Machine Vision Systems

Keyence CV-X102M Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence WI-004 Keyence

0.00 kr

Sold Out

Specifications

Model		WI-004^1^2^*3
Reference distance		18 mm 0.71"
Measurement range	Z	1.4 mm 0.06" (Standard Mode), 0.7 mm 0.03" (High Speed Mode)
	XY	4 × 4 mm 0.16" × 0.16"
Minimum detection area		15 × 15 µm 0.000591" × 0.000591"
Repeatability (height difference)		0.1 µm 0.000004"^*4
Linearity (height difference)		±2.8 µm 0.000110"(±0.2% of F.S., F.S. = 1.4 mm 0.06", +20 to +30°C +68 to +86°F)^*5
Light source for measurement	Type	Infrared SLD
	Center wavelength	830 nm
	Laser class (IEC60825-1)	Class 3R
	Output	3.6 mW
Guide light source	Type	Red semiconductor laser
	Wavelength	660 nm
	Laser class (IEC60825-1)	Class 1
	Output	0.15 mW
Sampling frequency	Internal Trigger	133 ms (High Speed Mode), 266 ms (Standard Mode)
	External Trigger	266 ms max. (High Speed Mode), 532 ms max. (Standard Mode)^*6
Environmental resistance	Ambient light	Incandescent lamp/fluorescent lamp: 5,000 lux max.
	Ambient temperature	0 to +35 °C 32 to 95 °F
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 3,000 g
^1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice.The resolution of the height (distance from head reference plane to measurement workpiece) is 1 µm(2). ^2 This is ±3 σ value (Auto Maintenance Mode is OFF) when the average height of a single rectangular area(3) has been measured for 30 seconds using a KEYENCE standard target. ^3 The rectangular size is WI-001 : 0.3 mm × 0.9 mm 0.01" × 0.04", WI-004 : 1.1 mm × 3.7 mm 0.04" × 0.15", WI-010 : 3 mm × 9 mm 0.12" × 0.35". ^4 This is σ value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(3) has been measured for 30 seconds using a KEYENCE standard target. ^5 This is the value (Auto Maintenance Mode is OFF, Capture Timing is “Prioritize Accuracy”) when the average height difference of two rectangular areas(3) has been measured using a KEYENCE standard target. ^6 The workpiece stopping time at capturing is 120 ms (High Speed Mode) or 240 ms (Standard Mode).

Keyence XG-X1000 Keyence

27,378.00 kr

Only 4 units left

Buy the Keyence XG-X1000 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence XG-X1000 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-CF3 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-N8ETP Keyence

4,056.00 kr

Only 1 unit left

Specifications

Model			KV-N8ETP
Expansion output unit	Output Points		8 points
	External connectionmethod		MOSFET With overcurrent protection function ^1 ^2
	External connection method		Terminal block
	Rated load		30 VDC, 0.5 A
	Leakage current (when output is OFF)		100 μA or less
	Residual voltage (at ON)		0.8 VDC or less (with 0.5 A output) 0.6 VDC or less (with 0.3 A output)
	ON resistance		−
	Common method		8 points/1 common (4 terminals) ^*3
	Response time	OFF to ON	100 μs or less (with a load of 1 mA or more)
		ON to OFF	200 μs or less (with a load of 1 mA or more)
	Relay life		−
	Relay replacement
Internal current consumption			30 mA or less
Weight			Approx. 160 g
^1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the case of the KV-N16ET(P).) , until the cause of the problem is removed. ^2 MOSFET (N-ch) output for the sink output type; and MOSFET (P-ch) output for the source output type. ^*3 The KV-N8ET(P) and KV-N16ET(P) COM terminals are shorted internally.

Keyence SV2-D5C Keyence

0.00 kr

Sold Out

Specifications

Model				SV2-D5C
Type				Motor power cable, Standard cable with electromagnetic brake
Length				5 m 16.4'
Note				for 750 W motor

Keyence EM-080B Keyence

4,305.00 kr

Only 1 unit left

Specifications

Model		EM-080B^*1
Type		Shielded
Shape		8 mm 0.31" dia Cylindrical.
Detecting distance		2.0 mm 0.08" ±10%
Detectable object		Ferrous metals (see Characteristics for non-ferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Hysteresis		10% max. of detecting distance
Response frequency		1.2 kHz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at +23°C 73.4°F, within -10 to +70°C 14 to 158°F
Display indicator		Red LED
Control output		NPN: 200 mA (40 V) max., Residual voltage: 1 V max.
Housing		Stainless steel
Rating	Power voltage	10.8 to 30 VDC, Ripple (P-P) 10 % or less^*2
	Current consumption	12 mA or less
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Weight		Approx. 42 g (including nuts and 2-m 6.6' cable)
^1 The alternative-frequency type of EM-080 ^2 Make sure that the power voltage stays within 10.8 V to 30 V even if it is affected by ripple effects.

Keyence OP-30938 Keyence

3,736.00 kr

Only 3 units left

Buy the Keyence OP-30938 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence OP-30938 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence GL-VM32LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM32LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			32
Total length			1280 mm 50.39"
Detection height			1240 mm 48.82"
Protection height			1325 mm 52.17"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.1
		OFF→ON	48.4 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	14.4
		OFF→ON	64.2 ^*3
		All blocked→ON	83.9 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	134 ^*5
		Receiver	148 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	54 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		840 g 29.65 oz
	Receiver		850 g 30.00 oz
	Total		1690 g 59.65 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence IV4-400CA Keyence

0.00 kr

Sold Out

Specifications

Model		IV4-400CA
Type		Narrow field of view model
Installed distance		From 400 mm 15.75" ^*1
Tools	Available modes	Standard Mode, Sorting Mode, AI Through Count Mode
	Tool with standard mode	Standard/Sorting Modes: AI Differentiate, Outline, ColorArea ^2, Area ^3, EdgePixels, ColorAverage ^2, Brightness Avg ^3, Width, Diameter, Edge Presence, Pitch, Color Prohibit, Position Adjustment, Hi-Sp. Adj (1-axis/2-axis), Blob Count, AI Identify, AI Count, Total, AI OCR, AI Trigger AI Through Count Mode: Count, Total
	Number of tools	65 tools ^*4
Field of view		Installation distance 400 mm 15.75": 58 (H) × 44 (V) mm to Installation distance 3000 mm 118.11": 464 (H) × 348 (V) mm (reference value)
Switch settings (programs)		128 programs (with SD card)/32 programs (without SD card)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Image history	Number of storable images	100 images ^*5
	Save conditions	Logging Settings 1: NG only/OK near NG threshold ^6/All – selectable. Logging Settings 2: Manually configured number before/after NG/Fixed interval – selectable ^5
Focus adjustment		Auto ^*7
Image data transfer	Transfer destination	microSD card/FTP server/SFTP server – selectable
	Transfer format	BMP/JPEG/iv4p/txt: Selectable, file name can be changed
	Transfer conditions	OK/NG/NG and OK near threshold ^6/OK near threshold ^6/All/Judgment Complete – selectable
Exposure time		12 μs to 10 ms ^*8
Analysis information	RUN display	Tool-specific list (judgment results, match, match bar display) ^*9
	RUN information	Switchable between OFF/histogram/processing time/count/output monitor Histogram: Histogram, match (MAX, MIN, AVG), OKs, NGs Processing time: Processing time (latest value, MAX, MIN, AVG), cap. time (latest value, MAX, MIN, AVG) Count: No. of triggers, OKs, NGs, no. of trigger errors, Output monitor: Output-specific ON/OFF status ^*9
Lights	Illumination	White LED
	Lighting method	Switchable between pulse and continuous lighting
Other functions	Image capture function	Digital zoom (×2, ×4), HDR, high gain, color filters ^2, white balance ^2, brightness correction, Smart Image Optimization, preliminary capture, trapezoidal shape correction, mirror inversion correction Capture range settings (with high-speed filter disabled: 1280×960, 640×480, 320×240, 160×120. With high-speed filter enabled: 640×480, 320×240, 160×120, 80×60)
	Tool functions	Additional Learning (AI Differentiate, AI Identify, AI OCR, AI Count, AI Trigger. AI Through Count Mode: Count), remove outline, masking function, color extraction/exclusion ^2, color histogram function ^2, monochrome histogram function ^*3, scaling function
	Utilities	List of NG sensor occurrences, NG hold, test run, I/O monitor, security settings (2-step password, Enhanced Security Mode), simulator ^*10, adding FTP image information, multiple position adjustment, adding multiple masters, high-speed program switching, automatic program switching, automatic settings backup/restore, mid-operation threshold changes, excessive input trigger time detection
Indicators		OUT, TRIG, STATUS, LINK/ACT, SD
Input	Type	Switchable between non-voltage input/voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 30 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current approx. 2 mA (at 24 V)
	Number of inputs	6, 3 of which are selectable between IN/OUT
	Function	IN1: External trigger. IN2, IN3, I/O1 to I/O3: Assign any desired function. Assignable functions: Program switching, error clear, ext. master image registration, SD card save stop, OCR serial no. increment, reset
Output	Type	Open collector output: Switchable between NPN/PNP and N.O./N.C. Maximum rating: 30 V, 50 mA, residual voltage 1.5 V or lower ^*11
	Number of outputs	6, 3 of which are selectable between IN/OUT
	Function	Assign any desired function. Assignable functions (Standard/Sorting Mode): Total status (OK/NG), operation, busy, trigger ready, strobe, position adjustment result, tool-specific judgment results, tool-specific logic calculation results, error, SD card error, parts judgment results, master judgment results, insufficient SD capacity, file transfer in progress, AI Trigger output Assignable functions (AI Through Count Mode): Operation, busy, error, tool-specific count up, tool-specific judgment result, tool-specific logic calculation result
Power/I/O	Connector	M12 12-pin A-code male connector
	PoE	PoE Power Class 4/6 ^*12
Ethernet	Standard	1000BASE-T/100BASE-TX
	Connector	M12 8-pin X-code female connector
Network function		FTP client, SFTP client, SNTP client, OPC UA server, MQTT client
Interface compatibility	Built-in Ethernet	EtherNet/IP, PROFINET CC-B ^*13, TCP/IP Nonprocedural Comm (×2 connections)
	Communication unit (IV4-CU1)	PROFINET CC-C ^*14, EtherCAT®
Expanded memory		microSD card (microSD/microSDHC) ^*15
Power supply	Power voltage	24 V +25%, -20% (including ripple) ^*16
	Power consumption	3.4 A or less (at 19.2 V), 2.7 A or less (at 24.0 V)(no AI imaging illumination unit; with communication unit; includes 120 mA output load) 3.3 A or less (at 19.2 V), 2.6 A or less (at 24.0 V)(no AI imaging illumination unit; no communication unit; includes 120 mA output load) 2.1 A or less (at 19.2 V), 1.8 A or less (at 24.0 V)(with AI imaging illumination unit; with communication unit; includes 120 mA output load) ^*17
	Average power consumption	9.3 W (without AI imaging illumination unit) 12.8 W (with AI imaging illumination unit)
Environmental resistance	Enclosure rating	IP67 ^*18
	Ambient temperature	0 to +50°C 32 to +122°F (no freezing) ^*19
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	Frequency: 10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions ^*20
	Shock resistance	500 m/s² 1640.4 ft/s² 3 times in each of 6 directions ^*20
Material		Main unit case: Aluminum die-casting. Front cover: Acrylic (hard coating). Back plastic cover and plastic lid: PBT. Operation indicator cover: TPU. Power supply connector: PA/POM. Ethernet connector: Copper alloy + nickel plating. Label: PC. Power supply connector waterproof cap: PC + ABS alloy. Ethernet connector waterproof cap: PC ^*21
Weight		Approx. 370 g 13.06 oz (no AI imaging illumination unit) Approx. 560 g 19.77 oz (with AI imaging illumination unit)
^1 If using at 3 m 9.8' or more, it is recommended that the polarizing filter be removed before use. ^2 Color type only. ^3 Monochrome type only. ^4 Can be placed on a program-specific basis. This is the total combined number of differentiation tools and position adjustment tools. Up to 64 differentiation tools can be placed. Up to 16 AI Count/AI OCR tools can be placed. In Sorting Mode, 8 differentiation tools can be placed. In AI Through Count Mode and High Speed/Standard Mode, the number of tools that can be placed is two AI Count tools and one Total tool. For high accuracy, six AI Count tools and two Total tools can be placed. ^5 Saved to the sensor’s internal memory. Images saved to the sensor’s internal memory can be backed up to a PC using the PC software (IV-H1SN) or to a USB memory stick or microSD card plugged into the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10). ^6 AI Differentiate, AI Identify, AI OCR(Show Matching Rate) only. ^7 Focus position can be automatically adjusted during installation. It cannot be adjusted while running. Focus position can be registered separately for each program. ^8 Maximum exposure time is 500 ms only when lighting is set to OFF. ^9 Can be displayed on the control panel (IV4-CP70) or Display Expansion Unit (IV4-DU10), or via PC software (IV-H1SN). ^10 Can be used with PC software (IV-H1SN). ^11 Set total output to 120 mA or less. Residual voltage specifications apply to an output current of 20 mA or less. For an output current of 50 mA, the value is 2.0 V. ^12 For PoE-powered devices, IEEE802.3at Power Class 4 or higher is recommended when using AI imaging illumination units; IEEE802.3bt Power Class 6 or higher is recommended when an AI imaging illumination unit is not in use. When using PoE, device operation may be restricted due to power limitations. ^13 Conformance Class B, applicable protocols: LLDP, SNMP ^14 Conformance Class C, applicable protocols: LLDP, SNMP, MRP ^15 Use KEYENCE-recommended products. ^16 24 VDC +25%/−10% (including ripple) when using OP-88656 (10 m 32.8'). ^17 The system is designed to lower its peak current when equipped with an AI imaging illumination unit. Without it, the peak current will be higher. ^18 Except when polarizing filters (OP-88640/OP-88641/OP-88644/OP-88645) are installed. ^19 When the operating ambient temperature exceeds 40°C 104°F, install in accordance with KEYENCE instructions, taking appropriate measures for heat dissipation to ensure that the case temperature does not exceed the rated 75°C 167°F. Refer to the instruction manual for more information. ^20 Except when dome attachment (IV3-D10) is installed. ^*21 ESD safe and IEC61340-5-1 compliant.

Keyence CG-LC20 Keyence

0.00 kr

Sold Out

Specifications

Model		CG-LC20
Lighting output	Number of channels	1
	Connector	M12 A-coded 5-pin female connector
	Dimming method	Depends on the connected LED lighting
	Gradation	1024-level digital gradation
	Voltage	24 V DC
	Capacity	Maximum 30 W
	Synchronization	Synchronized with trigger or shutter speed to camera/continuous lighting
	Dimming response	Depends on the connected LED lighting
Control interface	Connector	Dedicated 12-pin circular connector
Power source		Supplies power via control interface
Environmental resistance	Enclosure rating	IP67(IEC 60529)
	Ambient temperature	0–50°C (65°C or under for the main device)
	Relative humidity	85% RH or less (no condensation)
	Vibration resistance	10–500 Hz Power spectral density: 0.05 G2/Hz, 0.5 hours in X/Y/Z directions (IEC 60068-2-64)
	Shock resistance	50 G in 6 directions, 3 times each (IEC 60068-2-27)
Size (H×W×D)		21 mm × 100 mm × 26 mm (excluding cable) Total length 400 mm (including cable)
Standard certifications		CE, FCC, NRTL, KC, UKCA
Material		Main device: Polyamide
Weight		Approx. 110 g

Keyence OP-88991 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-88991
Type				Connection Cable
Cable end				M12 female 8-pin - M12 male 5-pin
Length				2 m 6.6'
Material				cable: PVC connector: SUS316L

Keyence OP-M1860 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-85135 Keyence

2,860.00 kr

Only 1 unit left

Specifications

Model				OP-85135
Overview				Attachment to mount slits or polarizing filters. (Used for thrubeam models to prevent interference.)
Applicable product				Threaded PZ-G
Number included				2 per set
Material				Polyacetal (POM)
Note				It cannot be mounted when using one touch mounting bracket PZ-B82.
Weight				Approx. 1 g

Keyence OP-87035 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-85500 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-85500
Overview				This is a connector cable for the M8 connector sensor. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				M8 connector for PZ-G standard (Rectangular) models
Number included				1 pcs.
Cable end				M8 straight - Loose wire
Length				10 m 32.81'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 310 g

Keyence KV-NC32EX Keyence

10,347.00 kr

Only 8 units left

Specifications

Model				KV-NC32EX
Expansion input unit	External connection method			Connector
	Input Points			32 points
	Input terminals			24 VDC mode, 5 VDC mode
	Maximum input voltage			26.4 VDC
	Input rated voltage	24 VDC mode		5.2 mA
		5 VDC mode		1 mA
	Minimum ON voltage	24 VDC mode		19 V
		5 VDC mode		3.5 V
	Maximum OFF current	24 VDC mode		1.5 mA
	Maximum OFF voltage			1.5 V
	Common method			32 points/1 common (2 terminals) ^*1
	Input time constant (four-level switching)	Input time constant setting	OFF to ON: Typ.	25 μs : 10 μs 300 μs : 240 μs 1 ms : 1 ms 10ms : 10 ms
			OFF to ON: Max.	25 μs : 50 μs 300 μs : 290 μs 1 ms : 1.2 ms 10ms : 11 ms
			ON to OFF: Typ.	25 μs : 50 μs 300 μs : 280 μs 1 ms : 1 ms 10ms : 10 ms
			ON to OFF: Max.	25 μs : 150 μs 300 μs : 390 μs 1 ms : 1.2 ms 10 ms : 11 ms
	Input impedance			4.4 kΩ
Internal current consumption				20 mA or less
Weight				Approx. 110 g
^*1 The KV-NC16EX and KV-NC32EX have 2 COM terminals, but these are shared internally.

Keyence GL-S20FH Keyence

8,969.00 kr

Only 5 units left

Specifications

Model				GL-S20FH
Type				Flat type
Detection capability				ø25 mm ø0.98"
Total length				419.5 mm 16.52"
No. of beam				20
Detection height				380mm 14.96"
Protection height				426mm 16.77"
Beam axis spacing				20 mm 0.79"
Operating distance				0.1 to 2 m 0.3' to 6.6'
Effective aperture angle				Max. ±3.75° (when the operating distance is 2 m 6.6')
Light source				Infrared LED (870 nm)
Response time(ms)	Wire synchronization, one-line, or optical synchronization system (channel 0)	ON→OFF		6.6 ^*1
		OFF→ON		48.7 ^1 ^2
		All blocked→ON		63.1 ^1 ^3
	Optical synchronization system (channel A or B)	ON→OFF		8.8 ^*1
		OFF→ON		52.0 ^1 ^2
		All blocked→ON		71.9 ^1 ^3
OSSD operation				Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver				Optical synchronization or wire synchronization (determined by the wiring)
Light interference prevention function				Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output type			2 transistor outputs (PNP or NPN output is determined by the cable type.)
	Max. load current			Max. 300 mA
	Residual voltage (when ON)			Max. 2.5 V (with a cable length of 5 m 16.4')
	OFF state voltage			Max. 2.0 V (with a cable length of 5 m 16.4')
	Leakage current			Max. 200 µA
	Max. load capacitance			2.2 µF
	Load wiring resistance			Max. 2.5 Ω
Inputs 1 and 2				Short-circuit current: approx. 1 mA
Power supply	Current consumption(mA)	When the center indicator is ON	Transmitter	39^*4
			Receiver	62^*4
		When the center indicator is OFF	Transmitter	28^*4
			Receiver	50^*4
	Power voltage			24 VDC ±20%, ripple (P-P) 10% or less, Class 2
Protection circuit				Reverse current protection, short-circuit protection and surge protection for each output
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB/T4584
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	Overvoltage category			II
	Ambient light			Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Operating relative humidity			15 to 85 % RH (no condensation)
	Storage temperature			-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity			15 to 95 % RH
	Vibration resistance			10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case			Polyarylate
Weight	Transmitter			185 g
	Receiver			190 g
^1 If the response time (ON to OFF) exceeds 18 ms, this unit cannot be used as a certified product based on the Chinese standard GB/T4584 “压力机用光电保护装置技术条件”. In the case of series connection, if the total number of beam axes exceeds 100, the response time must be limited to 30 ms or less. When the GL-S units are connected in series, the response time is calculated according to the following steps; 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. (ON → OFF) One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms (OFF → ON) One sub unit connected: 42 ms Two sub units connected: 84 ms ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-S operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-S synchronizes the transmitter and receiver first and then determines the clear or blocked. ^4 The control output (OSSD) current is not included. When inputs are turned ON, the current consumption increases by 1 mA per input.

Keyence OP-87232 Keyence

1,703.00 kr

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-M1883 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence IV2-G30 Keyence

11,711.00 kr

In stock, 18 units

Specifications

Model		IV2-G30
Type		Standard type
Tools	Available modes	Standard mode
	Standard mode built-in tools	Outline, Color area^1, Area^2, Edge pixels, Color average^1, Brightness average^2, Width, Diameter, Edge presence, Pitch, OCR, Color/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)
	Number of tools	Detection tools: 16 tools, position adjustment tool: 1 tool^*3
Switch settings (programs)		128 programs (when using SD card) / 32 programs (when not using SD card)
Indicators		PWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SD
Image history	Number of storable images	1000 images ^*4
	Save conditions	Selectable between NG only, NG and OK near threshold^5, and All ^4
Image data transfer	Transfer destination	Selectable between SD card and FTP server
	Transfer format	Selectable between bmp, jpeg, iv2p, and txt
	Transfer conditions	Selectable between NG only, NG and OK near threshold^*5, and All
Analysis information	RUN display	Tools list (Judgment results, degree of similarity, or degree of similarity bar display) ^*6
	RUN information	Switchable between OFF, histogram, processing time, count, and output monitor Histograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs Processing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.) Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors Output monitor: ON/OFF status by output
Other functions	Image capture function	Image buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Color filter^1, White balance^1, Brightness correction
	Tool functions	Mask outline, Masking function, Color extraction/exclusion^1, Color histogram function^1, Monochrome histogram function^*2, Scaling function
	Utilities	Failing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator^*7
Input	Type	Switchable between non-voltage input and voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs	8 (IN1 to IN8)
	Function	IN1: External trigger, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
Output	Type	Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA, residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or less
	Number of outputs	8 (OUT1 to OUT8)
	Function	Enable by assigning optional functions Assignable functions: Total judgment (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error
Ethernet	Standard	100BASE-TX/10BASE-T
	Connector	RJ45 8-pin connector
Network function		FTP client, SNTP client
Interface compatibility	Built-in Ethernet	EtherNet/IP™, PROFINET, TCP/IP non-procedure communication
	Communication unit	EtherCAT^Ⓡ, CC-Link, DeviceNet^Ⓡ, PROFIBUS, RS-232C^*8
Expanded memory		SD card (SD/SDHC) ^*9
Rating	Power voltage	24 VDC ±10% (including ripple)
	Current consumption	1.8 A or less (including communication unit and output load)
Environmental resistance	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85% RH (No condensation)
Material		Main unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA, Ethernet connector: Copper alloy + Ni plating, Main unit rear heat sink: Aluminum, Main unit rear DIN rail fixing tab: POM, Nameplate: PC
Weight		Approx. 330 g
^1 Color type only. ^2 Monochrome type only. ^3 Tools can be installed by programs. ^4 Saves to the sensor amplifier’s internal memory. The images saved to the sensor amplifier can be backed up to a USB memory stick inserted into the control panel (IV2-CP50) or to the PC where the software for the IV2 Series (IV2-H1) is being used. ^5 Learning mode only. ^6 Can also be displayed on the control panel (IV2-CP50) or the software for the IV2 Series (IV2-H1). ^7 Usable on the software for the IV2 Series (IV2-H1). ^8 When a communication unit (DL Series) is connected. ^*9 Use only products recommended by KEYENCE.

Keyence KV-N24AT Keyence

10,426.00 kr

Only 6 units left

Specifications

Model				KV-N24AT
General specifications	Power voltage			100 to 240 VAC (+10%/-15%)
	Operating ambient temperature			0 to 55°C 32 to 131°F (no freezing)^1^2
	Operating ambient humidity			5 to 95% RH (no condensation)^*1
	Operating environment			As little dust and corrosive gas as possible
	Noise immunity			1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
	Withstand voltage			1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
	Insulation resistance			50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
	Output power supply voltage			24 VDC (±10%; output capacity: 0.6 A)
	Storage temperature			−25 to +75°C −13 to +167°F
	Vibration resistance	Intermittent vibration	Frequency: 5 to 9 Hz	Amplitude: 3.5 mm 0.14"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 9.8 m/s² 32.2'/s²^3^4
		Continuous vibration	Frequency: 5 to 9 Hz	Amplitude: 1.75 mm 0.07"^3^4
			Frequency: 9 to 150 Hz	Acceleration: 4.9 m/s² 16.1'/s²^3^4
	Shock resistance			Acceleration: 150 m/s² 492.1'/s², application time: 11 ms, three times in each of the X, Y, and Z directions
	Operating altitude			2000 m 6561.7' or less
	Overvoltage category			AC: II, DC: I
	Pollution degree			2
Performance specifications	Calculation control method			Program storage method
	I/O control method			Refresh method
	Program language			Expanded ladder, KV Script, mnemonic
	Number of instructions			Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions
	Instruction execution speed			Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum
	Program capacity			8k steps
	Maximum number of attachable I/O units			8
	Maximum number of I/O points			256 (excluding the base unit I/O)
	Input relay/Output relay/Internal auxiliary relay	R		Total of 9600 points 1 bit (R000 to R59915)
	Link relay	B		8192 points 1 bit (B0 to B1FFF)
	Internal auxiliary relay	MR		9600 points 1 bit (MR000 to MR59915)
	Latch relay	LR		3200 points 1 bit (LR000 to LR19915)
	Control relay	CR		1440 points 1 bit (CR000 to CR8915)
	Timer	T		512 points 32 bit (T0 to T511)
	Counter	C		256 points 32 bit (C0 to C255)
	Data memory	DM		32768 points 16 bit (DM0 to DM32767)
	Link register	W		16384 points 16 bit (W0 to W3FFF)
	Temporary memory	TM		512 points 16 bit (TM0 to TM511)
	High-speed counter	CTH		2 points (CTH0 to CTH1) 32-bit automatic reset counter^5(Input response: 100 kHz per single phase, 50 kHz per phase difference)^6
	High-speed counter comparator	CTC		4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter
	Index register	Z		12 points 32 bit (Z01 to Z12)
	Control memory	CM		9000 points 16 bit (CM0 to CM8999)
	Positioning pulse output			2 axes Maximum output frequency: 100 kHz
	Base unit I/O			Input: 14 points, output: 10 points Input common: 1 point Output common: 1 point
	Number of comments and labels that can be stored in the main unit	Device comment		20000 When a maximum-length ladder program is written with no labels.
		Label		28000 When a maximum-length ladder program is written with no device comments.
	Power off hold function	Program memory		Flash ROM can be rewritten 10000 times
		Device		Nonvolatile RAM^*7
	Self-diagnosis function			CPU error, RAM error, and other problems
Input specifications	Relay number			General input: R000 to R003, R008 to R013 (10 points) High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total)
	Input mode			24 VDC input (open collector)
	Maximum input voltage			26.4 VDC
	Rated input voltage			24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA^*8)
	Minimum ON voltage			19 VDC
	Maximum OFF current			1.5 mA
	Common method			General input: All points/1 common (1 terminal) High-speed A-phase and B-phase input: Shared common for all points (shared with general input)
	Circuit delay time			General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) ^*9
	Input time constant			Normal: 10 ms, When the HSP instruction is used: 10 µs When CR2305 is turned ON: 10 µs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.^*9
				Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms
	Response frequency			(High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50%
Output specifications	Relay number			General output: R504 to R509 (6 points), High-speed output: R500 to R503 (4 points)
	Output mode			MOSFET ^*10
	Rated load			30 VDC, 0.5 A
	Maximum OFF voltage			30 VDC
	Leakage current at OFF			100 μA or less
	Residual voltage at ON			0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output)
	Common method			8 to 10 points/1 common
	ON/OFF response time			General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load)
	Overcurrent protection			Protection provided for each common^*11
	Output frequency			High-speed output: 100 kHz (7 to 100 mA load)
Built-in serial port	Interface	Communication standard		RS-232C
		Connection		Modular connector
	Transmission specifications RS-232C	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
		Transmission method		Full duplex
		Data format	Start bit	1 bit
			Data bits	7 bits, 8 bits
			Stop bits	1 bit, 2 bits
		Error detection	Parity	Even, odd, none
		Transmission distance		15 m 49.2'
		Number of transmission units		1
	Indication			SD (green), RD (red)
Internal current consumption				76 VA (* The VA values are calculated with a power factor of 30%.)
Weight				Approx. 470 g
^1 The range guaranteed as a system (excluding items specially noted for the units and cassettes). ^2 The temperature below the unit center (30 mm 1.18") inside a control panel. ^3 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly. ^4 Conforms to JIS B 3502 and IEC61131-2, Scan times: 10 times (100 minutes) in each of the X, Y, and Z directions ^5 You can also configure the settings so that automatic reset is not used. ^6 Only open collectors are supported. Line drivers are not supported. ^7 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO. ^8 Reference value of input current. ^9 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter) Example: Maximum response time when the input time constant is set to 500 μs OFF to ON: 30 μs (circuit delay) + 400 μs (digital filter) = 430 μs ON to OFF: 50 μs (circuit delay) + 400 μs (digital filter) = 450 μs ^10 MOSFET (N-ch) output for the sink output type. ^*11 If an overcurrent occurs, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common until the cause of the problem is removed.

Keyence OP-87326 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PT-A170 Keyence

7,079.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.