TeSys LR9F electronic overload relay, thermal setting range 90-150A, class 10, for protection of motors 55-75kW@400V. to be mounted directly below a TeSys F 3-pole contactor LC1 F115, F150, F185, use of a support mounting plate LA7F901 is recommended (to be ordered separately). Motor protection includes thermal overload of 1-phase and 3-phase motors, phase failure, phase unbalance, prolonged starting times, stalled rotor conditions. On the front of the relay, it provides a thermal adjustment dial, buttons for test, stop & reset, a trip indicator, trip auxiliary contacts 1NO+1NC. Multi standards certified (IEC, UL, CSA, CCC, Marine), Green Premium compliant (RoHs/Reach).
Main
| Characteristic | Value(s) |
|---|---|
| Range | TeSys |
| product name | TeSys LRF |
| Device short name | LR9F |
| Product or Component Type | Electronic thermal overload relay |
| Relay application | Motor protection |
| Product Compatibility | LC1F115...LC1F185 |
| Network type | AC |
| Thermal overload class | Class 10 IEC 60947-4 |
| Thermal protection adjustment range | 90â¦150 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Network Frequency | 50/60 Hz |
| Mounting support | Direct on contactor Plate |
| Tripping threshold | 1.12 +/- 0.06 In tripping IEC 60947-4-1 |
| Surge withstand | 4 kV IEC 61000-4-5 |
| Contacts type and composition | 1 NO + 1 NC |
| [Ith] conventional free air thermal current | 5 A control circuit |
| [Ue] rated operational voltage | 1000 V AC 50/60 Hz power circuit VDE 0110 group C |
| [Ui] rated insulation voltage | Power circuit 1000 V AC IEC 60947-4 |
| [Uimp] rated impulse withstand voltage | 8 kV IEC 60947-1 |
| Phase failure sensitivity | Tripping in 4 s +/- 20 % IEC 60947-4-1 |
| Reset | Manual reset on front relay |
| Control type | Dial White full-load current adjustment Test button Red Push-button Red reset Push-button stop |
| Local signalling | Trip indicator |
| Temperature compensation | -4â¦158 °F (-20â¦70 °C) |
| Current consumption | <= 5 mA no-load |
| switching capacity for alarm | 0...150 mA |
| Maximum voltage drop | <2.5 V closed state |
| Connections - terminals | Control circuit screw clamp terminals 1 0.001â¦0.004 in² (0.75â¦2.5 mm²) flexible - with cable end Control circuit screw clamp terminals 1 0.001â¦0.004 in² (0.75â¦2.5 mm²) solid Control circuit screw clamp terminals 1 0.001â¦0.006 in² (0.75â¦4 mm²) flexible - without cable end Control circuit screw clamp terminals 2 0.002â¦0.002 in² (1â¦1.5 mm²) flexible - with cable end Control circuit screw clamp terminals 2 0.002â¦0.004 in² (1â¦2.5 mm²) flexible - without cable end Control circuit screw clamp terminals 2 0.002 in² (1 mm²) solid Power circuit lugs-ring terminals M8 |
| Tightening torque | Control circuit 1.2 N.m screw clamp terminals Power circuit 18 N.m screw clamp terminals |
| Height | 3.8 in (96 mm) |
| Width | 4.5 in (115 mm) |
| Depth | 4.9 in (123.5 mm) |
| Product Weight | 1.951 lb(US) (0.885 kg) |
All PLC Direct products come with a 1-year warranty. The warranty is issued by PLC Direct. Warranty coverage commences at the date of purchase. The warranty is for mechanical defects or failures not caused by human factors including but not limited to (a) incorrect installation, (b) operating the unit in sub-optimal conditions or in scenarios not recommended by the manufacturer, (c) poor unit maintenance, etc. The warranty does not cover programming or software related issues.
If the product is eligible for PLC Direct’s warranty coverage and the customer encounters an issue with the product, we will request the item is shipped to us for diagnosis and examination. Regardless of the cause of product issues, the customer will bear responsibility for the cost of shipping the unit to PLC Direct for evaluation. Where the unit was damaged by human factors, we will offer a repair or replace quote; in cases where damage was caused by human factors, the customer is responsible for the cost of shipping the repaired/replaced unit from PLC Direct to the customer. Where the unit was not damaged by human factors but is covered by PLC Direct’s warranty, we will repair or replace the unit at our cost (or, in rare cases, refund you your purchase); in such cases, PLC Direct will bear the cost of shipping the repaired or replaced product back to the customer. It is up to PLC Direct’s discretion whether to repair, replace, or refund the customer in such cases. Diagnoses can take time to complete based on technician availability and the complexity of diagnosis.
In no event shall PLC Direct be liable for any damages except actual damages up to, but not exceeding, the amount paid to us for the product, including we shall not be liable for any consequential or indirect damages or lost profits whether or not advised of same.
PLC Direct offers free shipping worldwide. Product ship from a various warehouses worldwide based on the customer's and the product's location. The estimated delivery date on the product page is PLC Direct's best estimated assuming a US-based shipping destination.
Regardless of where the product is shipping from, PLC Direct covers all duties for US-based shipping destinations. For non-US-based shipping destinations, customers are responsible for duties as appropriate.
PLC Direct's focus is on balancing price with lead time. Some but not all products can be expedited. If you have questions about delivery ETAs, please contact our team.
Trusted By
"Fast service for obsolete parts"
Increasingly PLC/ HMI control platforms are becoming obsolete and parts are no longer supported, however PLC Direct had the HMI we needed and fast shipping for our system to get back online!
Buyer at GE Health
"Helping us move projects forward"
With supply chain issues increasingly affecting our business, PLC Direct has been there for us to supply the PLC products we need, when we need it. If they don't have it readily available, they find it and provide it quickly and reliably. This has helped us move forward with several projects that would have otherwise taken us many, many months to complete.
Buyer at E-Merge Systems – A Rockwell Integrator