This interface module for Ethernet Modbus/TCP network is part of the range Modicon TM2 I/O expansion modules. This interface module incorporates 20 inputs / outputs: 12 inputs and 8 outputs. Its supply voltage is 24V dc. It enables data exchange between a control source (PLC, variable speed drives, PC) and the inputs and outputs. It complies with Magelis HMI controller XBTGC and Drive controllers Altivar IMC (with Altivar 61 / Altivar 71). It is equipped with a removable screw terminal block, and can be mounted on a symmetrical DIN rail 35mm.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon OTB |
| Product or Component Type | I/O distributed module |
| Integrated connection type | Ethernet TCP/IP RJ45 1 twisted pair 10/100 Mbit/s transparent ready class A10 |
| Discrete input number | 12 EN/IEC 61131 type 1 |
| Discrete input logic | Sink or source |
| Discrete input current | 5 mA I0...I1 5 mA I6...I7 7 mA I2...I5 7 mA I8...I11 |
| Discrete output number | 2 solid state PNP Q0...Q1 source 6 relay Q2...Q7 |
| Discrete output current | 2000 mA relay 300 mA solid state |
Complementary
| Characteristic | Value(s) |
|---|---|
| Concept | Transparent Ready |
| Port Ethernet | 10BASE-T/10BASE-TX |
| Bus length | 0.0000000000â¦328.08 ft (0â¦100 m), copper |
| Number of devices per segment | 0â¦256 |
| Communication Service | Modbus messaging |
| Web services | No standard Web server |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete input type | NPN or PNP |
| Input voltage limits | 20.4...26.4 V |
| Electronic filtering time | 0.035 ms I0...I1 at state 1 0.035 ms I6...I7 at state 1 0.04 ms I2...I5 at state 1 0.04 ms I8...I11 at state 1 0.045 ms I0...I1 at state 0 0.045 ms I6...I7 at state 0 0.15 ms I2...I5 at state 0 0.15 ms I8...I11 at state 0 |
| Configurable filtering time | 0 ms 3 ms 12 ms |
| Input impedance | 3.4 kOhm I2...I5 3.4 kOhm I8...I11 5.7 kOhm I0...I1 5.7 kOhm I6...I7 |
| Discrete output voltage | 24 V DC solid state 240 V AC relay 30 V DC relay |
| Output voltage limits | 20.4...28.8 V solid state |
| Maximum output current | 360 mA, solid state |
| Maximum current per output common | 8 A relay 0.72 A solid state |
| Current consumption | 30 mA 5 V DC at state 1) relay output 40 mA 24 V DC at state 1) relay output 5 mA 5 V DC at state 0) relay output |
| Output overvoltage protection | 38...40 V |
| Maximum tungsten load | <8 W solid state |
| Response time | 300 µs at state 0 relay 300 µs at state 1 relay 5 µs at state 0 solid state 5 µs at state 1 solid state |
| Minimum switchable load | 0.1 mA |
| Contact bounce time | <= 1 ms relay |
| Maximum leakage current | 0.1 mA at state 0 solid state |
| Drop-out voltage | 1 V at state 1 |
| Insulation between channel and internal logic | 1500 Vrms for 1 minute relay output 500 Vrms for 1 minute input circuit 500 Vrms for 1 minute solid state output |
| Insulation between channels | None |
| Contact resistance | 30 mOhm |
| Electrical durability | 500000 cycles AC-1 500 VA relay output 500000 cycles AC-14 250 VA relay output 500000 cycles AC-15 200 VA relay output 500000 cycles DC-1 60 W relay output 500000 cycles DC-13 30 W relay output |
| Supply circuit type | DC |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 20.4â¦26.2 V |
| Input current | 700 mA 26.2 V supply circuit |
| Inrush current | 1 A solid state output 50 A supply circuit |
| Power Consumption in W | 19 W |
| Maximum Number of I/O Expansion Module | 7 |
| I/O expansion capacity | 132 screw terminal discrete I/O 188 spring terminal discrete I/O 244 HE10 connector discrete I/O 7 x 8I or 7 x 2I or 7 x (4I/2O) screw terminal analogue I/O |
| Insulation resistance | >= 10 MOhm between I/O and earth terminals >= 10 MOhm between power supply and earth |
| I/O connection | Removable screw terminal block |
| Number of common point | 1 relay output 1 NO) 1 relay output 2 NO) 1 relay output 3 NO) 1 input 1 solid state output |
| Counting input number | 2 |
| Counting capacity | 32 bits |
| Counting frequency | 5000 Hz 20000 Hz |
| Pulse generator number | 2 |
| Pulse generator frequency | 7 kHz |
| Pulse generator function | RPLS pulse generator output RPWM pulse width modulation |
| Marking | CE |
| Fixing mode | By clips (35 mm symmetrical DIN rail) By screws (panel with fixing kit) By screws (solid plate with fixing kit) |
| Status LED | 1 LED per channel (Green) I/O 1 LED (Green) 10T 1 LED (Green) PWR 1 LED (Yellow) 100T 1 LED (Yellow) STAT |
| Product Weight | 0.408 lb(US) (0.185 kg) |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator