1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part designation | Tap link connecting cable |
| Accessory / separate part type | Connection cable |
| Accessory / separate part category | Connection accessories |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product compatibility | TSXFPACC3 TSXFPACC10 TSXFPACC4 TSXFPC10 |
| Cable length | 3 m |
| Type of cable | 2 shielded twisted pairs |
| Ohmic cable resistance | 150 Ohm |
| Product weight | 0.41 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part designation | Connection cable for PCMCIA card and T-junction |
| Accessory / separate part type | Fipio/Fipway connection cable |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | PCMCIA card T-junction |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product compatibility | TBXFPACC10 TSXFPACC3 TSXFPACC4 TSXFPP10 TSXFPP20 |
| Cable length | 3 m |
| Electrical connection | 1 connector miniature 20 pins for PCMCIA card side 1 connector SUB-D 9 for T-junction side |
| Product weight | 0.41 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Premium Automation platform |
| Accessory / separate part designation | Electrical repeater |
| Accessory / separate part type | Repeater |
| Accessory / separate part category | Connection accessories |
| Product specific application | To enable the connection of 2 segments of up to 1000 m each To increase the number of stations (maximum 64) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Product weight | 0.52 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Modicon Premium Automation platform |
| Accessory / separate part designation | Dust and damp proof connection box |
| Accessory / separate part type | Connection box |
| Accessory / separate part category | Connection accessories |
| Product specific application | For trunk cable tap link |
Complementary
| Characteristic | Value(s) |
|---|---|
| Electrical connection | 1 female connector |
| Enclosure material | Zamak |
| Product weight | 0.66 kg |
This product is part of the Modicon TSX Micro range, an offer of Programmable Logic Controllers (PLC). This Ethernet module supports 10/100Mbps, 56kbps transmission rate with tree-structure, star Ethernet topology. It is an Ethernet module with a rated supply voltage of 24V DC, a current consumption of 100mA, 50mA to 200mA at 24V DC and a power dissipation of 2.4W to 4W. It is furnished with screw terminal block, mini DIN for terminal port, RJ45, 9-way SUB-D connectors for electrical connection. Maximum cable distance between devices is 100m between terminal device and hubs by Ethernet. Its dimensions are 39.83mm (width) x 116.7mm (depth) x 151.5mm (height) and weighs 0.28kg. It is suitable for infrastructures, machine and manufacturing control applications. This product is certified by CE, GL, RINA, GOST, DNV, LR, RRS and BV. It meets UL 508, IEC 1000-4-2 level 3, IEC 1000-4-3 level 3, IEC 1000-4-4 level 3, IEC 1000-4-5, ANSI/IEEE Std 802.3, ISO/IEC 8802-3, IEC 61131-2 etc. standards. The module includes gateway module, user manual and web designer software (CD-ROM). The automation platform designed to enhance system's performance. With Micro's accuracy, flexibility and increased productivity, you have a real partner at the heart of the machine.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | FactoryCast Gateway |
| Product or component type | Ethernet module |
| Kit composition | Web Designer software (CD-ROM) User manual Gateway module |
| Concept | Transparent Ready |
| Type of modem | Via telephone line Via satellite Via radio |
| Structure type | Heterogeneous industrial bus Ethernet conforming to IEEE 802.3 |
| Topology | Star Ethernet Tree-structure Ethernet |
| Transmission rate | 10/100 Mbit/s for Ethernet 56 kbit/s maximum for serial link by modem |
| Web services | Web pages defined by the user (8 MB available) PLC diagnostics system function RackViewer Access function to the PLC data and variables Data Editor Maximum simultaneous connection of 8 standard browsers Communication diagnostics function IP configuration for TSX ETZ 410/510 module via standard browser Graphic objects editor |
| Communication service | 1 kB client/server requests for Uni-Telway 128 byte client/server requests for Uni-Telway 128 byte synchronous requests for Modbus Client/server mode for Modbus Client/server mode for Uni-Telway |
| [Us] rated supply voltage | 24 V DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication port protocol | Serial link by modem Ethernet |
| Physical interface | RTC link RS232 for serial link by modem |
| Exchange mode | Half or full duplex serial link by modem Manchester-type baseband Ethernet |
| Transmission support medium | Double shielded twisted pair of type STP 10BASE-T ETHERNET Ethernet cable category 5 100BASE-T ETHERNET Shielded RS232 cable serial link by modem |
| Maximum number of connected devices | Ethernet: 64 star Serial link by modem: 2 star |
| Maximum cable distance between devices | 100 m between terminal device and hubs by ETHERNET |
| Ethernet service | Remote terminal Download of Uni-Telway PL7 applications Inter-PLC communication in Uni-Telway or Modbus TCP/IP Diagnostics module Adjustment, debugging and modifications to the program Scanned inputs/outputs service performed |
| Supply voltage limits | 19.2â¦30 V DC |
| Input overvoltage protection | 34 V |
| Power dissipation in W | 2.4â¦4 W |
| Electrical connection | 1 connector mini DIN for terminal port (TER address) 1 connector RJ45 for Uni-Telway auxiliary port RS485 serial link 1 connector SUB-D 9 for RS232 serial link (Modem) 1 connector RJ45 Screw terminal block for connecting to the external power supply |
| Local signalling | 1 LED for RUN 1 LED for ERR 1 LED for RX/TX |
| Current consumption | 100 mA at 24 V DC 50...200 mA at 24 V DC |
| Mounting support | Mounting plate |
| Width | 39.83 mm |
| Height | 151.5 mm |
| Depth | 116.7 mm |
| Product weight | 0.28 kg |
This product is part of the Modicon TSX Micro range, an offer of Programmable Logic Controllers (PLC). This Ethernet module supports 10/100Mbps, 56kbps transmission rate with tree-structure, star Ethernet topology. It is an Ethernet module with a rated supply voltage of 24V DC, a current consumption of 100mA, 50mA to 200mA at 24V DC and a power dissipation of 2.4W to 4W. It is furnished with screw terminal block, mini DIN for terminal port, RJ45, 9-way SUB-D connectors for electrical connection. Maximum cable distance between devices is 100m between terminal device and hubs by Ethernet. Its dimensions are 39.83mm (width) x 116.7mm (depth) x 151.5mm (height) and weighs 0.28kg. It is suitable for infrastructures, machine and manufacturing control applications. This product is certified by CE, GL, RINA, GOST, DNV, LR, RRS and BV. It meets UL 508, IEC 1000-4-2 level 3, IEC 1000-4-3 level 3, IEC 1000-4-4 level 3, IEC 1000-4-5, ANSI/IEEE Std 802.3, ISO/IEC 8802-3, IEC 61131-2 etc. standards. The module includes gateway module, user manual and web designer software (CD-ROM). The automation platform designed to enhance system's performance. With Micro's accuracy, flexibility and increased productivity, you have a real partner at the heart of the machine.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | FactoryCast Gateway |
| Product or component type | Ethernet module |
| Kit composition | Gateway module User manual Web Designer software (CD-ROM) |
| Concept | Transparent Ready |
| Type of modem | Via satellite Via radio Via telephone line |
| Structure type | Heterogeneous industrial bus Ethernet conforming to IEEE 802.3 |
| Topology | Star Ethernet Tree-structure Ethernet |
| Transmission rate | 10/100 Mbit/s for Ethernet 56 kbit/s maximum for serial link by modem |
| Web services | Web pages defined by the user (8 MB available) Access function to the PLC data and variables Data Editor Communication diagnostics function Graphic objects editor PLC diagnostics system function RackViewer Maximum simultaneous connection of 8 standard browsers IP configuration for TSX ETZ 410/510 module via standard browser |
| Communication service | 1 kB client/server requests for Uni-Telway 128 byte client/server requests for Uni-Telway 128 byte synchronous requests for Modbus Client/server mode for Modbus Client/server mode for Uni-Telway |
| [Us] rated supply voltage | 24 V DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication port protocol | Serial link by modem Ethernet |
| Physical interface | RTC link RS232 for serial link by modem |
| Exchange mode | Half or full duplex serial link by modem Manchester-type baseband Ethernet |
| Transmission support medium | Double shielded twisted pair of type STP 10BASE-T ETHERNET Ethernet cable category 5 100BASE-T ETHERNET Shielded RS232 cable serial link by modem |
| Maximum number of connected devices | Ethernet: 64 star Serial link by modem: 2 star |
| Maximum cable distance between devices | 100 m between terminal device and hubs by ETHERNET |
| Ethernet service | Inter-PLC communication in Uni-Telway or Modbus TCP/IP Diagnostics module Download of Uni-Telway PL7 applications Remote terminal Scanned inputs/outputs service performed Adjustment, debugging and modifications to the program |
| Supply voltage limits | 19.2â¦30 V DC |
| Input overvoltage protection | 34 V |
| Power dissipation in W | 2.4â¦4 W |
| Electrical connection | 1 connector mini DIN for terminal port (TER address) 1 connector RJ45 for Uni-Telway auxiliary port RS485 serial link 1 connector SUB-D 9 for RS232 serial link (Modem) 1 connector RJ45 Screw terminal block for connecting to the external power supply |
| Local signalling | 1 LED for RUN 1 LED for ERR 1 LED for RX/TX |
| Current consumption | 100 mA at 24 V DC 50...200 mA at 24 V DC |
| Mounting support | Mounting plate |
| Width | 39.83 mm |
| Height | 151.5 mm |
| Depth | 116.7 mm |
| Product weight | 0.28 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Ethernet TCP/IP module |
| Automation architecture | Premium Warm Standby |
| Physical interface | AUI - 100BASE-5 1 AUI cable RJ45 - 10BASE-T 1 twisted pair |
| Transmission rate | 10 Mbit/s |
| Communication service | Modbus TCP messaging SNMP agent Uni-TE messaging Common words, Ethway/X-Way |
| Supply | Via the power supply of the rack |
| Local signalling | 1 LED for collision detection (COL) 1 LED for Ethernet network status (RUN) 1 LED for Ethernet port fault (ERR) 1 LED for transmission/reception activity (TX/TR) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication Port Protocol | Modbus TCP Ethway/X-Way Uni-Telway |
| Maximum number of connections | 64 |
| Web server | Transparent ready class A10 |
| Marking | CE |
| Product compatibility | PL7 Pro Unity Pro |
| Current consumption | 1200 mA 5 V DC with remote power supply (AUI) 800 mA 5 V DC without remote power supply (RJ45) |
| Module format | Standard |
| Product Weight | 0.75 lb(US) (0.34 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | FactoryCast HMI Gateway |
| Product or component type | Web server and gateway module/router module |
| Concept | RTU Transparent Ready |
| Memory capacity | 32 MB internal Up to 1 GB Compact Flash Up to 1 GB USB memory stick |
| Type of modem | GSM/GPRS 900/1800 MHz |
| Web server | Class D20 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Kit composition | Web Designer software (CD-ROM) Web server and gateway module |
| Communication gateway | Ethernet TCP/IP to Modbus Modem to Modbus Modem to Ethernet TCP/IP router/RAS server (remote access server) |
| Web services | Access to the list of connected products configurable Built-in mini firewall configurable Control and monitoring functions via predefined web pages configurable Customizable graphic monitoring interface configurable Device diagnostic via predefined web pages configurable Hosting of web pages and any user document configurable Password protection configurable Portal type web server configurable |
| internal processing | SMTP client FTP client/server SOAP protocol BootP/DHCP protocol PPP protocol Security miniature firewall on-board SNMP agent VPN security NAT router |
| [Us] rated supply voltage | 12 V DC 24 V DC |
| Supply voltage limits | 9â¦30 V DC |
| Supply | External |
| [In] rated current | 100 mA |
| Integrated connection type | Serial link modem male SUB-D 9 PPP, PAP authentification RS232C, half or full duplex, 57 kbit/s Ethernet TCP/IP 2-port RJ45, 10...100 Mbit/s, 1 twisted pair Serial link RJ45 Modbus TCP/IP master RS485, 115 kbit/s |
| Maximum number of connected devices | Serial link: 31 |
| Port Ethernet | 10BASE-T/100BASE-TX |
| Discrete input number | 6 |
| Discrete input logic | Positive |
| Discrete output number | 2 |
| Discrete output logic | Positive |
| Mounting support | Symmetrical DIN rail Plate |
| LED indicators | 1 LED for RUN 1 LED for BAT 1 LED for CH0 1 LED for CH1 1 LED for CH2 (PPP, Modbus, modem activity) 1 LED for ERR 1 LED for Ethernet activity (Ethernet) 1 LED for EXT (memory extension) |
| Current consumption | 100 mA |
| Width | 73.2 mm |
| Height | 151.5 mm |
| Depth | 116.7 mm |
| Product weight | 0.922 kg |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Ethernet/IP network module |
| Physical interface | RJ45 - 10BASE-T/100BASE-TX 1 twisted pair |
| Transmission rate | 10/100 Mbit/s with automatic recognition |
| Communication service | Auto MDI/MDX CIP Explicit messaging (client messaging) CIP implicit messaging (I/O communication) DHCP/BootP server SNMP agent |
| Supply | Via the power supply of the rack |
| Local signalling | 1 LED (green/red) for network communication status (Net Status) 1 LED (green) for backplane communication status (RUN) 1 LED (red) for collision detection (COL) 1 LED (yellow) for configuration status (STS) 1 LED (red) for error condition (ERR) 1 LED (green/red) for status of the module (Mod Status) 1 LED (yellow) for transmission activity (TX) 1 LED (yellow) for reception activity (RX) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication Port Protocol | EtherNet/IP |
| Maximum number of connections | 128 |
| Marking | CE |
| Product compatibility | Unity Pro >= V4.0) |
| Current consumption | 490 mA 5 V DC |
| Module format | Standard |
| Product Weight | 0.75 lb(US) (0.34 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Accessory / separate part designation | Dust and damp proof connection box |
| Accessory / Separate Part Type | Connection box |
| Accessory / separate part category | Connection accessories |
| Product Specific Application | PC compatible terminal connection via 9-way female SUB-D 9 connector For trunk cable tap-off via two M23 connectors Remote 24 V DC power supply distribution via 7/8" connector |
Complementary
| Characteristic | Value(s) |
|---|---|
| Electrical connection | 1 connector SUB-D 9 1 female connector M23 1 male connector 7/8" |
| Product Weight | 1.576 lb(US) (0.715 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Discrete input/output module on Fipio |
| Discrete I/O number | 16 |
| Group of channels | 1 group of 8 inputs 2 groups of 4 outputs |
| Discrete input number | 8 EN/IEC 61131 type 2 |
| Input compatibility | With 2-wire/3-wire proximity sensors |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete input voltage | 24 V DC |
| Discrete input logic | Positive |
| Discrete input current | 7 mA |
| Sensor power supply | 19.2â¦30 V |
| Voltage state 0 guaranteed | <= 5 V |
| Voltage state 1 guaranteed | >= 11 V |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 6 mA 11 V |
| Response time | 3.5 ms from state 0 to 1 on input 3.5 ms from state 1 to 0 on input |
| Power supply monitoring | 14â¦18 V DC preactuator 14â¦18 V DC sensor |
| Discrete output number | 8 |
| Discrete output type | Solid state |
| Discrete output voltage | 24 V DC |
| Output voltage limits | 19.2...30 V |
| Discrete output current | 0.5 A |
| Maximum output current | 0.625 A 140 °F (60 °C) per channel 1.2 A 104 °F (40 °C) per group of 4 channels 2 A per group of 4 channels |
| Maximum leakage current | 1 mA at state 0 |
| [Ures] residual voltage | 0.5 V at state 1 on output |
| Response time on output | < 0.5 ms resistive |
| Short-circuit protection | 1.5 A by thermal circuit breaker on output 350 mA per 4 channels group on input |
| Output overload protection | 1.5 A by thermal circuit breaker on output |
| Output overvoltage protection | By transil diode |
| Isolation between channels | None |
| Isolation voltage | 500 V AC between bus and internal logic |
| Isolation between output channels group | 60 Vrms AC |
| Isolation between channels and internal logic | 60 Vrms AC |
| Isolation between input channel and output channel | 60 V AC |
| Local signalling | 3 LEDs for module operation and integrated communication 16 LEDs for channels status 1 LED for sensor power supply fault 2 LEDs for preactuator power supply |
| Electrical connection | 1 connector dust and damp proof male M23 for Fipio bus connctn, 24V DC power supply for sensor & internal electric of mod 1 connector male 7/8 inch for 2 24 V DC preactuators power supplies 8 connectors female M12 4 for connecting sensors and 4 for preactuators |
| Operating position | Any position |
| Marking | CE |
| Current consumption | 80 mA 24 V DC 5 outputs at state 1 |
| Product Weight | 1.19 lb(US) (0.54 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Discrete input module on Fipio |
| Discrete I/O number | 8 |
| Group of channels | 1 group of 8 inputs |
| Discrete input number | 8 EN/IEC 61131 type 2 |
| Input compatibility | With 2-wire/3-wire proximity sensors |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete input voltage | 24 V DC |
| Discrete input logic | Positive |
| Discrete input current | 7 mA |
| Sensor power supply | 19.2â¦30 V |
| Voltage state 0 guaranteed | <= 5 V |
| Voltage state 1 guaranteed | >= 11 V |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 6 mA 11 V |
| Response time | 3.5 ms from state 0 to 1 on input 3.5 ms from state 1 to 0 on input |
| Power supply monitoring | 14â¦18 V DC sensor |
| Short-circuit protection | 350 mA per 4 channels group on input |
| Isolation between channels | None |
| Isolation voltage | 500 V AC between bus and internal logic |
| Local signalling | 1 LED for sensor power supply 3 LEDs for module operation and integrated communication 8 LEDs for channels status |
| Electrical connection | 1 connector dust and damp proof male M23 for Fipio bus connctn, 24V DC power supply for sensor & internal electric of mod 8 connectors female M12 for connecting sensors |
| Operating position | Any position |
| Marking | CE |
| Current consumption | 80 mA 24 V DC |
| Product Weight | 1.1 lb(US) (0.5 kg) |
