LI2Y 2X0,75ST + 2X (2X0,34ST) -CY SPECIAL CABLE, with BLUE SHEATH CONNECTION OF JB JUNCTION and DISTRIBUTION BOX IN AN AREA SUBJECT TO EXPLOSION HAZARDS and IB INTERMEDIATE BOX FOR PERMANENT ON-SITE INSTALLATION OCCASIONAL BENDING POSSIBLE, APPROX. 10.8 MM OUTER DIAMETER, AMBIENT TEMPERATURE -40 TO +80 CEL. CABLE CUT TO LENGTH, WITHOUT CONNECTOR. 1 PIECE = 1 METER
SIMATIC S7-400, TERMINATOR FOR RECEIVER IM461-3 INTERFACE MODULE
SIMATIC S7, Y coupler for setting up a Y-Link for redundant controllers
COMMUNICATION PROCESSOR CP 1243-7 LTE EU FOR CONNECTION OF SIMATIC S7-1200 TO LTE NET WITH EUROP. FREQ.
CP 1242-7 V2 CommunicationS Processor FOR CONNECTING Simatic S7-1200 TO GSM/GPRS NETWORK; WEB SERVER ACCESS TO CPU, DATA POINT CONFIGURING, PLEASE NOTE NATIONAL APPROVALS!
SIMATIC S7-400, CP 441-2 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 2 CHANNELS
SIMATIC S7-400, interface module IF963-RS232 with RS232 interface for PTP coupling with CP441
SIPLUS S7-1200 CM1241 RS-485 for medial exposure with conformal coating based on 6ES7241-1CH30-0XB0 . Communication module CM 1241, RS485, 9-pole D-sub (pin), supports Freeport
Link module Electrical and mechanical for 3RV1.1 and 3RT101, 3RW301 AC and DC operation (individual unit packaging) !!! Phased-out product !!! Successor is SIRIUS 3RA1 Preferred successor type is >>3RA1921-1DA00<< Notes Sucessor:The successor is 3RA1921-1DA00
SIMATIC S7, TS adapter II for SIMATIC Teleservice RS232 and integrated analog modem; connection to MPI/DP power supply MPI or external 24 V; parameter assignment via USB
Communications processor CP 1242-7 for connection of SIMATIC S7-1200 to GSM/GPRS network Observe national approvals
SIMATIC S7-1200, EMS400S, Power Signal BOOSTER PSB-S, 6xDI, 24 V DC, 1x DI, 24 V DC sync, 3x rail signal 48 V DC
SIPLUS S7-1200 CM 1241, WITH CONFORMAL COATING BASEDON 6ES7241-1AH32-0XB0 . COMMUNICATION MODULE RS232, 9-POL. SUB D (STIFT), ASSISTED FREEPORT
SIMATIC NET CP 1413 Communications Processor Module, ISA Card, 1 x ITP Ethernet Interface Port, supports Windows Based Operating Systems
SIMATIC S7, TS ADAPTER 5.2 FOR SIMATIC TELESERVICE FOR S7-399/-400, M7, C7 WITH RS 232/RS 485 CONVERSION PRODUCT PACKAGE W/O RS232 CABLE
COMPACT SWITCH MODULE CSM 1277 CONNECTION SIMATIC S7-1200 AND UP TO 3 FURTHER IND. ETHERNET USERS WITH 10/100 MBIT/S UNMANAGED SWITCH, 4 RJ45 PORTS, EXT. 24V DC POWER SUPPLY, LED DIAGNOSTICS, S7-1200 MODULE INCL. ELECTRONIC MANUAL ON CD
Breaker VLCable max. FLEX 120 D/F-FR Notes Sucessor:Successor portfolio 3VA; further information via www.siemens.com/3VA
SIMATIC S7-400, IM cable with PS transfer, without C bus, 0.75 m
COMMUNICATION PROCESSOR CP 1243-1 DNP3 FOR CONNECTING OF SIMATIC S7-1200 TO CONTROL CENTER WITH DNP3 PROTOCOL
Communications processor CP 442-1 RNA 1x 10/100 Mbit/s RJ45 port: ISO; S7-, H communication, Open communication (SEND/RECEIVE); S7 routing. 2x 100 Mbit/s, RJ45 port: PRP; ISO; ISO-on-TCP; TCP; UDP S7-, H communication, Open Communication (SEND/RECEIVE); S7 routing; Time synchronization IP Access Control List; Web diagnostics; SNMPV1
SIMATIC NET, CP 443-1 COMMUNICATIONS PROCESSOR FOR CONNECTION OF A SIMATIC S7-400 W. IND.ETHERNET VIA TCP/IP AND ISO, S7 COMM., FETCH / WRITE, SEND/RECEIVE W. OR WITHOUT RFC