Static Control

Showing 1 - 24 of 214 products

€156,95

Only 8 units left

Specifications

Model				OP-87057
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				5 m 16.40'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 190 g

Keyence OP-87931 Keyence

€146,95

In stock, 12 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87930 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87929 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87928 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87927 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87926 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SK-H055 Keyence

€4.261,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SK-H050 Keyence

€1.561,95

Only 8 units left

Specifications

Model			SK-H050
Charge potential measurement	Measurement mode		High-precision mode, Wide-range mode
	Measuring distance	High-precision mode	25 mm 0.98"
		Wide-range mode	100 mm 3.94"
	Measuring range	High-precision mode	±2 kV
		Wide-range mode	±50 kV
	Measuring accuracy	High-precision mode	±10 V^*1
		Wide-range mode	±100 V^1^2
	Display resolution		0 to 999 V : 1 V, 1.00 to 9.99 kV : 0.01 kV. 10.0 kV and higher : 0.1 kV
	Sampling cycle		Approx 1.4 ms
Temperature measurement	Measuring range		0 to +40℃ 32°F to 104°F
	Measuring accuracy		±1°C 30.2 to 33.8°F^*3
	Display resolution		0.1°C 32.2°F
	Sampling cycle		1 s
Humidity measurement	Measuring range		10 to 85% RH
	Measuring accuracy		±5% RH^*3
	Display resolution		1% RH
	Sampling cycle		1 s
Charge monitor function	Ion balance measuring mode	Ion balance measuring range	±1 kV^*4
		Measured voltage display resolution	±10 V^4^5
			1 V^*4
	Static elimination time measuring mode	Charge voltage	±1400 V^*4
		Static elimination time display resolution	0.1 s^*4
		Measuring time	0 to 99 s^*4
Laser class			Class 1 Laser Product (IEC60825-1 : 2014, FDA (CDRH) Part 1040.10^*6)
PC interface			USB 2.0 Full Speed
Power supply			2 AA alkaline dry-cell batteries
Power supply	Operating time		8 hours (in charge potential measuring mode)
Environmental resistance	Ambient temperature		0 to +40 °C 32 to 104 °F (No freezing or condensation)
	Relative humidity		10 to 85 % RH (No condensation)^*7
Material			SK-H050 : PC-ABS, PC, SUS/SK-H055 : PC, SUS, PTFE, PVC
Weight			SK-H050: Approx. 240 g, SK-H055: Approx. 220 g
^1 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from measurements with a response time of 0.8 seconds. ^2 Measuring accuracy is satisfied in the range of ±30 kV. ^3 25°C 77°F, 50% RH. ^4 SK-H055 is required. ^5 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value). ^6 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^*7 10 to 60 % RH when using SK-H055.

Keyence OP-87934 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SK-C3 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87663 Keyence

€0,00

Sold Out

Specifications

Model				OP-87663
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				20 m 65.62'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 680 g

Keyence OP-87662 Keyence

€328,95

Only 1 unit left

Specifications

Model				OP-87662
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				10 m 32.81'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 360 g

Keyence OP-87661 Keyence

€0,00

Sold Out

Specifications

Model				OP-87661
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				5 m 16.40'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 190 g

Keyence OP-87660 Keyence

€0,00

Sold Out

Specifications

Model				OP-87660
Applicable product				IL Series
Number included				1 cable
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 80 g

Keyence OP-87059 Keyence

€302,95

Only 5 units left

Specifications

Model				OP-87059
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				20 m 65.62'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 680 g

Keyence OP-87058 Keyence

€176,95

In stock, 11 units

Specifications

Model				OP-87058
Type				Sensor head cable
Applicable product				IL,IG,GV-T Series head
Cable end				M8 straight - e-con
Length				10 m 32.81'
Material				Cable: Polyvinyl chloride (PVC)
Note				The cable is common to the transmitter and receiver sides, and can be used on either of them.
Weight				Approx. 360 g

Keyence SK-050 Keyence

€979,95

Only 6 units left

Specifications

Model			SK-050
Charge potential measurement	Measurement mode		High-accuracy mode, Wide-range mode
	Reference distance	High-precision mode	25 mm 0.98"
		Wide-range mode	100 mm 3.94"
	Measuring distance	High-precision mode	5 to 50 mm 0.20" to 1.97"
		Wide-range mode	60 to 120 mm 2.36" to 4.72"
	Measuring range	High-precision mode	±2 kV ^*1
		Wide-range mode	±50 kV ^1 ^2
	Measuring accuracy	High-precision mode	±10 V ^*3
		Wide-range mode	±100 V ^*3
	Sampling cycle		Approx. 1.4 ms
Temperature measurement	Measuring range		0 to 50°C 32 to 122°F
	Measuring accuracy		±1°C ±1.8°F ^*4
	Display resolution		0.1°C 0.18°F
	Sampling cycle		1 s
Humidity measurement	Measuring range		10 to 85% RH
	Measuring accuracy		±5% RH ^*4
	Display resolution		0.1% RH
	Sampling cycle		1 s
Ion balance measuring mode	Ion balance measuring range		±1 kV ^*5
	Measuring accuracy		±10 V ^5 ^6
	Display resolution		1 V ^*5
Environmental resistance	Ambient temperature		0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity		10 to 85% RH (no condensation)
	Pollution degree		-
Material			Body case: PC, Metal parts: SUS, Cable: PVC
Weight			Approx. 35 g 1.24 oz
^1 If the distance to the sensing target is shorter than the reference distance, even if the conditions are within the measurable range, measurement cannot be performed up to the upper limit of the measuring range. ^2 Measurement accuracy is satisfied in the range of ±30 kV. ^3 Within ±100 V when using high-precision mode; within ±1 kV when using wide-range mode. In other ranges, display value has an accuracy of ±10% (display value). Values are obtained from a mean of 256 measurements. ^4 At 25°C 77°F with 50% RH. ^5 OP-87934 is required. ^6 Within ±100 V. In other ranges, display value has an accuracy of ±10% (display value).

Keyence SK-3050 Keyence

€0,00

Sold Out

Specifications

Model		SK-3050
Type		DIN rail mounting
Main unit/expansion unit		Expansion unit
Display	Display resolution	0.1 V
	Display range	-
Analog voltage output		None
Analog current output
Control input	Zero-shift input	Switchable between non-voltage input and voltage input [Non-voltage input] ON voltage: 2 V or less, OFF current: 0.02 mA or less [Voltage input] Maximum input rating: 30 V or less, ON voltage: 7.5 V or more, OFF current: 0.05 mA or less ^*1
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*2
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*2
Power supply	Power supply voltage	Supplied from main unit ^*3
	Power consumption	1170 mW or less (39 mA or less at 30 V) (excluding load current of each output) ^*4
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	85% RH or less (No condensation)
	Pollution degree	2
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 140 g 4.94 oz (including accessories)
^1 Inputs are assigned to the four external input lines. ^2 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^3 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^4 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-3000 Keyence

€0,00

Sold Out

Specifications

Model		SK-3000
Type		DIN rail mounting
Main unit/expansion unit		Main unit
Display	Display resolution	0.1 V
	Display range	-
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*1
Analog current output		4 to 20 mA, Max. load resistance: 350 Ω ^*1
Control input	Zero-shift input	Switchable between non-voltage input and voltage input [Non-voltage input] ON voltage: 2 V or less, OFF current: 0.02 mA or less [Voltage input] Maximum input rating: 30 V or less, ON voltage: 7.5 V or more, OFF current: 0.05 mA or less ^*2
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*3
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*3
Power supply	Power supply voltage	10 to 30 VDC (including ripple (P-P) 10% or less) ^*4
	Power consumption	1650 mW or less (55 mA or less at 30 V) (excluding load current of each output) ^*5
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	85% RH or less (No condensation)
	Pollution degree	2
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 150 g 5.30 oz (including accessories)
^1 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^2 Inputs are assigned to the four external input lines. ^3 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^4 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^*5 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-1050 Keyence

€480,95

Only 1 unit left

Specifications

Model		SK-1050
Type		DIN rail mounting
Main unit/expansion unit		Expansion unit
Display	Display resolution	0.001 kV
	Display range	±99.999 kV to 99 kV (4-level selection available)
Analog voltage output		None
Analog current output
Control input	Zero-shift input	Non-voltage input ^*1
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*2
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*2
Power supply	Power supply voltage	Supplied from main unit ^*3
	Power consumption	1170 mW or less (39 mA or less at 30 V) (excluding load current of each output) ^*4
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	10 to 85% RH (no condensation)
	Pollution degree	-
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 140 g 4.94 oz (including accessories)
^1 Inputs are assigned to the four external input lines. Non-voltage input rating: ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating: maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. ^2 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^3 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^4 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SK-1000 Keyence

€909,95

Only 5 units left

Specifications

Model		SK-1000
Type		DIN rail mounting
Main unit/expansion unit		Main unit
Display	Display resolution	0.001 kV
	Display range	±99.999 kV to 99 kV (4-level selection available)
Analog voltage output		±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*1
Analog current output		4 to 20 mA, Max. load resistance: 350 Ω ^*1
Control input	Zero-shift input	Non-voltage input ^*2
	Timing input
	Reset input
	Bank input
Control output	Judgment output	Open collector output (NPN/PNP switching, N.O./N.C. switching) ^*3
	Alarm output	Open collector output (NPN/PNP switching, N.C.) ^*3
Power supply	Power supply voltage	10 to 30 VDC (including ripple (P-P) 10% or less) ^*4
	Power consumption	1650 mW or less (55 mA or less at 30 V) (excluding load current of each output) ^*5
Environmental resistance	Ambient temperature	0 to 50°C 32 to 122°F (No freezing or condensation)
	Relative humidity	10 to 85% RH (no condensation)
	Pollution degree	-
Material		Body case and front cover: PC, Key top: POM, Cable: PVC
Weight		Approx. 150 g 5.30 oz (including accessories)
^1 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^2 Inputs are assigned to the four external input lines. Non-voltage input rating: ON voltage 2 V or lower, OFF current 0.02 mA or lower. Voltage input rating: maximum input rating is 30 V, ON voltage 7.5 V or higher, OFF current 0.05 mA or below. ^3 NPN open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), 30 V or less, residual voltage: 1 V or less (1.5 V or less when adding 6 or more expansion units, including main unit); PNP open collector output rating: maximum 50 mA/ch (20 mA/ch when expansion units are added), below power supply voltage, residual voltage: 2 V or less (2.5 V or less when adding 6 or more expansion units, including main unit) ^4 Use 20 to 30 V as the power supply voltage when using 6 or more expansion units, including the main unit. ^*5 When connecting 8 units for DL connection, the maximum power consumption is 11.3 W.

Keyence SJ-U3 Keyence

€409,95

Only 2 units left

Specifications

Model		SJ-U3
Rating	Rating input	100 to 240 VAC (50/60Hz)
	Rated output	24VDC 2.7A
Environmental resistance	Ambient temperature	0 to +35°C 32 to +95°F
	Relative humidity	20 to 80% (no condensation)
Weight		Approx. 260g

Keyence SJ-U1 Keyence

€475,95

Only 3 units left

Specifications

Model		SJ-U1
Rating	Rating input	100 to 240 VAC (50/60Hz) 96VA^*1
	Rated output	24 VDC 1.67A
^*1 The included AC cable has power rating of 125 V for use in Japan.

Page 1 / 9Next