Machine Vision Systems

14,867.00 kr

Only 2 units left

Specifications

Model				SV2-M075AK
General specifications	Applicable servo amplifier			SV2-075L2
	Rated output			750 W
	Rated torque			2.39 N·m ^*1
	Instant maximum torque			8.36 N·m
	Rated current			4.4 Arms
	Instant maximum current			16.9 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.584 N·m/Arms
	Rotor moment of inertia			1.59 ×10^-4kg·m²
	Rated power rating			35.9 kW/s
	Rated angle acceleration			15000 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			12 ×
	Approx. weight			2.2 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence OP-88165 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PX-10 Keyence

4,227.00 kr

Only 5 units left

Specifications

Model		PX-10
Type		Cable type
Output		NPN
Response time		500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Output selection		LIGHT-ON/DARK-ON
Indicator lamp		- Operation indicator：Red LED x 2, DSC orange LED x 1 - Dual digital monitor：Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range：0 to 65504, excess gain：0 P to 999 P] - Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations. - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] - Scaling display
Detection mode		Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]
Shift function		Variable between –1999 and 9999
Timer function		Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable：1 ms to 9999 ms Maximum error against the setting value：10% max.
Control output		NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.
External input		Input time 2 ms (ON)/20 ms (OFF) min.
Interference prevention		Up to 4 units (in all power modes)^*1
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less, Class2^*2
	Power consumption	Standard mode：50 mA max. at 24 V/55 mA max. at 12 V Power saving mode：40 mA max. at 24 V/45 mA max. at 12 V
Environmental resistance	Enclosure rating	IEC: IP67/JEM: IP67/NEMA: 4X
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBR
Weight		Approx. 100 g (Including cable)
^1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. ^2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72). ^*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

Keyence GL-VB21 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-VB21
Number included				2
Material				Installed bracket: PA (GF50%), SUSXM7
Weight				90 g 3.17 oz ^*1
^*1 GL-V Mounting includes two mounting brackets. The weight stated is for both items.

Keyence FD-M10A Keyence

0.00 kr

Sold Out

Buy the Keyence FD-M10A - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence FD-M10A is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence GL-VM08LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM08LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			8
Total length			320 mm 12.60"
Detection height			280 mm 11.02"
Protection height			365 mm 14.37"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	4.1
		OFF→ON	45.7 ^*3
		All blocked→ON	51.2 ^*4
	With channel A or B	ON→OFF	10.3
		OFF→ON	57.1 ^*3
		All blocked→ON	70.8 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	66 ^*5
		Receiver	79 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	49 ^*5
		Receiver	56 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		220 g 7.76 oz
	Receiver
	Total		440 g 15.53 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence FD-MH100A Keyence

5,574.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-5F Keyence

0.00 kr

Sold Out

Specifications

Model		FU-5F^*1
Optical axis diameter (Standard target to be detected)		ø1 mm0.039"
Size		ø3 mm0.118"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2
Minimum bend radius		R25 mm0.984"
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 19 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence OP-87379 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-87379
Type				Waterproof Adapter A
Overview				Used when small diameter fiber unit is used with water-proof amplifier FS-N15CN/FS-N15CP.
Applicable product				FS-N15CN/N15CP + Φ 1.3 fiber unit
Number included				1 pcs.
Note				This is included with the FS-N15CN/N15CP water-proof amplifier. Use this product when using the small-diameter (1.3) fiber unit (however, the rating is IP65 not IP66).

Keyence OP-88417 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89039 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-89039
Length				10 m 32.8'

Keyence GL-RS1 Keyence

0.00 kr

Sold Out

Specifications

Model				GL-RS1
Type				Joint Cable
Number included				1 cable
Cable end				Both ends of the connector (Black) are the same shape. The connector can be connected in either direction.
Length				1 m 3.28'
Material				Main unit connection connector: PBT, Cable: PVC
Note				Use this when using the product in a one-line system or when connecting the product in series.
Weight				Approx. 70 g

Keyence OP-87977 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-57TE Keyence

0.00 kr

Sold Out

Specifications

Model		FU-57TE^*1
Optical axis diameter (Standard target to be detected)		ø0.7 mm0.028"
Size		6 × 10.5 × 2.5 mm0.236" × 0.394" × 0.098"
Fibre unit length		1 m39.37" free-cut
Fibre unit diameter		ø1.0
Minimum bend radius		R4 mm0.157" high-flex
Minimum detectable object		Object with a diameter of 0.005 mm0.0002"^*2
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Weight		Approx. 5 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence FS-V21X Keyence

4,952.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88217 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-NC16ETE Keyence

6,232.00 kr

Only 4 units left

Specifications

Model			KV-NC16ETE
Expansion output unit	External connectionmethod		MOSFET output (With overcurrent protection function)^1^2
	External connection method		European terminal block
	Rated load		30 VDC, 0.2 A^*3
	Leakage current (when output is OFF)		100 μA or less
	Residual voltage (at ON)		0.6 VDC or less
	ON resistance		-
	Common method		16 points/1 common (16 terminals)^*4
	Response time	OFF to ON	100 μs or less (with a load of 1 mA or more)
		ON to OFF	200 μs or less (with a load of 1 mA or more)
	Relay life		-
	Relay replacement
Internal current consumption			30 mA or less
Weight			Approx. 120 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015.), until the cause of the problem is removed. ^2 Sink output types use MOSFET (N-ch) output. Source output types use MOSFET (P-ch) output. ^3 The rated load of each common terminal is 3.2 A ^4 The COM terminals are shorted internally.

Keyence IX-360W Keyence

27,325.00 kr

In stock, 17 units

Specifications

Model				IX-360W
Reference distance				360 mm 14.17"
Measuring distance				280 to 440 mm 11.02" to 17.32"
Detection area	Scan mode			Measuring distance of 280 mm 11.02": 150 × 113 mm 5.91" × 4.45" Measuring distance of 360 mm 14.17": 192 × 144 mm 7.56" × 5.67" Measuring distance of 440 mm 17.32": 234 × 176 mm 9.21" × 6.93" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 280 mm 11.02": 150 mm 5.91" Measuring distance of 360 mm 14.17": 192 mm 7.56" Measuring distance of 440 mm 17.32": 234 mm 9.21" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class 2 laser product (IEC 60825-1: 2014, FDA [CDRH] Part 1040.10 ^*2)
	Output			2.8 mW
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø3.8 mm ø0.1496" ^*3
			Average height	ø2.6 mm ø0.1024" ^*4
			Pin height	ø1.9 mm ø0.0748" ^*5
		Line mode		2.6 mm × 2.6 mm 0.1024" × 0.1024" ^*6
	Repeatability			150 μm ^*7
Width(X direction)	Minimum edge detection	Line mode		2 mm 0.0787" ^*8
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*7
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*9
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 3000 lux or less ^*10
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*11
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 300 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^3 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^6 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^7 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^8 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^9 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^10 Using the default settings with a laser light source as the target. ^*11 With metal mounting.

Keyence KV-N11L Keyence

0.00 kr

Sold Out

Specifications

Model			KV-N11L
Transmission specifications	Electrical termination (Terminator)		Set with the switch on the front panel of the main unit
	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
	Transmission method		RS-422A/RS-485 (4-wire) : Full duplex, RS-485 (2-wire) : Half duplex
	Data format	Start bit	1 bit
		Data bits	7 bits, 8 bits
		Stop bits	1 bit, 2 bits
	Error detection	Parity	Even, odd, none
	RS/CS flow control		―
Interface	Communication standard		RS-422A/RS-485 (4-wire), RS-485 (2-wire)
	Connection		European terminal block (cannot be removed or reconnected)
Transmission specifications	Transmission distance		Extendable up to 1200 m 3937.0'^*1
	Number of transmission units		32^*1
Indication			SD (orange), RD (orange)
Weight			Approx. 30 g
^*1 This varies depending on the model. For details, see the KV Nano Series “Serial Communication Function User’s Manual.”

Keyence GL-VM39FN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM39FN
Beam axis spacing/Lens diameter			10 mm 0.39": ø4 ø0.16"
Number of beam axes			39
Total length			400 mm 15.75"
Detection height			380 mm 14.96"
Protection height			404 mm 15.91"
Minimum detectable object size			ø14 mm ø0.55" ^*1
Detecting distance			0.3 to 12 m 1.0' to 39.4' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.5
		OFF→ON	49.7 ^*3
		All blocked→ON	57.2 ^*4
	With channel A or B	ON→OFF	15.6
		OFF→ON	63.1 ^*3
		All blocked→ON	84.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	79 ^*5
		Receiver	90 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	55 ^*5
		Receiver	60 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		270 g 9.53 oz
	Receiver
	Total		540 g 19.06 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence LS-7030MT Keyence

6,724.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88925 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88925
Type				Dedicated power supply cable M12, 8-pin female to 8 pin male, extention
Length				10 m 32.8'

Keyence MB-PH1 Keyence

0.00 kr

Sold Out

Specifications

Model				MB-PH1
Type				Marking Builder Plus
Supported operating systems				Windows 10, Windows 11 ^*1
Supported languages				Japanese, English, Simplified Chinese, Traditional Chinese, German, Korean, French, Spanish, Thai, and Italian
CPU				Clock : 2GHz or higher, number of cores : two or more
Memory capacity				2 GB or higher (32 bit OS), 4 GB or higher (64 bit OS)
Display resolution				1366 x 768 pixels or higher
Free disk space				2 GB or higher
^*1 Windows is a registered trademark of Microsoft Corporation (USA) in the United States and other countries.

Keyence CA-EN100H Keyence

35,436.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.