	Enclosure rating	None
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 150 g (including cable)

Keyence CB-BD100 Keyence

0.00 kr

Sold Out

Specifications

Model		CB-BD100^*1
Type		BCD output unit
Display	LED display	POWER-ON LED
Output terminal	BCD output	NPN open-collector output x 4 ports^*2
	Strobe output	NPN open-collector output x 4 outputs
	OUT selection output
Input terminal		Non-voltage input x 4 inputs
Power source		Supplied from the controller
Rating	Current consumption	0.16 A or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		800 g
^1 Up to 1 unit can be connected to the controller. NPN open-collector output rating: 30 mA max. (30 V max.), residual voltage of 0.5 V max. Non-voltage input rating: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Selectable from BCD output (29 bits, signed), binary output (25 bits, negative numbers are represented by the two's complement), and judgment output.

Keyence LS-D1000 Keyence

34,108.00 kr

Only 1 unit left

Specifications

Model		LS-D1000
Type		Display and settings panel
Display interface	Measured value display	Measured value display: 2 colors, 8 digits, 16 segments OUT number display: Monochrome, 2 digits, 7 segments Tolerance judgment display: HH, HI, GO, LO, LL. Monochrome Control status display: TIM, ZERO indicator. Monochrome
	Program number display	Monochrome, 2 digits, 7 segments
	Position monitor display	1D display: 2 colors, 32 levels 2D display: Monochrome, 7 x 7 matrix display
	Display update cycle	5 times/sec.
Operation input interface		Numeric keypad, function key, lock key timing input key, zero input key, reset input key, escape key, arrow keys (4)
Display and settings panel connection port		2
Power source		Supplied from the controller
Rating	Current consumption	0.19 A or less
Environmental resistance	Enclosure rating	IP65 (When panel attached, front surface only)
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 400 g

Keyence LS-9120M Keyence

51,668.00 kr

Only 1 unit left

Specifications

Model		LS-9120M
Type		Head: Large-diameter model
Measurement range		0.8 mm to 120 mm 0.03" to 4.72"
Smallest detectable object		0.8 mm 0.03"
Transmitter/receiver distance		400 ±100 mm 15.75" ±3.94"
Repeatability		±0.3 µm 0.000012"^*1
Measurement accuracy		±8 µm 0.000315"^*2
Sampling cycle		16,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 1,800 g, Receiver: Approx. 2,800 g, Base: Approx. 1,600 g
^1 A ±2σ margin of error when measuring a ø40 mm ø1.57" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^2 Margin of error when a moving ø40 mm ø1.57" rod is measured in the 40 mm x 120 mm 1.57" x 4.72" measurement area using outer diameter mode.

Keyence LS-9030M Keyence

34,108.00 kr

Only 2 units left

Specifications

Model		LS-9030M^*1
Type		Head: Standard model
Measurement range		0.3 mm (0.08 mm) to 30 mm 0.01" (0.003") to 1.18"
Smallest detectable object		0.3 mm (0.08 mm) 0.01" (0.003")
Transmitter/receiver distance		160 ±40 mm 6.3" ±1.57"
Repeatability		±0.1 µm 0.000004"^*2
Measurement accuracy		±2 µm 0.000079"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	20 x 24 mm 0.79" x 0.94"
	Smallest detectable object	0.3 mm 0.01"
	Repeatability	±0.2 mm 0.01"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 440 g Receiver: Approx. 500 g Base: Approx. 430 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø10 mm ø0.39" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø10 mm ø0.39" rod is measured in the 10 mm x 20 mm 0.39" x 0.79" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø10 mm ø0.39" rod in the center of the measurement area with the average measurement number set as 512 times.

Keyence LS-9030D Keyence

0.00 kr

Sold Out

Specifications

Model		LS-9030D
Type		Head: 2-axis standard model
Measurement range		ø0.3 mm to ø30 mm ø0.01" to ø1.18"
Smallest detectable object		0.3 mm 0.01"
Repeatability		±0.1 µm 0.000004"^*1
Measurement accuracy		±2 µm 0.000079"^*2
Sampling cycle		16,000 samples/sec.^*3
Light source		InGaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP67 (including connector part)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Approx. 9 kg
^1 A ±2σ margin of error when measuring a ø10 mm ø0.39" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^2 Margin of error when a moving ø10 mm ø0.39" rod is measured in the 10 mm x 10 mm 0.39" x 0.39" measurement area. ^*3 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.

Keyence LS-9030 Keyence

58,415.00 kr

Only 3 units left

Specifications

Model		LS-9030^*1
Type		Head: Standard model
Measurement range		0.3 mm (0.08 mm) to 30 mm 0.01" (0.003") to 1.18"
Smallest detectable object		0.3 mm (0.08 mm) 0.01" (0.003")
Transmitter/receiver distance		160 ±40 mm 6.3" ±1.57"
Repeatability		±0.1 µm 0.000004"^*2
Measurement accuracy		±2 µm 0.000079"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	20 x 24 mm 0.79" x 0.94"
	Smallest detectable object	0.3 mm 0.01"
	Repeatability	±0.2 mm 0.01"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 440 g Receiver: Approx. 440 g Base: Approx. 430 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø10 mm ø0.39" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø10 mm ø0.39" rod is measured in the 10 mm x 20 mm 0.39" x 0.79" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø10 mm ø0.39" rod in the center of the measurement area with the average measurement number set as 512 times.

Keyence LS-9006M Keyence

0.00 kr

Sold Out

Specifications

Model		LS-9006M^*1
Type		Head: Small-diameter model
Measurement range		0.04 mm (0.01 mm) to 6 mm 0.001" (0.0004") to 0.24"
Smallest detectable object		0.04 mm (0.01 mm) 0.001" (0.0004")
Transmitter/receiver distance		60 ±5 mm 2.36" ±0.2"
Repeatability		±0.03 µm^*2
Measurement accuracy		±0.5 µm 0.000020"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	4 x 5 mm 0.16" x 0.2"
	Smallest detectable object	0.04 mm 0.001"
	Repeatability	±0.02 mm 0.0008"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 130 g Receiver: Approx. 300 g Base: Approx. 180 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø1.0 mm ø0.04" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø1.0 mm ø0.04" rod is measured in the 2 mm x 4 mm 0.08" x 0.16" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø1.0 mm ø0.04" rod in the center of the measurement area with the average measurement number set as 512 times.

Keyence LS-9006D Keyence

0.00 kr

Sold Out

Specifications

Model		LS-9006D
Type		Head: 2-axis small-diameter model
Measurement range		ø0.04 mm to ø6 mm ø0.001" to ø0.24"
Smallest detectable object		0.04 mm 0.001"
Repeatability		±0.03 µm^*1
Measurement accuracy		±0.5 µm 0.000020"^*2
Sampling cycle		16,000 samples/sec.^*3
Light source		InGaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP67 (including connector part)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Approx. 4.8 kg
^1 A ±2σ margin of error when measuring a ø1.0 mm ø0.04" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^2 Margin of error when a moving ø1.0 mm ø0.04" rod is measured in the 2 mm x 2 mm 0.08" x 0.08" measurement area. ^*3 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function.

Keyence LS-9006 Keyence

0.00 kr

Sold Out

Specifications

Model		LS-9006^*1
Type		Head: Small-diameter model
Measurement range		0.04 mm (0.01 mm) to 6 mm 0.001" (0.0004") to 0.24"
Smallest detectable object		0.04 mm (0.01 mm) 0.001" (0.0004")
Transmitter/receiver distance		60 ±5 mm 2.36" ±0.2"
Repeatability		±0.03 µm^*2
Measurement accuracy		±0.5 µm 0.000020"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	4 x 5 mm 0.16" x 0.2"
	Smallest detectable object	0.04 mm 0.001"
	Repeatability	±0.02 mm 0.0008"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Not provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 130 g Receiver: Approx. 280 g Base: Approx. 180 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø1.0 mm ø0.04" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø1.0 mm ø0.04" rod is measured in the 2 mm x 4 mm 0.08" x 0.16" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø1.0 mm ø0.04" rod in the center of the measurement area with the average measurement number set as 512 times.

Keyence LS-9501P Keyence

121,795.00 kr

Only 5 units left

Specifications

Model		LS-9501P^*1
Type		Controller: PNP output type
No. of connectable sensor heads		2
Head compatibility		Yes
Display	Minimum display unit	0.01 µm
	Display range	±99,999.99 µm to ±9,999.9 mm
	LED display	POWER ON indicator, ERROR indicator
Input terminal block	Encoder input	NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
	Synchronous 1, 2 input	Voltage input
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Storage trigger input
	Storage enable input
	Storage data clear input
	Statistics 1, 2 input
	Statistics clear 1, 2 input
	Program selection input	Voltage input x 4 inputs
Output terminal	Analog voltage output	±10 V x 2 outputs, output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, compatible load max. 350 Ω
	Universal output	PNP open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable
	Status 1, 2 output	PNP open-collector output
	Total judgment output
	Memory FULL output
	Strobe 1, 2 output
	Error output	PNP open-collector output (N.C.)
Interface	Ethernet	1000BASE-T/100BASE-TX^*2
	USB	USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)^*2
	RS-232C	Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
	Display and settings panel	LS-D1000 Max. four heads connectable
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*3
Environmental resistance	Ambient temperature	When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 1,500 g
^1 PNP open-collector output rating: 50 mA max. (30 V max.), residual voltage of 1 V max. Voltage input rating: Input max. voltage 26.4 V, min. ON voltage 10.8 V, OFF current 0.6 mA max. ^2 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^*3 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads.

Keyence LS-9501 Keyence

97,279.00 kr

Only 3 units left

Specifications

Model		LS-9501^*1
Type		Controller: NPN output type
No. of connectable sensor heads		2
Head compatibility		Yes
Display	Minimum display unit	0.01 µm
	Display range	±99,999.99 µm to ±9,999.9 mm
	LED display	POWER ON indicator, ERROR indicator
Input terminal block	Encoder input	NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output
	Synchronous 1, 2 input	Non-voltage input
	Auto-zero 1, 2 input
	Reset 1, 2 input
	Storage trigger input
	Storage enable input
	Storage data clear input
	Statistics 1, 2 input
	Statistics clear 1, 2 input
	Program selection input	Non-voltage input x 4 inputs
Output terminal	Analog voltage output	±10 V x 2 outputs, output impedance 100 Ω
	Analog current output	4 to 20 mA x 2 outputs, compatible load max. 350 Ω
	Universal output	NPN open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable
	Status 1, 2 output	NPN open-collector output
	Total judgment output
	Memory FULL output
	Strobe 1, 2 output
	Error output	NPN open-collector output (N.C.)
Interface	Ethernet	1000BASE-T/100BASE-TX^*2
	USB	USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible)^*2
	RS-232C	Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps
	Display and settings panel	LS-D1000 Max. four heads connectable
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected^*3
Environmental resistance	Ambient temperature	When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 1,500 g
^1 NPN open-collector output rating: 50 mA max. (40 V max.), residual voltage of 1 V max. Non-voltage input rating: ON voltage of 1 V max., OFF current of 0.6 mA max. ^2 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^*3 Add the current consumption values for all units when connecting the display settings panel and expansion units. When the LS-9006D or LS-9030D is connected, it counts as two heads.

Keyence TM-H1C Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88775 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88576 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88575 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87601 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87262 Keyence

22,338.00 kr

Only 1 unit left

Specifications

Model				OP-87262
Type				Dedicated Stand for Mounting 12-inch LCD Monitor
Applicable product				CA-MP120T, CA-MP120

Keyence OP-26486 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-26486
Type				Connector
Overview				Modular ⇔ D-sub 9-pin connector.

Keyence OP-87133 Keyence

17,394.00 kr

Only 2 units left

Specifications

Model				OP-87133
Overview				SD card with industrial specifications
Memory capacity				512 MB

Keyence CA-SD4G Keyence

9,676.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Previous Page 29 / 30Next