Buy Best selling products Industrial Automation Parts

10,482.00 kr

Only 3 units left

Buy the Bosch Rexroth R900773022 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R900773022 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence PR-F51N1 Keyence

3,231.00 kr

Only 1 unit left

Specifications

Model		PR-F51N1
Type		Thrubeam
Output		NPN
Shape		Flat
Cable connection		1 m cable
Detection distance		0.6 m
Number of control outputs		2 outputs
Output operation	Output 1	Dark-ON
	Output 2	Light-ON
Response time	Output 1	0.5 ms
	Output 2	ON→OFF: 2.7 ms, OFF→ON: 0.5 ms
Sensitivity adjustment		None
Spot diameter		-
Light source		4 element, point light source, red LED (650 nm)
Mutual interference prevention function		-
Indicator lamp		Output indicator (orange), stable operation indicator (green), thrubeam type transmitter: power supply indicator (green)
Control output		30 VDC or lower, 50 mA or lower Leakage current: When 3 kΩ load resistance, 0.3 mA or lower. When 1 kΩ load resistance, 0.5 mA or lower. When 0.2 kΩ load resistance, 1.5 mA or lower Residual voltage: When 10 mA or lower, 1.0 V or lower. When 10 to 30 mA, 1.5 V or lower. When 30 to 50 mA, 2.0 V or lower.
Protection circuit		Power supply reverse connection protection, output overcurrent protection, output surge protection, power supply surge protection
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Current consumption	Transmitter: 11 mA, Receiver: 16 mA
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP69K (DIN40050-9), 4X, 6P, 13 (NEMA250)
	Insulation resistance	20 MΩ or higher (500 VDC)
	Ambient light	Incandescent lamp: 5,000 lux or lower, Sunlight: 20,000 lux or lower
	Ambient temperature	-25 to +55 °C -13 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, indicator cover/lens cover: polysulfone, cord protector: polymethylpentene, filler: polyester-based resin
Accessories		Instruction manual
Weight		Approx. 36 g

Rexroth R911299523 Rexroth

13,040.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider CAD323BD Schneider Electric

3,124.00 kr

Only 1 unit left

TeSys D control relay - 3 NO + 2 NC - <= 690 V - 24 V DC standard coil

ABB 2CCF544310E0630 ABB - F404A-K63/0.03

8,478.00 kr

Only 1 unit left

ABB EcoSolutions

Environmental Product Declaration - EPD:

Environment Product Declaration F404

Technical

Type of Residual Current:

Type F APR

Rated Operational Current (I_e):

63 A

Rated Service Short-Circuit Breaking Capacity (I_cs):

1 kA

Maximum Surge Current:

0.25 kA

Leakage Current Type:

A

Number of Poles:

4P

Operating Characteristic:

Instantaneous (APR High Immunity)

Position of Neutral Terminals:

Right

Accessories Available:

Yes

Rated Cross-Section:

1 - Solid-Core 0...25 mm²

4 - Multi-Wired 0...25 mm²

1 - Solid-Core 0...25 mm²

4 - Multi-Wired 0...25 mm²

Electrical

Short-Circuit Current Rating (SCCR):

0.03 A

Rated Voltage (U_r):

230 / 400 V

Rated Operational Voltage:

230 ... 400 V AC

Rated Insulation Voltage (U_i):

500 V

Rated Impulse Withstand Voltage (U_imp):

4 kV

Input Voltage Type:

AC

Rated Current (I_n):

63 A

Rated Residual Current:

30 mA

Rated Frequency (f):

50 ... 60 Hz

Power Loss:

3.2 W

Material Compliance

RoHS Information:

CE Declaration of conformity - CE Konformitätserklärung - F404, F402, F454, F452

RoHS Status:

Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

RoHS Date:

20210225

REACH Declaration:

REACH Declaration of conformity - SMISSLINE

REACH Information:

True - contains substances > 0.1 mass percentage

REACH Date:

20230417

Conflict Minerals Reporting Template (CMRT):

Conflict Minerals Reporting Template

WEEE Category:

5. Small Equipment (No External Dimension More Than 50 cm)

WEEE B2C / B2B:

Business To Business

Environmental

Ambient Temperature:

-25...55 °C

Ambient Air Temperature:

Operation -25...55 °C

Degree of Protection:

IP20

Pollution Degree:

2

Environmental Information:

REACH Declaration of conformity - SMISSLINE

Dimensions

Width in Number of Modular Spacings:

4

Product Net Width:

72 mm

Product Net Height:

91 mm

Product Net Depth / Length:

75 mm

Product Net Weight:

430 g

Built-In Depth (t₂):

69 mm

Dimension Diagram:

A_ELSB_Cat_2024_09_Plug-in systems SMISSLINE

Engineering

EPLAN Data:

EPLAN EDZ F404

Ordering

Package Level 1 Units:

carton 1 piece

Package Level 1 Gross Weight:

490 g

E-Number (Norway):

1623579

E-Number (Switzerland):

531443205

Certificates and Declarations

Declaration of Conformity - CE:

CE Declaration of conformity - CE Konformitätserklärung - F404, F402, F454, F452

Installation

Instructions and Manuals:

SMISSLINE TP Mounting instruction RCCB F404

Mounting Type:

Plug-In

Popular Downloads

Data Sheet, Technical Information:

A_ELSB_Cat_2024_09_Plug-in systems SMISSLINE

External Classifications and Standards

ETIM 9:

EC000003 - Residual current circuit breaker (RCCB)

ETIM 10:

EC000003 - Residual current circuit breaker (RCCB)

eClass:

V11.0 : 27142201

Object Classification Code:

FB

Standards:

IEC/EN 61008

ABB 1SVR440721R0000 ABB - CL-LER.18DC2

8,710.00 kr

Only 1 unit left

CPU logic module and inputs / outputs. CL-LER.18DC2 Mod. Of expansion 24V c.c. with 12 digital inputs and 6 relay outputs expansion outputs / outputs

Schneider ATV31HD11N4A Schneider

20,508.00 kr

Only 2 units left

Main

Characteristic	Value(s)
Range of Product	Altivar
Product or Component Type	Variable speed drive
Product Specific Application	Simple machine
Component name	ATV31
Assembly style	With heat sink
Variant	With drive order potentiometer
EMC filter	Integrated
[Us] rated supply voltage	380...500 V - 5...5 %
Supply frequency	50...60 Hz - 5...5 %
Phase	3 phase
Motor power kW	11 kW 4 kHz
Maximum Horse Power Rating	15 hp 4 kHz
Line current	28.4 A 500 V 37.2 A 380 V, Isc = 1 kA
Apparent power	25 kVA
Prospective line Isc	1 kA
Nominal output current	27.7 A 4 kHz
Maximum transient current	41.6 A 60 s
Power dissipation in W	397 W at nominal load
Asynchronous motor control profile	Sensorless flux vector control with PWM type motor control signal Factory set : constant torque
Analogue input number	4

Complementary

Characteristic	Value(s)
Product destination	Asynchronous motors
Supply voltage limits	323â¦550 V
Network Frequency	47.5...63 Hz
Output frequency	0.0005â¦0.5 kHz
Nominal switching frequency	4 kHz
Switching frequency	2...16 kHz adjustable
Speed range	1â¦50
Transient overtorque	150â¦170 % of nominal motor torque
Braking torque	<= 150 % 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor
Regulation loop	Frequency PI regulator
Motor slip compensation	Suppressable Adjustable Automatic whatever the load
Output voltage	<= power supply voltage
Electrical connection	Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.004 inÂ² (2.5 mmÂ²) AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.004 inÂ² (2.5 mmÂ²) AWG 14
Tightening torque	Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.3 lbf.in (0.6 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 7.08 lbf.in (0.8 N.m)
Insulation	Electrical between power and control
Supply	Internal supply for logic inputs 19...30 V 100 mA overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V 10 mA overload and short-circuit protection
Analogue input type	AI3 configurable current 0...20 mA 250 Ohm AI1 configurable voltage 0...10 V 30 V max 30000 Ohm AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm AIP potentiometer reference 8 ms 10 bits +/- 4.3 % +/- 0.2 %
Sampling duration	LI1...LI6 4 ms discrete AI1, AI2, AI3 8 ms analog
Response time	AOV, AOC 8 ms analog R1A, R1B, R1C, R2A, R2B 8 ms discrete
Linearity error	+/- 0.2 % output
Analogue output number	2
Analogue output type	AOC configurable current 0...20 mA 800 Ohm 8 bits AOV configurable voltage 0...10 V 470 Ohm 8 bits
Discrete input logic	Positive logic (source) LI1...LI6), < 5 V, > 11 V Logic input not wired LI1...LI4), < 13 V Negative logic (source) LI1...LI6), > 19 V
Discrete output number	2
Discrete output type	Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic R2A, R2B) NC - 100000 cycles
Minimum switching current	R1-R2 10 mA 5 V DC
Maximum switching current	R1-R2 2 A 250 V AC inductive, cos phi = 0.4 7 ms R1-R2 2 A 30 V DC inductive, cos phi = 0.4 7 ms R1-R2 5 A 250 V AC resistive, cos phi = 1 0 ms R1-R2 5 A 30 V DC resistive, cos phi = 1 0 ms
Discrete input number	6
Discrete input type	LI1...LI6) programmable 24 V, 0â¦100 mA PLC 3500 Ohm
Acceleration and deceleration ramps	S, U or customized Linear adjustable separately from 0.1 to 999.9 s
Braking to standstill	By DC injection
Protection type	Input phase breaks drive Line supply overvoltage and undervoltage safety circuits drive Line supply phase loss safety function, for three phases supply drive Motor phase breaks drive Overcurrent between output phases and earth (on power up only) drive Overheating protection drive Short-circuit between motor phases drive Thermal protection motor
Insulation resistance	>= 500 mOhm 500 V DC for 1 minute
Display type	1 LED Red)drive voltage Four 7-segment display unitsCANopen bus status
Time constant	5 ms for reference change
Frequency resolution	Display unit 0.1 Hz Analog input 0.1...100 Hz
Connector type	1 RJ45 CANopen via VW3 CANTAP2 adaptor 1 RJ45 Modbus
Physical interface	RS485 multidrop serial link CANopen via VW3 CANTAP2 adaptor RS485 multidrop serial link Modbus
Transmission frame	RTU CANopen via VW3 CANTAP2 adaptor RTU Modbus
Transmission Rate	10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor 4800, 9600 or 19200 bps Modbus
Number of addresses	1â¦127 CANopen via VW3 CANTAP2 adaptor 1â¦247 Modbus
Number of drive	127 CANopen via VW3 CANTAP2 adaptor 31 Modbus
Marking	CE
Operating position	Vertical +/- 10 degree
Product Weight	24.3 lb(US) (11 kg)

Rexroth R911295888 Rexroth

34,995.00 kr

Only 3 units left

Buy the Bosch Rexroth R911295888 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R911295888 is a direct drop-in replacement for existing installations and ships ready for integration.

ABB 2TLA030053R2600 ABB - Smile 12 RF M12-5

4,739.00 kr

Only 1 unit left

Ordering

Minimum Order Quantity:

1 piece

Customs Tariff Number:

85365011

Product Main Type:

Smile

Product Name:

Reset button

Popular Downloads

Data Sheet, Technical Information:

ABB Safety Products catalog

Data Sheet, Technical Information (Part 2):

2TLC010097D0201

CAD Dimensional Drawing:

Information - 2D and 3D files for CAD systems

Marketing Video:

ABB Safety Products - Your best partner for machine safety

Dimensions

Product Net Depth / Length:

36 mm

Product Net Height:

109 mm

Product Net Width:

40 mm

Product Net Weight:

0.06 kg

Technical

Suitable For:

Adam DYN-Reset M12-5

Adam OSSD-Reset M12-5

Adam DYN-Reset M12-5

Adam OSSD-Reset M12-5

Material Compliance

Conflict Minerals Reporting Template (CMRT):

CMRT - Conflict Minerals Reporting Template

REACH Declaration:

REACh - Safety Products

RoHS Information:

RoHS - Safety Products

RoHS Status:

Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019

Toxic Substances Control Act - TSCA:

Toxic Substances Control Act (TSCA) declaration for Safety Products

WEEE B2C / B2B:

Business To Business

WEEE Category:

5. Small Equipment (No External Dimension More Than 50 cm)

Certificates and Declarations

CSA Certificate:

CSA certificate - Inca, Inca Tina, Smile, Smile Tina

Container Information

Package Level 1 Units:

box 1 piece

Package Level 1 Width:

150 mm

Package Level 1 Depth / Length:

55 mm

Package Level 1 Height:

78 mm

Package Level 1 Gross Weight:

0.16 kg

Package Level 1 EAN:

7350024479584

External Classifications and Standards

eClass:

V11.0 : 27371228

ETIM 7:

EC000225 - Control circuit devices combination in enclosure

ETIM 8:

EC000225 - Control circuit devices combination in enclosure

ETIM 9:

EC001028 - Push button, complete

IDEA Granular Category Code (IGCC):

4773 >> Emergency stop device

UNSPSC:

39121545

Object Classification Code:

B

E-Number (Sweden):

3705103

Keyence MD-V9920FA Keyence

186,977.00 kr

Only 3 units left

Buy the Keyence MD-V9920FA Laser System - an industrial laser for marking, engraving, or measurement. Features precision optics, programmable operation, and industrial construction. The Keyence MD-V9920FA is a direct replacement for existing installations.

Rexroth FWA-CML45 Rexroth

19,116.00 kr

Only 3 units left

Buy the Bosch Rexroth FWA-CML45 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth FWA-CML45 is a direct drop-in replacement for existing installations and ships ready for integration.

Rexroth R911286619 Rexroth

39,247.00 kr

Only 3 units left

Buy the Bosch Rexroth R911286619 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R911286619 is a direct drop-in replacement for existing installations and ships ready for integration.

ABB 1SFA897112R7000 ABB - PSE210-600-70

71,517.00 kr

Only 1 unit left

Soft Starter 230V/45kW, 400V/90kW, 500V/110kW, 171A

Rexroth R901164571 Rexroth

39,057.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Schneider BMI1003P36A Schneider

33,932.00 kr

Only 1 unit left

Main

Characteristic	Value(s)
Range Compatibility	Lexium 32i
Device short name	BMI
Product or Component Type	Servo motor with power stage

Complementary

Characteristic	Value(s)
Maximum mechanical speed	6000 rpm
[Us] rated supply voltage	208...480 V - 15...10 %
Supply voltage limits	208â¦480 V
Phase	Three phase
Supply frequency	50/60 Hz - 5...5 %
Network frequency limits	47.5â¦63 Hz
EMC filter	Integrated
Continuous output current	4 A 8 kHz
Output current 3s peak	12 A 400 V 3 s
Continuous stall current	4 A
Continuous stall torque	75.2 lbf.in (8.5 N.m) 208...480 V three phase
Peak stall torque	169.9 lbf.in (19.2 N.m) 400 V three phase 169.9 lbf.in (19.2 N.m) 480 V three phase 169.9 lbf.in (19.2 N.m) 208 V three phase
Nominal output power	1000 W 208 V three phase 2000 W 400 V three phase 2100 W 480 V three phase
Nominal torque	63.7 lbf.in (7.2 N.m) 208 V three phase 60.2 lbf.in (6.8 N.m) 400 V three phase 49.6 lbf.in (5.6 N.m) 480 V three phase
Nominal speed	1500 rpm 208 V three phase 3000 rpm 400 V three phase 3700 rpm 480 V three phase
Maximum current Irms	26.7 A 208 V, three phase 26.7 A 400 V, three phase 26.7 A 480 V, three phase
Product compatibility	Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
Shaft end	Keyed
Second shaft	Without second shaft end
Shaft diameter	0.7 in (19 mm)
Shaft length	1.6 in (40 mm)
key width	0.2 in (6 mm)
Feedback type	Absolute single turn SinCos Hiperface
Speed feedback resolution	32768 points/turn
Holding brake	Without
Mounting Support	International standard flange
Motor flange size	3.9 in (100 mm)
Electrical Connection	Printed circuit board connector
Torque constant	1.7 N.m/A 68 Â°F (20 Â°C)
Back emf constant	112 V/krpm 68 Â°F (20 Â°C)
Number of motor poles	10
Rotor inertia	9.37 kg.cmÂ²
Stator resistance	2.31 Ohm 68 Â°F (20 Â°C)
Stator inductance	11.43 mH 68 Â°F (20 Â°C)
Stator electrical time constant	4.95 ms 68 Â°F (20 Â°C)
Maximum radial force Fr	1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm
Maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
Length	11.8 in (299 mm)
Number of motor stacks	3
Centring collar diameter	3.7 in (95 mm)
centring collar depth	0.1 in (3.5 mm)
Number of mounting holes	4
Mounting holes diameter	0.4 in (9 mm)
Circle diameter of the mounting holes	4.5 in (115 mm)
Distance shaft shoulder-flange	0.1 in (3.5 mm)

Yaskawa SGDV-120D21A Yaskawa

21,187.00 kr

Only 1 unit left

The SGDV120D21A is a high-efficiency three-phase servo motor from the SIGMA V series, operating at 400V and delivering a robust power output of 3.0KW. It features MECHATROLINK III communication for seamless integration into automation systems, optimizing data transfer and ensuring responsive performance for demanding applications. This model is engineered for precision in motion control, making it an excellent choice for advanced industrial environments.

Yaskawa JZNC-MRK11-2E Yaskawa

6,986.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Rexroth R055721379 Rexroth

72,336.00 kr

Only 3 units left

Buy the Bosch Rexroth R055721379 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R055721379 is a direct drop-in replacement for existing installations and ships ready for integration.

Rexroth R911282659 Rexroth

99,142.00 kr

Only 3 units left

Buy the Bosch Rexroth R911282659 - a genuine Bosch Rexroth industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Bosch Rexroth R911282659 is a direct drop-in replacement for existing installations and ships ready for integration.

ABB 1SBL331201R8400 ABB

3,336.00 kr

Only 3 units left

Buy the ABB 1SBL331201R8400 - a genuine ABB industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The ABB 1SBL331201R8400 is a direct drop-in replacement for existing installations and ships ready for integration.