PB OLM/G12-1300 V4.0 OPTICAL LINK Module with 1 RS485 and 2 GLASS-FOC-INTERFACES (4 BFOC-SOCKETS),1300NM WAVE LENGTH FOR GREAT DISTANCES with SIGNAL. CONTACT and MEASURING OUTPUT
Signal cable pre-assembled for incremental encoder TTL S-1 3X2X0.2+2X2X0.25C MOTION-CONNECT 300 No UL for connector on the motor side Dmax=7.2 mm Length (m)=15 m Version with straight connector Mot
SIPLUS S7-1200 CM1241 RS232 -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7241-1AH32-0XB0 . COMMUNICATION MODULE RS232, 9 PIN SUB D (FEMALE), SUPPORTS MESSAGE BASED FREEPORT
SIMATIC S7-1200, Communication module CM 1241, RS232, 9-pole D-sub (pin), supports Freeport
SIPLUS S7-1200 CM1241 -40 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7241-1CH32-0XB0 . COMMUNICATION MODULE CM 1241 RS422/485, 9 PIN SUB D(MALE) SUPPORTS MESSAGE BASED FREEPORT
SIMATIC S7-400, IM460-3 TRANSMITTER INTERFACE MODULE, FOR DISTRIBUTED CONNECTION UP TO 102 M, WITH K BUS
SIMATIC S7-1200, Communication module CM 1241, RS-422/485,9 POL Sub-D (socket) supports Freeport
SIMATIC S7-400, CP 441-1 COMMUNICATIONS MODULE FOR POINT TO POINT CONNECTIONS 1 CHANNEL INCL. CONFIG. PACKAGE ON CD
SIPLUS S7-1200 CB 1241, -25 ... +60 GRAD C WITH CONFORMAL COATING BASED ON 6ES7241-1CH30-1XB0 RS485
SIMATIC S7-400, Communication expansion EXM 448 for FM 458 Use as DP master with parameterization SW "COM-PROFIBUS" (compatible operating system versions to be observed)
SIMATIC S7-1200, CM 1243-2 communication module AS-Interface master according to AS-i specification V3.0
LI2Y 2X0,75ST + 2 (2X0,34ST) - CY, SHEATH ORANGE, SPECIAL CABLE FOR CONNECTION SIWAREX Module TO JB JUNCTION BOX and DISTRIBUTION BOX OR IB INTER- MEDIATE BOX AS WELL AS BETWEEN TWO IB'S FOR PERMANENT ON-SITE INSTALLATION;OCCASIONAL BENDING POSSIBLE. 10.8 MM OUTER DIAMETER AMBIENT TEMPERATURE -40 TO +80 CEL. CABLE CUT TO LENGTH, WITHOUT CONNECTOR. 1 PIECE = 1 METER
Communication module CM 1242-5; for connection of SIMATIC S7-1200 to PROFIBUS as DP Slave module
SIMATIC S7-400, IM CABLE WITH K BUS, 5 M
SIPLUS S7-1200 CP 1243-1 -40...+70°C with conformal coating based on 6GK7243-1BX30-0XE0 . Communications Processor CP 1243-1 for connecting SIMATIC S7-1200 as additional Ethernet interface and for connection to control center via remote system protocols (DNP3, IEC 60870, TeleControl Basic), Security (Firewall, VPN)
RFID communication module RF120C for SIMATIC S7-1200; 1 reader connectable; RS-422
SIMATIC S7-1200, EXPANSION CABLE TWO-ROW ARRANGEMENT FOR SM 12XX, 2.0 M
SIMATIC S7-1200, DCM 1271 Data decoupling module for AS-i Master CM 1243-2 IN: 24 V / 30 V DC OUT: 1x AS-Interface, 4 A Integrated overload protection integr. ground fault detection Signaling contact
COMMUNICATIONS PROCESSOR CP 1243-1 IEC FOR CONNECTING SIMATIC S7-1200 TO CONTROL CENTER W. PROTOCOL IEC60870-5-104
INTERFACE Module TPM478-2 FOR CONNECTION OF TELEPERM M I/O- Modules TO PCS7-AUTOMATION Systems