Bus base with one expansion slot
The bus module has an expansion slot. The following modules are used on this module:
Base module (BC, HB, etc.)
Add-on module (IF, HB, etc.)
Supply module
The left and right end cover plates are included in delivery.
Bus base
The following modules are used on the bus module:
Base module (BC, HB, etc.)
Supply module
The left and right end cover plates are included in delivery.
Base for all X20 Compact CPUs
RS232 connection
CAN bus connection
Integrated terminating resistor for CAN bus
The bus module is the base for all X20 Compact CPUs.
The left and right end cover plates are included in delivery.
2 inputs for resistance temperature measurement
PT100 sensor
Direct resistance measurement
4-wire measurement
Configurable filter time
2 inputs for resistance temperature measurement
For PT100 and PT1000
Configurable sensor type per channel
Direct resistance measurement
Configurable 2- or 3- wire connections per module
Configurable filter time
The module is equipped with 2 inputs for PT100/PT1000 resistance temperature measurement.
This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
4 analog outputs
Either current or voltage signal possible
16-bit digital converter resolution
The module is equipped with 4 outputs with 16-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.
X20 analog output module, 4 outputs, 10 V or 0 to 20 mA / 4 to 20 mA, 13-bit converter resolution
2 analog current outputs
Electrically isolated analog channels
16-bit digital converter resolution
The module is equipped with 2 current outputs with 16-bit digital converter resolution. The 2 channels are electrically isolated from each other. The user can select between the 3 output ranges 4 to 20 mA, 0 to 20 mA and 0 to 24 mA.
8 analog inputs, 0 to 20 mA or 4 to 20 mA
12-bit digital converter resolution
The module is equipped with 8 inputs with 12-bit digital converter resolution. It is possible to select between the two current ranges 0 to 20 mA and 4 to 20 mA.
2 analog inputs
Either current or voltage signal possible
13-bit digital converter resolution
The module is equipped with 2 inputs with 13-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.
This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
1 full-bridge strain gauge input
Data output rate configurable from 0.1 Hz to 7.5 kHz
Special operating modes (synchronous mode and multiple sampling)
Configurable filter level
INPUT MODULE, 2 ANOLOG, 16 BIT, DIGITAL, FOR-X20 6 PIN TERMINAL BLOCKS
The A1000 is the premium AC drive from Yaskawa. It provides great operation reliability, environmental benefits, and energy savings as well as many other user-oriented operational features that make it a first-class choice.
Encoderless operation of PM motors with full torque at zero speed
Advanced Auto-Tuning functions to adjust automatically motor settings and analyze continuously changes during motor operation to achieve the highest machine performance
Advanced energy-saving control technology which improves efficiency and machine productivity in combination with induction and synchronous motor operation
Available with special features for a high-speed spindle, positioning, crane and hoist, electronic line shaft
INTERFACE MODULE, PROFINET RT CONTROLLER, FOR USE W/ X20 CPUS / X20 BC 1083 POWERLINK BUS CONTROLLER, 2X SHIELDED RJ45 SWITCH
The module is an IO-Link master that allows intelligent sensors and actuators to be connected to the X20 system in accordance with the IO-Link standard. The module can be used to operate up to 4 IO-Link devices. All IO-Link channels can be used either as standard digital inputs or outputs.
B & R, CPU Module, 24 V dc, 256 MB SDRAM, 1.5 A, USB/EtherNet, 0.6 W
X20AI1744
ANALOG INPUT MODULE
24 VDC
5 KHZ
0.01-0.5 W
24 BIT DIGITAL CONVERTER RESOLUTION
LED INDICATOR
-40 TO +80 DEGREES C
IP20
FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED
X20IF10E31INTERFACE MODULEPROFINET IO INTERFACECAN BE OPERATED IN X20 CPUS / BUS CONTROLLER X20BC10832 RJ45 CONNECTIONS
X20IF10611
INTERFACE MODULE
COMMUNICATION MODULE
1X PROFIBUS DP V0/V1 MASTER
MEMORY 8 MB SDRAM
9-PIN FEMALE DSUB CONNECTOR
ATOM 333MHz Compatible, 128MB DDR2, 1MB SRAM
X20IF10631
INTERFACE MODULE
DP V1 SLAVE
1.8 W
9-PIN FEMALE DSUB CONNECTOR
1200 M MAX DISTANCE
244 BYTES
IP20
FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED
B&R | X20BM05 | BASE MODULE
round pilot light Ø 22 - green - integral LED - 220 V AC - screw clamp terminals
selector switch - Ø22 - standard handle - 3 positions - 2NO