Buy Siemens All Industrial Automation Parts

1,611.00 kr

In stock, 25 units

DC digital input module - Mitsubishi Electric (MELSEC iQ-R Series) - 16I/O [16DI (16 x digital inputs (24Vdc; 0.1-70ms response))] - with screw-clamp term. connections - Backplane / rack mounting

Mitsubishi R60ADI8 Mitsubishi

3,894.00 kr

In stock, 26 units

Analog current input module - Mitsubishi Electric (MELSEC iQ-R Series) - 8I/O [8AI (8 x analog inputs (0-20mA / 4-20mA))] - with screw-clamp term. connections - Backplane / rack mounting

Mitsubishi R08CPU Mitsubishi

12,848.00 kr

In stock, 15 units

Programmable Logic Controller (PLC) CPU unit - Mitsubishi Electric (MELSEC iQ-R Series) - 80Ksteps / 320KBytes (Program) memory capacity - connection capacity 4096 x I/O points max - with USB2.0 connector - with Ethernet communication capability - Supply voltage 5Vdc (from dedicated iQ-R series P.S.U.) - Backplane / rack mounting

Mitsubishi HG-KR13 Mitsubishi

2,909.00 kr

In stock, 44 units

Servomotor Hg Series, Power 100 W; Torque 0.32 Nm, Max. Torque 1.1 Nm

Mitsubishi A1S-Y10 Mitsubishi

1,238.00 kr

In stock, 36 units

Mitsubishi Q Series Input Module, Melsec Ans/Qnas Series Module, 24 V Dc, Din Rail Mount

Mitsubishi AJ65SBTB1-16DT Mitsubishi

1,851.00 kr

In stock, 46 units

Mitsubishi, A Series, Input/Output Module, 8 Input, 8 Output, 1.5 Ms, 118 X 50 X 40 Mm

Mitsubishi HG-SR702K Mitsubishi

23,418.00 kr

In stock, 38 units

SERVO MOTOR 7.0KW 2KRPM W/KEY

Mitsubishi MR-J4-200A Mitsubishi

11,690.00 kr

In stock, 53 units

1-Axis Servo Amplifier, 2.0kw, 1000r/min, IP67

Mitsubishi MR-J2S-350B Mitsubishi

10,964.00 kr

In stock, 15 units

SERVO AMPLIFIER, 3.5 KW, SSCNET BUS CONTROL, 200-230 VAC, 3 PHASE, 16 AMP

Mitsubishi MR-J2S-200A Mitsubishi

6,722.00 kr

In stock, 15 units

SERVO AC AMPLIFIER, 2000 W INPUT, 10.5 AMP, 200-230V / 50/60 HZ, 2 KW, SERVO AMPLIFIER (DIGITAL OR ANALOGUE CONTROL) (200 V 3-PHASE ONLY)

Keyence FS-V31P Keyence

1,407.00 kr

In stock, 12 units

Specifications

Model		FS-V31P
Type		1-output with cable
Output		PNP
Main unit/Expansion unit		Main unit
Control output		1 output
Monitor output (1 to 5 V)		N/A
External input
Connector		―
Light source LED		Red, 4-element LED (Wavelength: 640 nm)
Response time		33 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /16 ms (MEGA TURBO)
Output selection		LIGHT-ON/DARK-ON (switch-selectable)
Display indicator		Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P, Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
Size		30.3 mm (H) x 9.8 mm (W) x 71.8 mm (D) 1.19" (H) x 0.39" (W) x 2.83" (D)
Detection mode		Light intensity (area detection possible, automatic sensitivity-tracking function provided)
Timer function		OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
Control output		PNP open-collector 24 V, 100 mA max.^*1 (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.
External inputy		Input time: 2 ms (ON)/20 ms (OFF) min.^*2
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.
Number of interference prevention units	Normal operation	HIGHSPEED：0 FINE：4 TURBO/SUPER/ULTRA/MEGA：8台
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Power consumption	Normal: 750 mW max. (Using 24 V, 31 mA max., using 12 V, 40 mA max.)/ Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V, 28 mA max.)^*3
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Accessories		N/A
Weight		Approx. 80 g
^1 Total current of two outputs should be less than 100 mA. ^2 Only available on certain models. ^3 When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA). ^4 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 1 to 2 Units: -10 to +55 °C 14 to 131 °F, 3 to 10 Units: -10 to +50 °C 14 to 122 °F, 11 to 16 Units: -10 to +45 °C 14 to 113 °F

Keyence FS-N41C Keyence

2,797.00 kr

In stock, 32 units

Specifications

Model		FS-N41C^*1
Type		M8 Connector^*2
Main unit/expansion unit		Main unit
Response time		23 µs (S-HSPD^3) /50 µs (HSPD^4) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
Number of control outputs		2^*5
Number of external inputs		1^*5
Light source LED		Transmitter side: Red, four-element LED (wavelength: 660 nm)
Control output		Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage NPN 1.4 V or less (output current: 10 mA or less) /2 V or less (output current: 10 to 100 mA) PNP 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
External input		Input time: 2 ms (ON) /20 ms (OFF) or longer^*6
Protection circuit		Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
Mutual interference prevention		S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
Power supply	Power voltage	10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS^*7
	Power consumption	During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)^*8
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lx or less, sunlight: 30,000 lx or less
	Ambient temperature	-20 °C -4 °F to +55 °C +131 °F (no freezing)^*9
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours each for X, Y, and Z axes
	Shock resistance	500 m/s²; 3 times each for X, Y, and Z axes
Case material		Main unit and cover: polycarbonate
Weight		Approx. 25 g
^1 IO-Link Specifi cation V.1.1/COM2 (38.4 kbps) is supported. ^2 Ensure the cable length is 30 m 98.4" or less for the M8 connector type. Ensure the cable length is 20 meters 65.6' or less when connecting by way of IO-Link. ^3 Restrictions when S-HSPD is selected Output 2 of dual output types is fixed to OFF. IO-Link communication cannot be used. Area detection, Area % Mode, DATUM, Rising edge, and Falling edge cannot be selected for Detection Mode. Output timer, Limit Detection, and Display Gain cannot be used. FULL cannot be selected for the ECO function. ^4 Restrictions when HSPD is selected Display Gain cannot be used. ^5 Output 2 and the external input are selectable. ^6 The input time becomes 25 ms (ON)/25 ms (OFF) when external calibration input is selected. ^7 When expanding the system to 9 or more units, use a power supply voltage of 12 V or higher. ^8 The load current is excluded. The power consumption including the load when the maximum number of units are connected is 38 W max. ^*9 When expanded by 1 to 2 units: -20°C -4°F to +55°C +131°F. When expanded by 3 to 10 units: -20°C -4°F to +50°C +122°F. When expanded by 11 to 16 units: -20°C -4°F to +45°C +113°F. When using 2 outputs, 1 unit is counted as 2 units. The prescribed values for the ambient temperature assume that the sensor amplifi er has been mounted on a DIN rail installed on a metal surface. Exercise special care when installing the product in an airtight space.

GE Fanuc IC693CPU374 GE Fanuc

26,510.00 kr

In stock, 20 units

CPU 374 MODULE (240K BYTES CONFIGURABLE USER MEMORY), EMBEDDED ETHERNET 10/100MBS W/BUILT-IN SWITCH. NO SERIAL PORTS, WITHOUT BATTERY

Delta AS16AN01P-A Delta

1,692.00 kr

In stock, 12 units

Basic I/O Module 16 Digital Outputs PNP 24Vdc for Delta AS/AX series. NEW

Delta DVP20SX211R Delta

3,011.00 kr

Only 10 units left

Programmable Logic Controller (PLC) Chassis Mount, DIN Rail 24VDC

Delta DVP14SS211R Delta

1,590.00 kr

Only 6 units left

Programmable Logic Controller (PLC) DIN Rail 24VDC

Delta DVP28SV11S2 Delta

4,019.00 kr

In stock, 12 units

Programmable Logic Controller (PLC) Chassis Mount, DIN Rail 24VDC

Delta DVP-20SX211R Delta

3,011.00 kr

Only 10 units left

PROGRAMMABLE LOGIC CTRL 8-4/6-2R

Delta VFD022E43A Delta

3,110.00 kr

In stock, 11 units

VFD-E, 3HP 460V, MICRO VECTOR DR

Delta VFD1320C43A-00 Delta

52,181.00 kr

Only 5 units left

The C2000 Plus Series features precise speed, torque and position control functions that are suitable for both sensor and sensorless synchronous / asynchronous motors. 460 V – 3 Phase 132 kW – 175 HP – 260 A

Delta VFD220C43A-21 Delta

10,890.00 kr

Only 10 units left

The C2000 Plus Series features precise speed, torque and position control functions that are suitable for both sensor and sensorless synchronous / asynchronous motors. 460 V – 3 Phase 22 kW – 30 HP – 45 Amps

Delta VFD007EL43W Delta

1,935.00 kr

Only 7 units left

Delta’s VFD-EL-W series is the new generation compact vector control drive. Simple, delicate and durable design inherits Delta’s superior drive technology. Various essential functions are built-in as standard, including: Multi-step Operation; Torque Compensation; PID Control; Multi-Pump Control; Water Supply at Constant Pressure; Leakage Detection function and so on. 460 V – 3 Phase 0.75 KW – 1 HP – 2.5 A

Delta VFD004EL21W Delta

1,722.00 kr

In stock, 11 units

Delta’s VFD-EL-W series is the new generation compact vector control drive. Simple, delicate and durable design inherits Delta’s superior drive technology. Various essential functions are built-in as standard, including: Multi-step Operation; Torque Compensation; PID Control; Multi-Pump Control; Water Supply at Constant Pressure; Leakage Detection function and so on. Features Include: Simple Speed Control Horizontal Movement Fixed Load Applications 230 V – 1 Phase 0.4 KW – 0.5 HP – 2.5 A

Beckhoff KL4032 Beckhoff

3,293.00 kr

Only 6 units left

Bus Terminal, 2-channel analog output, voltage, ±10 V, 12 bit, differential