Sensors

Showing 1753 - 1776 of 1788 products

€0,00

Sold Out

Specifications

Model				OP-88543
Type				Connector Set for Sensor Head Connection
Appearance				Pack of 2
Weight				Approx. 2 g

Keyence OP-88542 Keyence

€0,00

Sold Out

Specifications

Model				OP-88542
Appearance				Amplifier Holder for Standard Models (Includes M3 Screws × 2)
Material				SUS304 Other
Weight				Approx. 32 g

Keyence OP-88504 Keyence

€0,00

Sold Out

Specifications

Model				OP-88504
Appearance				Pitch-Conversion Mounting Bracket (Includes Sensor Head Fastening Screws × 2)
Material				SUS316L Other
Weight				Approx. 9 g

Keyence OP-88503 Keyence

€0,00

Sold Out

Specifications

Model				OP-88503
Appearance				Adjustable Bracket Locking Post (65 mm 2.56")
Material				SUS316L Other
Weight				Approx. 21 g

Keyence OP-88502 Keyence

€0,00

Sold Out

Specifications

Model				OP-88502
Appearance				Adjustable Bracket B (Includes Sensor Head Fastening Screw × 2)
Material				SUS316L Other
Weight				Approx. 20 g

Keyence OP-88501 Keyence

€0,00

Sold Out

Specifications

Model				OP-88501
Appearance				Adjustable Bracket A (Includes Sensor Head Fastening Screw × 2)
Material				SUS316L Other
Weight				Approx. 15 g

Keyence OP-88500 Keyence

€0,00

Sold Out

Specifications

Model				OP-88500
Appearance				Rear Mounting Bracket (Includes Sensor Head Fastening Screws × 2)
Material				SUS316L Other
Weight				Approx. 17 g

Keyence OP-88499 Keyence

€0,00

Sold Out

Specifications

Model				OP-88499
Appearance				L-Type Mounting Bracket (Includes Sensor Head Fastening Screws × 2)
Material				SUS316L Other
Weight				Approx. 9 g

Keyence OP-88296 Keyence

€0,00

Sold Out

Specifications

Model				OP-88296
Type				Loose wires/M12 adapter
Applicable product				FD-XA1/XA5 cables, or cables with cross sectional area 0.14 to 0.34 mm² and outer diameter ø 3.5 to 6 mm 0.14 " to 0.24 "
Frequency of connections between conductors of the same cross section				10
Insertion/withdrawal cycles				More than 100 times
Wire diameter including insulation				ø 0.7 to 1.6 mm 0.028 " to 0.06 "
enclosure rating				IP65/67
Ambient temperature				-25 °C to +80 °C -13 to 176 °F
Note				A connector that converts loose wires to a M12 4-pin connector. Useful for connecting to IO-Link compatible master units.
Weight				Approx. 12 g 0.42 oz

Keyence OP-88245 Keyence

€99,95

Only 7 units left

Specifications

Model				OP-88245
Type				Amplifier securing bracket (for main unit)
Overview				It can be mounted without the DIN rail.

Keyence LR-XB1 Keyence

€0,00

Sold Out

Specifications

Model				LR-XB1
Appearance				Fine-Tuning Mounting Bracket (Includes Sensor Head Fastening Screws × 2 Mounting Bracket Locking Screws × 2/Plate Nut × 1)
Material				Zinc Nickel Plating SUS304 PPS Other
Weight				Approx. 30 g

Keyence OP-88716 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88715 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88714 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-88507 Keyence

€0,00

Sold Out

Specifications

Model				OP-88507
Type				High-flex
Sensor Side				M8 4-Pin Straight
Cable Connector				Loose wires
Length				10 m 32.8'
Material				Cable: PVC, Connector: Nickel-plated brass
Weight				Approx. 370 g

Keyence OP-88506 Keyence

€0,00

Sold Out

Specifications

Model				OP-88506
Type				High-flex
Sensor Side				M8 4-Pin Straight
Cable Connector				Loose wires
Length				5 m 16.4'
Material				Cable: PVC, Connector: Nickel-plated brass
Weight				Approx. 190 g

Keyence OP-88505 Keyence

€556,95

Only 2 units left

Specifications

Model				OP-88505
Type				High-flex
Sensor Side				M8 4-Pin Straight
Cable Connector				Loose wires
Length				2 m 6.6'
Material				Cable: PVC, Connector: Nickel-plated brass
Weight				Approx. 80 g

Keyence OP-26751 Keyence

€102,95

Only 9 units left

Specifications

Model				OP-26751
Type				End unit
Overview				Used to secure the amplifier when main and expansion units are additionally set.
Applicable product				Expansion type sensor amplifier including FS-N10 Series.
Number included				2 pcs.
Material				Polycarbonate, stainless steel, Screw: Steel (Nickel plated)
Note				When adding sensor amplifier, use DIN rail and surely use end unit at both ends.

Keyence LR-XH50 Keyence

€407,95

Only 10 units left

Specifications

Model		LR-XH50
Type		Cable Length: 2 m 6.6'
Detecting Distance		25.0 to 50.0 mm 0.98" to 1.97"
Standard Detectable Deviation		0.5 mm 0.02"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.2 mm × 1.5 mm 0.008" × 0.06" (at a detecting distance of 50 mm 1.97")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label
Weight		approx. 75 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LR-XH250 Keyence

€424,95

In stock, 12 units

Specifications

Model		LR-XH250
Type		Cable Length: 2 m 6.6'
Detecting Distance		30 to 250 mm 1.18" to 9.84"
Standard Detectable Deviation		30 to 180 mm: 9 mm, 180 to 250 mm: 18 mm 1.18" to 7.09": 0.35", 7.09" to 9.84": 0.71
Display Resolution		1 to 2 mm 0.04" to 0.08"
Spot Size		Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 250 mm 9.84")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 8000 lux or less, Sunlight: 8000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label
Weight		approx. 75 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LR-XH100(10M) Keyence

€0,00

Sold Out

Specifications

Model		LR-XH100(10M)
Type		Cable Length: 10 m 32.8'
Detecting Distance		25.0 to 100.0 mm 0.98" to 3.94"
Standard Detectable Deviation		1.0 mm 0.04"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.3 mm × 2 mm 0.012" × 0.08" (at a detecting distance of 100 mm 3.94")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label, sensor head connector
Weight		approx. 250 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LR-XH100 Keyence

€348,95

Only 10 units left

Specifications

Model		LR-XH100
Type		Cable Length: 2 m 6.6'
Detecting Distance		25.0 to 100.0 mm 0.98" to 3.94"
Standard Detectable Deviation		1.0 mm 0.04"
Display Resolution		0.1 mm 0.004"
Spot Size		Approx. 0.3 mm × 2 mm 0.012" × 0.08" (at a detecting distance of 100 mm 3.94")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 16,000 lux or less, Sunlight: 16000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label
Weight		approx. 75 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LR-XN11C Keyence

€348,95

In stock, 17 units

Specifications

Model		LR-XN11C
Type		NPN Output/PNP Output (Selectable output)
Cable/Connector		M8 connector^*1
Main Unit/Expansion Unit		Main Unit (expansion not possible)
No. of Control Outputs		2^*2
No. of External Inputs		1^*2
Response Time		500 µs^*3/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	Open collector, 30 VDC or lower, N.O./N.C. 100 mA or lower for 1 output; 100 mA or lower in total for 2 outputs Residual voltage NPN: 1.4 V or lower (output current: 10 mA or lower)/2 V or lower (output current: 10 to 100 mA), PNP: 1.6 V or lower (output current: 10 mA or lower)/2.2 V or lower (output current: 10 to 100 mA)
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time: 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF only when External Set is selected)
Unit Expansion		—
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices		—
Power supply	Power voltage	16 to 30 VDC^*4 (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 1150 mW (47 mA or lower at 24 V, 64 mA or lower at 16 V), ECO ON/ALL: 985 mW (40 mA or lower at 24 V, 53 mA or lower at 16 V) (excluding Load Current)
Environmental resistance	Ambient temperature	−20 to +55°C -4°F to 131°F (no freezing)^*5
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² (50G); 3 times each for X, Y, and Z axes
Case Material		Main Unit and Cover: Polycarbonate
Accessories		Instruction manual
Weight		Approx. 22 g
^1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. ^2 Output 2 and the external input are selectable. ^3 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported ^4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. ^*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Keyence LR-XN10 Keyence

€226,95

Only 9 units left

Specifications

Model		LR-XN10
Type		—
Cable/Connector
Main Unit/Expansion Unit		Expansion Unit
No. of Control Outputs		None^*1
No. of External Inputs		—
Response Time		500 µs^*2/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link		—
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	—
	External Input
Unit Expansion		Up to 8 expansion units possible (including main unit, a total of 9 units connected) However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series.
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices		OFF/4 units/8 units selectable^*3
Power supply	Power voltage	16 to 30 VDC^*4 (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 1060 mW (44 mA or lower at 24 V, 61 mA or lower at 16 V), ECO ON/ALL: 895 mW (37 mA or lower at 24 V, 50 mA or lower at 16 V)
Environmental resistance	Ambient temperature	−20 to +55°C -4°F to 131°F (no freezing)^*5
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² (50G); 3 times each for X, Y, and Z axes
Case Material		Main Unit and Cover: Polycarbonate
Accessories		Instruction manual
Weight		Approx. 21 g
^1 This counts as 1 output when expanding with multiple units to the FS-MC8N/MC8P and NU Series. ^2 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported ^3 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable. ^4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. ^*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Previous Page 74 / 75Next