Machine Vision Systems

Model

OP-86935

Type

Horizontal Fittings

Applicable product

SZ

Material

SPHC

Weight

Approx. 250 g

Model

FW-V20

Type

NPN

Rating

Power voltage

24 VDC, ripple (P-P): 10% or less

Current consumption

When connected with the FW-H02/H07

Normal

1680 mW (70 mA) or less^*1

Power save

1370 mW (57 mA) or less^*1

When connected with the FW-H10R

Normal

2640 mW (110 mA) or less^*1

Power save

2330 mW (97 mA) or less^*1

Display power

Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", red; lower characters: 5.7 mm 0.22", green),
display update cycle: 10 times/sec. (5 times/sec. when averaging the display)

Operation status indicators

Red LED × 2 (corresponding to control output 1 and control output 2), green LED × 2 (display channel indicators)

Chattering prevention function

Off, 0.5, 1, 2, 5, 10 s selectable (When the FW-H10R is connected, this is selectable between off, 1, 2, 5, and 10 s.)

Bank/external shift input

No-voltage input (with contacts, without contacts), input time: 25 ms or more (switchable with analog output)

Control output

Maximum NPN open-collector output: 100 mA (40 V or less),
residual voltage: 1 V or less, 2 outputs (N.O./N.C. switchable)

Protection circuit

Reverse polarity protection, overcurrent protection, surge absorption

Analog output

4 to 20 mA, maximum load resistance: 260 Ω (Bank/external shift input/analog output selectable)

Environmental resistance

Ambient temperature

-10 to +55 °C 14 to 131 °F (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis

Material

Main unit and cover: polycarbonate, key tops: elastomer

Accessories

Mounting bracket, power cable, instruction manual

Weight

Approx. 85 g (Including a 6.6' 2-m power cable)

Model

CV-L6

Focal point

6 mm 0.24"

F-stop range (aperture)

F1.6 to CLOSE

Minimum WD

0.2 m 0.7'

Mount

C-mount

Filter size

30.5 mm 1.20" P0.5

Compatible image sensor size

1/2"

TV distortion

-1.8 % (-1.4 %)^*1

Resolving power

100 cycles/mm at center, 40 cycles/mm on periphery

Ambient temperature/humidity range

0 to +50°C 32 to 122°F, 80% RH or less (No condensation)

Polarizing filter

OP-54030

Protective filter

CA-LF30

Weight

Approx. 70 g

Model

SZ-VP20

Type

18-core Power cable

Applicable product

SZ-V Series

Cable end

Connector (connected to the SZ-V) - Loose wires

Length

20 m 65.62'

Material

PVC

Weight

Approx. 1,500 g

Model

SZ-V32NX ^*1

Type

Network Type (PROFIsafe)

Detection capability

Minimum detectable object size

Diameter 20, 30, 40, 50, 70, 150 mm 0.79", 1.18", 1.57", 1.97", 2.76", 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max. ^*2

Detectable angle

190° ( -5° to 185° )

Response time (ON to OFF)

Standard Mode

Scan Cycle A

160 ms (2scans) to 1280 ms (16scans) ^{*3 *4}

Scan Cycle B

168 ms (2scans) to 1344 ms (16scans) ^{*3 *4}

Scan Cycle C

176 ms (2scans) to 1408 ms (16scans) ^{*3 *4}

High Speed Mode

Scan Cycle A

80 ms (2scans) to 640 ms (16scans) ^{*3 *4}

Scan Cycle B

84 ms (2scans) to 672 ms (16scans) ^{*3 *4}

Scan Cycle C

88 ms (2scans) to 704 ms (16scans) ^{*3 *4}

Response time (OFF to ON)

Response time (ON to OFF) + 150 ms

Protection zone

Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"

8.4 m 27.56' (Standard Mode) 5.7 m 18.70' (High Speed Mode)

Minimum detectable object size: 50 mm 1.97"

5.6 m 18.37' (Standard Mode) 3.8 m 12.47' (High Speed Mode)

Minimum detectable object size: 40 mm 1.57"

4.3 m 14.11' (Standard Mode) 2.9 m 9.51' (High Speed Mode)

Minimum detectable object size: 30 mm 1.18"

2.9 m 9.51' (Standard Mode) 2.0 m 6.56' (High Speed Mode)

Minimum detectable object size: 20 mm 0.79"

1.6 m 5.25' (Standard Mode) 1.1 m 3.61' (High Speed Mode)

Warning zone

Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"

26 m 85.30' (Standard Mode) 23 m 75.46' (High Speed Mode) ^*5

Minimum detectable object size: 50 mm 1.97"

25 m 82.02' (Standard Mode) 21 m 68.90' (High Speed Mode) ^*5

Minimum detectable object size: 40 mm 1.57"

24 m 78.74' (Standard Mode) 20 m 65.62’ (High Speed Mode) ^*5

Minimum detectable object size: 30 mm 1.18"

23 m 75.46' (Standard Mode) 18 m 59.06' (High Speed Mode) ^*5

Minimum detectable object size: 20 mm 0.79"

21 m 68.90' (Standard Mode) 15 m 49.21' (High Speed Mode) ^*5

Additional safety distance

100 mm 3.94" ^*6

Maximum measurement distance

60 m 196.85' ^*7

Maximum number of banks

Max. 32 banks

Multiple scanner heads

Max. 3 scanner heads

Camera monitoring area

Monitor area: over 190° (-5° to 185°) ^*8

Display

QVGA 2.2inch color LCD

Light source

Type, wavelength

Infrared laser diode, 905 nm

Laser Class

IEC

Class1 IEC/EN60825-1

FDA

Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice) ^*9

JIS

Class1 JIS C6802

Control output (OSSD)

Output

Transistor outputs (NPN or PNP is selected in the software)

Number of outputs

2 outputs

Max. load current

500 mA ^*10

Residual voltage (during ON)

Max. 2.5 V (with a cable length of 5 m 16.40')

OFF-state voltage

Max. 2.0 V (with a cable length of 5 m 16.40')

Leakage current

Max. 1 mA ^*11

Max. capacitive load

2.2 μF (with a load resistance of 100 Ω)

Load wiring resistance

Max. 2.5 Ω

Inputs

PNP

ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)

NPN

ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)

Non-safety related output (AUX output)

Output type

Transistor outputs (NPN or PNP is selected by the dedicated PC software)

Number of outputs

4 outputs

Max. load current

Max. 50 mA

Residual voltage (during ON)

Max. 2.5 V (with a cable length of 5 m 16.40')

Muting lamp

Incandescent lamp (24 VDC, 1 to 5.5 W) or LED lamp (load current: 10 to 230 mA) can be connected

Interface

USB

USB2.0

Ethernet

Standard

IEEE802.3u (100 BASE-TX)

Transmission rate

100 Mbps

Cable

STP(Shielded Twisted Pair)
cable or UTP(Unshielded Twisted Pair) cable. Category5 or higher.

Connector

RJ45 (IP65) 2 ports

Network function

PROFIsafe, PROFINET, EtherNet/IP™, UDP

Cable length

Power and I/O cable

30 m 98.43' or less ^*12

Between scanner head and display unitc

20 m 65.62' or less each ^*13

Ethernet cable

100 m 328.08' or less ^*14

Approved standards

EMC

EMS

IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)

EMI

EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA

Safety

IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508,
EN ISO13849-1, 2015 (PLd, Category3), UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8

Rating

Power consumption

13.4 W (without load), 50.8 W (with load) ^*15

Power voltage

24 VDC ±10% (Ripple P-P 10% or less): When using a converter power supply, 24 VDC +20%/-30%: When using a battery

Environmental resistance

Enclosure rating

IP65(IEC60529)

Ambient light

Incandescent lamp: 1500 lux or less ^*16

Operating ambient temperature

-10 to +50°C 14 to 122°F (No freezing)

Operating relative humidity

35% to 85% RH (No condensation)

Storage temperature

-25 to +60°C -13 to +140°F (No freezing)

Storage relative humidity

35% to 95% RH

Vibration resistance

10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions

Shock resistance

100 m/s² 328.08 ft/s² (Approx. 10 G) 16 ms pulse, in X, Y, Z directions 1000 times each axis

Material

Scanner head

Main unit case

Magnesium

Window

Polycarbonate, PEI

Indicator part

Aluminum, PES

Display unit

Case

Magnesium, PPS, Polycarbonate

System memory

Aluminum, PPE

Weight

Approx. 2300 g