keyence

Keyence CA-LF25Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF27 Keyence

€0,00

Sold Out

Specifications

Model				CA-LF27
Type				Protective lens filter 27
Note				For 27 mm 1.06" diameter screws

Keyence CA-LF27R Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF27Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF30 Keyence

€0,00

Sold Out

Specifications

Model				CA-LF30
Type				Protective lens filter 30.5
Note				For 30.5 mm 1.20" diameter screws

Keyence CA-LF30R Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF30Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF34 Keyence

€0,00

Sold Out

Specifications

Model				CA-LF34
Type				Protective filter
Note				For 34 mm 1.33" diameter screws

Keyence CA-LF34R Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF34Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF37R Keyence

€0,00

Sold Out

Specifications

Model				CA-LF37R
Type				Sharp Cut Filter (R60)

Keyence CA-LF37Y Keyence

€0,00

Sold Out

Specifications

Model				CA-LF37Y
Type				Blue Cut Filter

Keyence CA-LF40R Keyence

€0,00

Sold Out

Specifications

Model				CA-LF40R
Type				Sharp Cut Filter (R60)

Keyence CA-LF40Y Keyence

€0,00

Sold Out

Specifications

Model				CA-LF40Y
Type				Blue Cut Filter

Keyence CA-LF43 Keyence

€0,00

Sold Out

Specifications

Model				CA-LF43
Type				Protective filter
Note				For 43 mm 1.69" diameter screws

Keyence CA-LF43R Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LF43Y Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-LH12 Keyence

€242,95

In stock, 12 units

Specifications

Model				CA-LH12
Focal point				12 mm 0.47"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.15 m 0.5'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.07 % (-0.04 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 75 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH12G Keyence

€0,00

Sold Out

Specifications

Model		CA-LH12G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		12 mm 0.472"
F-stop range (aperture)		F1.4/4/8/16^*1
Minimum WD		0.15 m 0.5'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.07 % (-0.04 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 65 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH12P Keyence

€433,95

Only 5 units left

Specifications

Model				CA-LH12P
Focal point				12 mm 0.47"
F-stop range (aperture)				F1.4/4/8/16^*1
Minimum WD				0.15 m 0.5'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.07％ (-0.04％)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 75 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LH16 Keyence

€242,95

In stock, 11 units

Specifications

Model				CA-LH16
Focal point				16 mm 0.63"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				25.5 mm 1.00" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.05 % (-0.1 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 81 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH16G Keyence

€360,95

Only 2 units left

Specifications

Model		CA-LH16G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		16 mm 0.63"
F-stop range (aperture)		F1.4/4/8/16^*1
Minimum WD		0.2 m 0.7'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.05 % (-0.1 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 66 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH16HIGH-RESOLUTION Keyence

€418,95

Only 3 units left

Buy the Keyence CA-LH16HIGH-RESOLUTION - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence CA-LH16HIGH-RESOLUTION is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence CA-LH16P Keyence

€0,00

Sold Out

Specifications

Model				CA-LH16P
Focal point				16 mm 0.63"
F-stop range (aperture)				F1.4/4/8/16^*1
Minimum WD				0.2 m 0.7'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.05％ (-0.1％)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 75 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)