Machine Vision Systems

0.00 kr

Sold Out

Specifications

Model		MP-FG20R
Type		Standard model
Connection bore diameter		G1/2" (15A)
Supported gases		Air and non-corrosive gases
Supported gas temperature		-5 to +50°C, 23 to 122°F
Operating pressure range		0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi ^*1
Pressure resistance		1.5 MPa, 15 bar, 217.5 psi
Flow rate	Detection principle	Heat based (mass flow rate)
	Rated flow range (normal)	4 to 2000 L/min 0.2 to 120.0 m³/h 7.06 to 4237.76 ft³/h 0.1 to 70.6 CFM
	Zero cut flow rate	4 L/min, 0.2 m³/h 7.06 ft³/h, 0.1 CFM
	Measurement accuracy	±(1.5% of RD + 0.5% of F.S.) ^2 ^3
	Repeatability	±1.0% of F.S. (with an averaging time of 1.0 s)
	Display resolution	1 L/min, 0.1 m³/h 3.53 ft³/h, 0.1 CFM
	Response time	150 ms (63% response) ^*4
	Averaging time	OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable)
Pressure (Digital value, gauge pressure)	Rated pressure range	0.000 to 1.000 MPa, 0.00 to 10.00bar, 0.0 to 145.0 psi
	Measurement accuracy	±2.0% of F.S.
	Repeatability	±0.2% of F.S. (with a response time of 50 ms)
	Display resolution	0.001 MPa, 0.01 bar, 0.1 psi
	Response time	Selectable from 10 ms, 50 ms, 100 ms, 500 ms, 1.0 s, and 5.0 s ^*4
Humidity (Dew point)	Rated relative humidity range/ dew point range	15 to 100%RH (no condensation)/Corresponds to the relative humidity range ^5 ^6
	Measurement accuracy	±4°C, ±7°F ^5 ^6
	Display resolution	5%RH/1°C, 1°F ^5 ^6
Temperature	Measurement accuracy	±2.0°C, ±3.6°F ^*7
	Display resolution	0.1°C, 0.1°F ^*7
Shut-off valve	Response time	1 s or less (closed → open)
	Leakage amount	50 mL/min 0.002 CFM (N) or less
Filter/regulator (Standard model only)	Pressure adjustment range	0.15 to 0.90 MPa
	Filtration degree	5 μm 0.196850 Mil
	Drainage cup capacity	100 cc
Check valve		Available
Display		Color LCD, status indicator
Data accumulation	Accumulation period	Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks
	Data reading	USB 2.0/Ethernet
I/O	Control output (Ch.1/2/3/4/5)	NPN/PNP setting switchable, open collector output 30 VDC or less, N.O./N.C. setting switchable, max. 100 mA/Ch., residual voltage: 2.5 V or less
	Analog output (Ch.1/2)	4 to 20 mA, load resistance: 260 Ω or less ^*4
	External input (Ch.2/3/6)	Short-circuit current: 1.5 mA or less, input time: 20 ms or more
Protection circuit		Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O, overcurrent protection for each output
Power supply	Power voltage	24 VDC +25%/-20% (including ripple), Class 2 or LPS
	Power consumption	1.2 A (300 ms) when opening/closing valve, 100 mA at all other times ^*8 (standalone usage; excluding load current)
Communication interface		USB2.0
Network compatibility		When using only this unit: IO-Link (Specification v1.1/COM3) ^*9 When connecting MP-FEN1 : EtherNet/IP™, PROFINET, Modbus/TCP, MC protocol/SLMP
Environmental resistance	Enclosure rating	IP67 (IEC60529) ^*10
	Ambient temperature	−5°C to +50°C 23°F to 122°F (no freezing) ^*11
	Relative humidity	35%RH to 85%RH (no condensation)
	Vibration resistance	10 to 500 Hz; power spectral density: 0.204 G²/Hz; X, Y, and Z directions
	Shock resistance	300 m/s², XYZ axes, 10 times for each axis
Material		Sensor part : PET/PPS/PBT/POM/aluminum/SPHC Filter/regulator : Aluminum/POM/HDPE/NBR/Nylon ^*12
Weight		Approx. 1900 g 67.02 oz (excluding drainage cup)
^1 An upstream side pressure of 0.2 MPa or less (a filter/regulator adjustment pressure of 0.2 MPa or less for the standard model) worsens the flow rate characteristic of the shut-off valve. ^2 This value is guaranteed by KEYENCE inspection facilities while testing with air. Errors will be introduced by factors such as the gas type, gas temperature, and ambient temperature. ^3 Value in an environment with a constant temperature of 25°C 77°F and compressed air evaluated as purity class 11 (ISO 8573-1 (2010)/JIS B 8392-1 (2012)).±(5.5% of RD + 0.5% of F.S.) when equivalent to purity class 34. ^4 15 ms is added to the analog output response time. ^5 Measurable when at least 2% of F.S. worth of gas is flowing. ^6 The prescribed accuracy may not be met or the unit may be damaged if the compressed air contains a large amount of oil mist, organic solvent, or other gas. (For details, see “Gas Being Measured” on page 4.) ^7 When the flow is 5% of F.S. or higher. Errors due to heat generated by the main unit occur when the flow is too small. ^8 When connecting MP-FEA1 and/or MP-FEN1, add each device’s current consumption (2.1 A or less including load current). ^9 Use an IO-Link master that can supply 1.2 A or more. (1.6 A or less when connecting an MP-FEA1 and an MP-FEN1.) IO-Link is a registered trademark or trademark of PROFIBUS Nutzerorganisation e.V. (PNO). ^10 When protection is provided to prevent dust and liquid from intruding through the exhaust port. The IP67 enclosure rating is lost when a USB connection is established. ^11 If this product is used with a power supply voltage of 26.4 V or more, the upper limit on the ambient temperature is 45°C 113°F. ^12 Nylon is only used on the MP-Fx20R.

Keyence BL-1300HA Keyence

4,881.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT3-V8 Keyence

12,489.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence TM-3000 Keyence

3,869.00 kr

Only 1 unit left

Specifications

Model		TM-3000
Head compatibility		Compatible
Number of connectable sensors		2 units max.^*1
Display	Minimum display unit	0.01 µm, 0.001 mm², 0.01 °
	Maximum display range	±9999.99 mm ±393.7", ±99999.9 mm², ±99999.9°
Input terminal block	Laser remote interlock input	Non-voltage input^*2
	Trigger input (for Head A)
	Timing 1 input
	Auto-zero 1 input
	Reset input
Output terminal block	Analog voltage output	±10 V x 2 outputs, out put impedance: 100 Ω^*2
	Total judgment output	NPN open-collector output^*2
	Error output	NPN open-collector output (N.C.)^*2
	Process output	NPN open-collector output^*2
	Trigger input enable output
	Adjusted error output
Expansion connector	Trigger input (for Head A)	Non-voltage input^*2
	Timing 2 input
	Auto-zero 2 input
	Program switching input	Non-voltage input, 4 inputs^*2
	Memory card save input	Non-voltage input^*2
	Judgment/Binary output	3-level judgment output: OUT1 to OUT16, total judgment output Binary output: OUT1 to OUT16 measured data output (21 bits) NPN open-collector output^*3
	Strobe output	NPN open-collector output^*2
	Trigger input enable output
Analog RGB monitor output		SVGA (800 x 600 pixels)
RS-232C interface		Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface		In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface		1000BASE-T/1000 BASE-TX/10 BASE-T
Memory card		SD card CA-SD4G (4GB), CA-SD1G (1GB) support
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption.	1 head connected 480mA max./ 2 heads connected 550mA max.
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
Material		Polycarbonate
Weight		Approx. 1,120 g
^1 1 or 2 units can be connected only with the same head model ^2 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA) ^*3 • The rating of the NPN/PNP open collector output (output terminal block): 50 mA (30 V or less) max., residual voltage: 1.4 V or less (50 mA) 1.0 V (20 mA) • The rating of the NPN/PNP open collector output (expansion connector): 50 mA (30 V or less) max., residual voltage: 1.0 V or less • Rating for non-voltage input, ON voltage 1V max., OFF current 0.3mA max. (trigger input terminal, ON voltage 5V max., OFF current 1mA max.) • Voltage rating, maximum rating 26.4V, ON voltage 10.8V, OFF current 0.3mA (trigger input terminal maximum rating 26.4V, ON voltage 10.8V, OFF current 1mA). OUT 1 to OUT 8 decision result, OUT 9 to OUT 16 decision result, time share output of binary measurement data.

Keyence MB-HLD Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LS-C10AM Keyence

0.00 kr

Sold Out

Specifications

Model				LS-C10AM
Type				Camera cable
Applicable product				LS-7000 series
Number included				1
Cable end				Straight
Length				10 m 32.8'
Note				Up to two cables are connectable, provided that the total length is a maximum of 40 m 131.2'.
Weight				Approx. 450 g

Keyence WM-H1C Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CVH-Z250R Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV2-G500MA Keyence

7,068.00 kr

In stock, 13 units

Specifications

Model		IV2-G500MA
Type		Standard model
Reference distance		20 to 500 mm 0.79" to 19.69"
Field of view		Installation distance of 20 mm 0.79": 10 (H) × 7.5 (V) mm 0.39" (H) × 0.30" (V) to Installation distance of 500 mm 19.69": 200 (H) × 150 (V) mm 7.87" (H) × 5.91" (V)
Indicators		2 (the same display details for both indicators)
Image receiving element	Type	1/3 inch monochrome CMOS
	Number of pixels	752 (H) × 480 (V)
Focus adjustment		Automatic^*1
Exposure time		1/10 to 1/50000
Lights	Illumination	White LED
	Lighting method	Switchable between pulse lighting and DC lighting
Environmental resistance	Enclosure rating	IP67^*2
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85% RH (No condensation)
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions^*3
	Shock resistance	500 m/s² 1640.4'/s², 6 times in each of the 3 directions^*3
Material		Main unit case: Zinc die-casting, Front cover: Acrylic (hard coat), Operation indicator cover: TPU
Weight		Approx. 75 g
^1 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program. ^2 Except when the polarized light filter attachment (OP-87899/OP-87900/OP-87901) or the magnifying lens attachment (OP-87902) is mounted. ^*3 Except when the IV2 dome attachment (IV2-GD05/IV2-GD10) is mounted.

Keyence IX-H2050 Keyence

12,847.00 kr

Only 6 units left

Specifications

Model			IX-H2050
Main unit / expansion unit			Expansion unit
Display	Min. display unit	Z axis	10 μm ^*1
		X axis	50 μm ^*1
	Display range	Z axis	±999.99 to ±999 mm 39.33" (with 4 selectable steps) ^*1
		X axis	±999.95 to ±999 mm 39.33" (with 4 selectable steps) ^*1
Tools	Scan mode		Height, Step, Average height, Pin height, MAX/MIN, Height area, Monochrome area, Width, Step calculation, Thickness calculation, Position adjustment, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgment: 16 tools, Position adjustment: 1 tool^*2
	Line mode		Height (Ave./Max./Min.), Step (Ave./Max./Min.), Edge position, Width/diameter, Step/width calculation, Thickness calculation, Position adjustment, Tilt adjustment (Max. number of settings) Judgment: 16 tools ^3, Position adjustment: 1 tool, Tilt adjustment: 1 tool^2
Other functions	Common		Zero/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording, Capture mode (HDR), Sensor date/time information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF), Total judgment conditions, NPN/PNP switching, Simultaneous main unit/expansion unit input, Mutual interference prevention, Security
	Scan mode		Measurement range, Measurement position (small/standard/large), Measurement mode, Measurement noise elimination, Imaging mode (high gain), Tilt correction (fixed or real-time correction), Glare removal, Trigger input (internal/external), Trigger interval, Trigger delay, Trigger error, Monochrome histogram, Area height histogram, Fixed reference area, Mask outline, Rotation range, Height image display on tool setting screen, Scaling function
	Line mode		Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement, HOLD function, Alarm setting, Measurement method (Ave./Max./Min.), Laser sensitivity adjustment, Averaging filter, Median filter, X-axis median filter
Input	Input		Switchable between non-voltage input and voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs		8 (IN1 to IN8)
	Function		IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Laser emission stop, Zero/offset (batch), Reset (error only), Reset (judgment value only) Reset (judgment value and error)
Output	Output		Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 2 V or less
	Number of inputs		10 (OUT1 to OUT10)
	Function		Enable by assigning the optional functions Assignable functions: Total judgment result (All OK/Any OK/NG), Run, Busy, Error, Position adjustment result, Tilt adjustment result, Result of the logical operation of each tool, Monochrome area / Height area tool result (OK/NG), Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Alarm
Analog voltage output			Not available
Analog current output
Number of programs			32
Statistical information			Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) ^1 ^4
Detection history	Saved history	Scan mode	50 (FTP/SFTP client function: Enabled/High-resolution mode: Enabled) 80 (FTP/SFTP client function: Enabled/High-resolution mode: Disabled) 70 (FTP/SFTP client function: Disabled/High-resolution mode: Enabled) 100 (FTP/SFTP client function: Disabled/High-resolution mode: Disabled) ^*5
		Line mode	400 (FTP/SFTP client function: Enabled/High-resolution mode: -) 500 (FTP/SFTP client function: Disabled/High-resolution mode: -) ^*5
	Save conditions		Selectable between NG only and All ^*5
Image data transmission (FTP/SFTP client function)	Destination		FTP/SFTP server
	Method		Selectable between bmp, jpeg, and txt
	Conditions		4 conditions Selectable between All, Total judgment result (OK/NG), Result of each tool (OK/(NG and ALM)), and Result of the logical operation of each tool (OK/NG)
Ethernet	Standard		Not available ^*6
	Connector
Interface compatibility			CC-Link, DeviceNet®, EtherNet/IP™, EtherCAT®, RS-232C, BCD output, TCP/IP non-procedural communication ^*7
Number of connectible units			Main units: 1, Expansion units: 1, Communication units (DL): 1
Ratings	Power voltage		Supplied from main unit
	Current consumption		Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load) ^*8
Environmental resistance	Ambient temperature		0 to +50°C 32 to 122°F (No freezing)
	Relative humidity		35 to 85% RH (No condensation)
Material			Main unit case: PC / Power connector: PA, POM / Analog output connector: PA, POM / I/O connector: PA / Head connector: Zinc + Ni plating, PA / Ethernet connector: Copper alloy + Ni plating / Rear heat sink: Aluminum / Main unit rear DIN rail fixing tab: POM / Nameplate: PC
Weight			Approx. 190 g
^1 For displaying on an IX Series control panel or PC software. ^2 Configurable for each program. ^3 Up to 8 tools can be used for the diameter tool only. ^4 When sample hold (edge), peak/bottom/P-P hold (level/edge) is set. ^5 Saves to the sensor amplifier’s internal memory. Detection history saved inside the sensor amplifier can be backed up to a PC using the USB memory stick connected to the IX Series control panel or PC software. ^6 For connection to an IX Series control panel or PC software. The RJ45 connector on the main unit is used for connecting to the expansion unit. ^7 When a DL Series device is used. Contact KEYENCE for information on other interfaces. ^8 Includes a DL Series communication unit.

Keyence KV-24R Keyence

10,462.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-RI6X Keyence

5,079.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-F3120C Keyence

0.00 kr

Sold Out

Specifications

Model		MD-F3120C
Type		30 W type wide area type main unit (controller + head)
Console (sold separately)		MC-P1
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	Yb: fiber laser, Class 4 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
	Wavelength	1090 nm
	Output	30 W
Pulse frequency		60 to 120 kHz
Guide laser/Working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 laser product (IEC 60825-1, JIS C6802, FDA [CDRH] Part 1040.10^*1)
Marking area		300 x 300 x 42 mm 11.81" x 11.81" x 1.65"
Standard working distance (±variable width)		300 mm (±21 mm) 11.81" (±0.83")
Marking resolution		5 µm 0.20 Mil
Scan speed		8000 mm 314.96"/s max.
Character type	Font	KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/EAN/UPC/CODE128
	2D code	QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBarLimited/GS1 DataBar Limited CC-A
	Logo image	Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/oval
Marking conditions	Workpiece style	Stationary marking/movement marking (constant speed/encoder)
	Character size (marking height/width)	0.1 to 300 mm 0.003" to 11.81"
	No. of registered programs	2000 settings max.
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, RS-422A, USB 2.0,^*2 Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*3
Head installation direction		All directions
Head cable length		4m
Cooling method		Controller: forced air cooling, head: natural air cooling
Rated voltage and power consumption		100 to 120 VAC or 200 to 240 VAC ± 10 %, 50/60 Hz, Max. 550 VA
Environmental resistance	Enclosure rating	IP64 (Head)
	Pollution degree	2
	Overvoltage category	II
	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	0 to +40 °C 32 to 104 °F
	Ambient humidity for storage	30 to 85 % RH (No condensation)
	Relative humidity
Weight		Controller: 27.0 kg Head: 6.7 kg Console: 1.4 kg
^1 The laser classification is implemented based on IEC 60825-1 in accordance with the requirements of FDA [CDRH] Laser Notice. ^2 The USB port is dedicated for use with the PC software. ^*3 SanDisk cards are recommended.

Keyence FD-V40A Keyence

9,714.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-VM96HN Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM96HN
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			96
Total length			1920 mm 75.59"
Detection height			1900 mm 74.80"
Protection height			1945 mm 76.57"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	7.8
		OFF→ON	53.3 ^*3
		All blocked→ON	64.3 ^*4
	With channel A or B	ON→OFF	25.1
		OFF→ON	82.7 ^*3
		All blocked→ON	118.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	181 ^*5
		Receiver	196 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	61 ^*5
		Receiver	67 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1250 g 44.12 oz
	Receiver		1260 g 44.47 oz
	Total		2510 g 88.60 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence OP-88901 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88901
Female				M12 8pin L-shape
Male				Strand wire
Length				5 m 16.4'
Material				cable: Chemicalresistant PVC connector: PBT

Keyence ER-GR08P Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GR08P
Type		Environment-resistant all-metal shielded type Screw type M8 Cable PNP output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2
Response frequency		80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS316L, Nut: SUS316L, Toothed lock washer: SUS316L [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 65 g 2.29 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence FD-EPB2 Keyence

0.00 kr

Sold Out

Specifications

Model				FD-EPB2
Note				For sensor heads compatible with ø8 0.31" (FD-EPH8)

Keyence GL-R103F-T Keyence

27,157.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GC-RP30 Keyence

0.00 kr

Sold Out

Specifications

Model				GC-RP30
Length				30 m 98.4'^*1
Weight				Approx.1950 g
^*1 Power cable and External power cable are both free-cut. It is possible to cut the cable to a preferred length.

Keyence LV-H300 Keyence

6,147.00 kr

Only 7 units left

Specifications

Model		LV-H300
Type		Area thrubeam , High performance
FDA (CDRH) Part 1040.10		Class II
Light source		Visible red semiconductor laser
Output		3.0 mW (FDA), 1.0 mW (IEC)
Wavelength		660 nm
Laser Class	IEC 60825-1	Class II
Detecting area		30 mm 1.18"
Detecting distance		2000 mm 78.74"
Pulse duration		3.5 µs
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material	Case	Glass reinforced plastic
	Lens cover	Transmitter: Glass Receiver: Polyarylate
Weight		Approx. 100 g

Keyence XC-T40B1 Keyence

0.00 kr

Sold Out

Specifications

Model		XC-T40B1
Rated voltage		125 VAC/DC
Rated current		1 A/pin
Ambient operating temperature		−40 to +80°C −40 to +176°F
Screw torque		0.8 N·m (max.)
Applicable wire diameter		AWG22 to 16
Environmental resistance	Insulation resistance	500 VDC, 1000 MΩ or greater
	Withstand voltage	500 VAC, 1 minute, 1 mA or less

Keyence CV-X290A Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence AT-204 Keyence

8,234.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.