1 year warranty
DIN socket iPC-2P+E -16A-250VAC- VDE 0620 -german std-with volt.pres.indic.light
This Acti9 iOF is a contact auxiliary for iSW. it has a changeover contact, rated current is 3A at 415VAC and 6A at 250VAC. Mounting is performed on the left of Acti9 iSW switches with operational current less than or equal to 32A. The width in 9mm pitches is 2. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. The dimensions are (W) 18mm x (H) 77mm x (D) 75mm.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Device short name | iOF |
| Product or component type | OC contact |
| Signal contacts composition | 1 C/O |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 3 A at 415 V AC 6 A at 250 V AC |
| Mounting mode | Fixed |
| Mounting support | 35 mm DIN rail |
| 9 mm pitches | 2 |
| Height | 77 mm |
| Width | 18 mm |
| Depth | 75 mm |
| Colour | White |
| Range compatibility | Acti9 iSW |
| Auxiliary connection terminal | Screw terminal 10 mm² |
DIN rail mounting base - 22 mm units - for control and signalling unit
This Acti9 product is a mounting support on DIN rail. It is a set of 1. It can be fixed by clips. It is dedicated for small commercial market. The product color is white (RAL9003). The product weight is 0.04kg.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| Range of product | Harmony XB4 Harmony XB5 |
| Quantity per set | Set of 1 |
| Button and pilot light accessory type | Mounting support on DIN rail |
| Control button component destination | Command unit |
Complementary
| Characteristic | Value(s) |
|---|---|
| Material | Insulated material |
| 9 mm pitches | 6 |
| Colour code | RAL 9003 |
| Colour tint | White |
| fixing mode | By clips |
| Internal depth | 60 mm |
| Mounting location | Enclosure In cabinet |
| Mounting support | 35 mm symmetrical rail |
| Product weight | 0.04 kg |
This Acti9 iTR safety transformer allows to obtain a very low voltage 8VAC or 12VAC from a network 230VAC. The transformer is safe meaning that primary and secondary circuits are perfectly insulated by each other. The power supply is 4VA. The operating frequency is 50Hz or 60Hz. The primary voltage is 230VAC +/-10%. The secondary voltage output is 8VAC or 12VAC +/-15%. It is resistant to short-circuit currents thanks to the built-in-device. The off load voltage is 16VAC for a 12VAC rated secondary voltage. The on load voltage is 12VAC for a 8VAC rated secondary voltage. It is a Class II device with terminal shield (optional). The bell transformer can be mounted on DIN rail in vertical or horizontal position. The width in 9mm pitches is 4. The degree of protection under IEC 60529 standard is IP20 with terminal shield. The dimensions are (W) 36mm x (H) 89mm x (D) 60mm. The product color is white (RAL9003). The operating temperature is -20°C to 55°C. The storage temperature is -25°C to 80°C. This product complies with IEC/EN 61558-2-6 and EN 60742 standard.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 iTR |
| Product or component type | Transformer |
| Device short name | iTR |
| Transformer type | Bell transformer |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 230 V AC 50/60 Hz |
| Output voltage | 8/12 V: +/- 15 % on load 12/16 V: off load |
| Output short-circuit protection | Built-in |
| Rated power in VA | 4 VA |
| Mounting mode | Fixed |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 4 |
| Height | 89 mm |
| Width | 36 mm |
| Depth | 60 mm |
| Colour | White |
| Auxiliary connection terminal | Tunnel type terminalsrigid 2.5 mm² Tunnel type terminalsflexible 2.5 mm² Tunnel type terminalsflexible with ferrule 2.5 mm² |
| Wire stripping length | 6 mm |
| Tightening torque | 0.5 N.m |
Acti 9 modular bell transfomer iTR - 230 V 50..60 Hz - output 8..12 V - 8 VA
This Acti9 iTR safety transformer allows to obtain a very low voltage 12VAC or 24VAC from a network 230VAC. The transformer is safe meaning that primary and secondary circuits are perfectly insulated by each other. The power supply is 16VA. The operating frequency is 50Hz or 60Hz. The primary voltage is 230VAC +/-10%. The secondary voltage output is 12VAC or 24VAC +/-15%. It is resistant to short-circuit currents thanks to the built-in-device. The off load voltage is 28VAC for a 14VAC rated secondary voltage. The on load voltage is 24VAC for a 12VAC rated secondary voltage. It is a Class II device with terminal shield (optional). The bell transformer can be mounted on DIN rail in vertical or horizontal position. The width in 9mm pitches is 10. The degree of protection under IEC 60529 standard is IP20 with terminal shield. The dimensions are (W) 90mm x (H) 89mm x (D) 60mm. The product color is white (RAL9003). The operating temperature is -20°C to 55°C. The storage temperature is -25°C to 80°C. This product complies with IEC/EN 61558-2-6 and EN 60742 standard.
Main
| Characteristic | Value(s) |
|---|---|
| Transformer type | Safety transformer |
| Range | Acti9 |
| Range of product | Acti9 |
| product name | Acti9 iTR |
| Product or component type | Transformer |
| Device short name | iTR |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 230 V AC 50/60 Hz |
| Output voltage | 12/24 V: +/-5 % on load 14/28 V: off load |
| Output short-circuit protection | Built-in |
| Rated power in VA | 16 VA |
| Temperature derating table | 16 VA 35 °C 15.2 VA 40 °C 12.8 VA 50 °C 9.6 VA 55 °C 7.2 VA 60 °C |
| Mounting mode | Fixed |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 10 |
| Height | 89 mm |
| Width | 90 mm |
| Depth | 60 mm |
| Colour | White |
| Auxiliary connection terminal | Tunnel type terminals 4 mm² |
modular safety transfomer iTR - 230 V 50..60 Hz - output 12..24 V - 25 VA
This Acti 9 iTR 40VA safety transformer allows to obtain a very low voltage 12VAC or 24VAC from a network 230VAC. The transformer is safe meaning that primary and secondary circuits are perfectly insulated by each other. The power supply is 40VA. The operating frequency is 50Hz or 60Hz. The primary voltage is 230VAC +/-10%. The secondary voltage output is 12VAC or 24VAC +/-5%. It is resistant to short-circuit currents thanks to the built-in-device. The off load voltage is 14VAC for a 12VAC rated secondary voltage. The off load voltage is 28VAC for a 24VAC rated secondary voltage. It is a Class II device with terminal shield (optional). The safety transformer should be mounted on DIN rail in vertical position only. The width in 9mm pitches is 10. The weight is 1190g. The degree of protection under IEC 60529 standard is IP20 with terminal shield. The dimensions are (W) 90mm x (H) 89mm x (D) 60mm. The width in modules of 18mm is 5. The operating temperature is -20°C to 55°C. The storage temperature is -25°C to 80°C. This product complies with IEC/EN 61558-2-6 standard.
Main
| Characteristic | Value(s) |
|---|---|
| Transformer type | Safety transformer |
| Range | Acti9 |
| Range of product | Acti9 |
| product name | Acti9 iTR |
| Product or component type | Transformer |
| Device short name | iTR |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 230 V AC 50/60 Hz |
| Output voltage | 12/24 V: +/-5 % on load 14/28 V: off load |
| Output short-circuit protection | Built-in |
| Rated power in VA | 40 VA |
| Temperature derating table | 40 VA 35 °C 38 VA 40 °C 32 VA 50 °C 24 VA 55 °C 18 VA 60 °C |
| Mounting mode | Fixed |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 10 |
| Height | 89 mm |
| Width | 90 mm |
| Depth | 60 mm |
| Colour | White |
| Auxiliary connection terminal | Tunnel type terminals 4 mm² |
modular safety transfomer iTR - 230 V 50..60 Hz - output 12..24 V - 63 VA
DIN socket iPC - 2P+E - 16A - 250VAC - IEC 2316 - italian std
DIN socket iPC - 2P+E - 16A - 250VAC - NFC 15100 - french std
DIN socket iPC -2P+E -16A-250VAC-NFC15100 -french std-with volt.pres.indic.light
This Acti9 iPC product is a modular power socket allow low-voltage device to be connected to the electrical network. It is a standard 16A 2P+E power socket with protective cover on poles. It is compliant with KEMA VDE 0620 german standard. The tightening torque of connection is 1.2N.m for PZ2 screwdriver type. The connection allows rigid copper cables between 1 to 10mm². The connection allows flexible or with ferrule copper cables between 1 to 6mm². The width in 9mm pitches is 5. The product color is white (RAL9003). The dimensions are (W) 45mm x (H) 81mm x (D) 55mm. The weight is 100g. The degree of protection is IP20 at terminals and IP40 in enclosure. The operating temperature is -25°C to +70°C. The storage temperature is -40°C to +80°C. It complies with VDE 0620 standard, UNE_20315-1-1 and NEN 1020.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 iPC |
| Product or component type | Modular socket-outlet |
| Device short name | iPC |
| Poles description | 2P + E |
Complementary
| Characteristic | Value(s) |
|---|---|
| [In] rated current | 16 A |
| [Ue] rated operational voltage | 250 V AC 50/60 Hz |
| Mounting mode | Fixed |
| Mounting support | Symmetrical DIN rail |
| 9 mm pitches | 5 |
| Height | 81 mm |
| Width | 45 mm |
| Depth | 55 mm |
| Product weight | 100 g |
| Colour | White |
| Connections - terminals | Tunnel type terminal1 cable(s) 1â¦6 mm² flexible Tunnel type terminal1 cable(s) 1â¦10 mm² rigid |
| Wire stripping length | 13 mm |
| Tightening torque | 1.2 N.m |
low level interface relay iRBN - 5mA/5VAC-DC - 2A/250VCA - 230VAC
This Acti9 iRTBT product is an extra low voltage relay. The Uc control circuit voltage is 12V to 24V in AC or DC networt type.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Acti9 |
| product name | Acti9 iRTBT |
| Product or component type | Relay |
| Device short name | iRTBT |
| Device application | Extra low voltage interface relay |
| Function available | Actuation of LV circuits based on an extra low voltage order |
| Signal contacts composition | 1 C/O |
| [Uc] control circuit voltage | 12...24 V AC 12...24 V DC |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ie] rated operational current | 5 A at 250 V AC 0.01 A at 10 V DC |
| [Ui] rated insulation voltage | 4000 V |
| Local signalling | LED green for power ON |
| Supply holding power | 0.22 W |
| Supply inrush power | 0.11 W |
| Mounting mode | Fixed |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 2 |
| Colour | White |
| Electrical durability | 100000 cycles |
| Connections - terminals | Tunnel type terminals |
Acti9 20x Screw shield iCT 3-4P 16-25A
This is a set 20 screw shields. set of 10 dedicate to cover the upstream terminals and set of 10 for downstream terminals. It is compatible with 2P Acti9 iCT Contactor with a rated current 40A or 63A.
Main
| Characteristic | Value(s) |
|---|---|
| Product or component type | Screw shield |
| Accessory / separate part category | Insulation accessory |
| Colour | White |
Complementary
| Characteristic | Value(s) |
|---|---|
| Poles description | 2P |
| [In] rated current | 40â¦63 A |
Acti9 20x Screw shield iCT 3-4P 40-63A
Acti9 iC60 RCBO - auxiliary contact - 1OF - AC/DC
This Acti9 SD electrical auxiliary is a fault indicating contact. It is dedicated to iC60, RCBO 1SD iID products. It reports also the electrical fault, actuation of the tripping auxiliary, Open or Closed position of the associated device informations to a programmable logic controller. The width in 9mm pitches is 1. The product color is white (RAL9003). The dimensions are (W) 9mm x (H) 86mm x (D) 71mm. Product weight is 35g. The degree of protection is IP20 at terminals and IP40 in enclosure. This product complies with EN/IEC 60947-5-1 standard.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Fault contact |
| Device short name | iSD |
| Signal contacts composition | 1 C/O |
| [In] rated current | 6 A at 24 V, DC 2 A at 60 V, DC 1.5 A at 110 V, DC 1 A at 250 V, DC 6 A at 24...230 V, AC 50 Hz 3 A at 415 V, AC 50 Hz |
| 9 mm pitches | 1 |
| Standards | EN/IEC 60947-5-1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Height | 86 mm |
| Width | 9 mm |
| Depth | 71 mm |
| Product weight | 35 g |
| Colour | White |
| Connections - terminals | Screw clamp terminal (bottom) 1 cable(s) 0.25â¦4 mm² - rigid Screw clamp terminal (bottom) 1 cable(s) 0.25â¦2.5 mm² - flexible Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - rigid Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - flexible Screw clamp terminal (bottom) 1 cable(s) 2.5 mm² - flexible with ferrule |
| Wire stripping length | 6 mm for bottom connection |
| Tightening torque | 0.6 N.m bottom |
Acti9 IC60 RCBO - auxiliary contact - 1OF/SD - AC/DC
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | OC or fault contact |
| Device short name | iOF+SD 24 |
| Device application | For Smartlink interface |
| Signal contacts composition | 1 C/O |
| [In] rated current | 2â¦100 mA at 24 V, DC |
| 9 mm pitches | 1 |
| Standards | EN/IEC 60947-5-1 EN/IEC 60947-5-4 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Local signalling | Mechanical indicator |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Height | 86 mm |
| Width | 9 mm |
| Depth | 71 mm |
| Product weight | 30 g |
| Colour | White |
| Connections - terminals | Spring-loaded terminal Ti241 cable(s) 0.5â¦1.5 mm² - rigid Spring-loaded terminal Ti241 cable(s) 0.5â¦1.5 mm² - flexible |
| Wire stripping length | 10 mm |
