1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Product or Component Type | Ethernet TCP/IP unmanaged switch |
| Concept | Transparent Ready |
| Communication Port Protocol | Ethernet TCP/IP SSH HTTP HTTPS SNMP SFTP SCP LLDP |
| Port Ethernet | 10BASE-T/100BASE-TX - 8 copper cable |
| Maximum number of switches in cascade | Unlimited |
Complementary
| Characteristic | Value(s) |
|---|---|
| Integrated connection type | Shielded RJ45 copper cable |
| Transmission support medium | Twisted shielded pairs cable CAT 5E copper cable |
| Maximum cable distance between devices | 328.08 ft (100 m) copper cable |
| Ethernet service | SNMP-Traps and SYSLOG |
| Communication Service | Telnet TFTP |
| Redundancy | P1 and P2 redundant power supplies |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 18â¦32 V DC SELV |
| Power Consumption in W | 7 W |
| Electrical connection | Removable connector 5 ways power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Marking | CE |
| Local signalling | for P1 P2 power supplies 2 LEDs for fault 1 LED for Ethernet link active 1 LED per channel |
| Alarm output | 1 voltfree contact 1 A |
| Alarm function | Power supply fault Data link status Switch fault |
| Ethernet cabling system | TF switches |
| Current consumption | 125...290 mA 24 V DC |
| Width | 1.9 in (47 mm) |
| Height | 5.3 in (135 mm) |
| Depth | 4.4 in (111 mm) |
| Product Weight | 0.51 lb(US) (0.23 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Product or Component Type | Ethernet TCP/IP unmanaged switch |
| Concept | Transparent Ready |
| Communication Port Protocol | Ethernet TCP/IP SSH HTTP HTTPS SNMP SFTP SCP LLDP |
| Port Ethernet | 10BASE-T/100BASE-TX - 8 copper cable |
| Maximum number of switches in cascade | Unlimited |
Complementary
| Characteristic | Value(s) |
|---|---|
| Integrated connection type | Shielded RJ45 copper cable |
| Transmission support medium | Twisted shielded pairs cable CAT 5E copper cable |
| Maximum cable distance between devices | 328.08 ft (100 m) copper cable |
| Ethernet service | SNMP-Traps and SYSLOG |
| Communication Service | Telnet TFTP |
| Redundancy | P1 and P2 redundant power supplies |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 18â¦32 V DC SELV |
| Power Consumption in W | 5.4 W |
| Electrical connection | Removable connector 5 ways power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Marking | CE |
| Local signalling | for P1 P2 power supplies 2 LEDs for fault 1 LED for Ethernet link active 1 LED per channel |
| Alarm output | 1 voltfree contact 1 A |
| Alarm function | Data link status Switch fault Power supply fault |
| Ethernet cabling system | TF switches |
| Current consumption | <= 200 mA 24 V DC |
| Width | 1.9 in (47 mm) |
| Height | 5.3 in (135 mm) |
| Depth | 4.4 in (111 mm) |
| Product Weight | 0.73 lb(US) (0.33 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Product or Component Type | Ethernet TCP/IP unmanaged switch |
| Concept | Transparent Ready |
| Communication Port Protocol | Ethernet TCP/IP SSH HTTP HTTPS SNMP SFTP SCP LLDP |
| Port Ethernet | 10BASE-T/100BASE-TX - 8 copper cable |
| Maximum number of switches in cascade | Unlimited |
Complementary
| Characteristic | Value(s) |
|---|---|
| Integrated connection type | Shielded RJ45 copper cable |
| Transmission support medium | Twisted shielded pairs cable CAT 5E copper cable |
| Maximum cable distance between devices | 328.08 ft (100 m) copper cable |
| Ethernet service | SNMP-Traps and SYSLOG |
| Communication Service | Telnet TFTP |
| Redundancy | P1 and P2 redundant power supplies |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 18â¦32 V DC SELV |
| Power Consumption in W | 5.9 W |
| Electrical connection | Removable connector 5 ways power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Marking | CE |
| Local signalling | for P1 P2 power supplies 2 LEDs for fault 1 LED for Ethernet link active 1 LED per channel |
| Alarm output | 1 voltfree contact 1 A |
| Alarm function | Switch fault Data link status Power supply fault |
| Ethernet cabling system | TF switches |
| Current consumption | <= 240 mA 24 V DC |
| Width | 1.9 in (47 mm) |
| Height | 5.3 in (135 mm) |
| Depth | 4.4 in (111 mm) |
| Product Weight | 0.739 lb(US) (0.335 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Product or Component Type | Ethernet TCP/IP unmanaged switch |
| Concept | Transparent Ready |
| Communication Port Protocol | Ethernet TCP/IP SSH HTTP HTTPS SNMP SFTP SCP LLDP |
| Port Ethernet | 10BASE-T/100BASE-TX - 8 copper cable |
| Maximum number of switches in cascade | Unlimited |
Complementary
| Characteristic | Value(s) |
|---|---|
| Integrated connection type | Shielded RJ45 copper cable |
| Transmission support medium | Twisted shielded pairs cable CAT 5E copper cable |
| Maximum cable distance between devices | 328.08 ft (100 m) copper cable |
| Ethernet service | SNMP-Traps and SYSLOG |
| Communication Service | Telnet TFTP |
| Redundancy | P1 and P2 redundant power supplies |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 18â¦32 V DC SELV |
| Power Consumption in W | 5.4 W |
| Electrical connection | Removable connector 5 ways power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Marking | CE |
| Local signalling | for P1 P2 power supplies 2 LEDs for fault 1 LED for Ethernet link active 1 LED per channel |
| Alarm output | 1 voltfree contact 1 A |
| Alarm function | Data link status Switch fault Power supply fault |
| Ethernet cabling system | TF switches |
| Current consumption | <= 200 mA 24 V DC |
| Width | 1.9 in (47 mm) |
| Height | 5.3 in (135 mm) |
| Depth | 4.4 in (111 mm) |
| Product Weight | 0.73 lb(US) (0.33 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Product or Component Type | Ethernet TCP/IP unmanaged switch |
| Concept | Transparent Ready |
| Communication Port Protocol | Ethernet TCP/IP SSH HTTP HTTPS SNMP SFTP SCP LLDP |
| Port Ethernet | 10BASE-T/100BASE-TX - 8 copper cable |
| Maximum number of switches in cascade | Unlimited |
Complementary
| Characteristic | Value(s) |
|---|---|
| Integrated connection type | Shielded RJ45 copper cable |
| Transmission support medium | Twisted shielded pairs cable CAT 5E copper cable |
| Maximum cable distance between devices | 328.08 ft (100 m) copper cable |
| Ethernet service | SNMP-Traps and SYSLOG |
| Communication Service | Telnet TFTP |
| Redundancy | P1 and P2 redundant power supplies |
| [Us] rated supply voltage | 24 V |
| Supply voltage limits | 18â¦32 V DC SELV |
| Power Consumption in W | 5.9 W |
| Electrical connection | Removable connector 5 ways power supply |
| Mounting Support | 35 mm symmetrical DIN rail |
| Marking | CE |
| Local signalling | 2 LEDs for P1 P2 power supplies 1 LED for fault for Ethernet link active 1 LED per channel |
| Alarm output | 1 voltfree contact 1 A |
| Alarm function | Data link status Switch fault Power supply fault |
| Ethernet cabling system | TF switches |
| Current consumption | <= 240 mA 24 V DC |
| Width | 1.9 in (47 mm) |
| Height | 5.3 in (135 mm) |
| Depth | 4.4 in (111 mm) |
| Product Weight | 0.739 lb(US) (0.335 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Twido |
| Product or Component Type | TwidoPort interface module |
| Current consumption | <= 180 mA 5 V |
| [Us] rated supply voltage | 5 V |
| Supply circuit type | DC |
| Product Compatibility | All base controllers version >= 3.0 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Concept | Transparent Ready |
| Integrated connection type | Ethernet TCP/IP RJ45, , 10/100 Mbit/s, 1 twisted pair transparent ready class A10 |
| Port Ethernet | 10BASE-T/100BASE-TX |
| Communication Service | Telnet BOOTP function Modbus messaging Auto MDI/MDX function |
| Supply | Supplied by Twido compact or modular base controller |
| Supply voltage limits | 4.5â¦5.5 V |
| Marking | CE |
| Status LED | 1 LED activity on Ethernet network (ETH ACT) 1 LED activity on the Modbus serial link (SER ACT) 1 LED binary rate 100 Mbit/s (100 MB) 1 LED controller status (STATUS) 1 LED Ethernet link status (LINK) |
| Product Weight | 0.4 lb(US) (0.2 kg) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
52 0399 000 520399000 MODICON CONNECTORS SELF TERMINATING F CONNECTOR, FOR NON QUAD SHIELDED RG 6-U DROP CABLES.
52 0400 000 520400000 MODICON CONNECTORS RG 6-U MALE F CONNECTOR.
52 0401 000 520401000 MODICON CONNECTORS RG 11-U MALE F CONNECTOR.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Tap terminator |
| Accessory / Separate Part Type | Tap terminator |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | Unused drop location |
| Quantity per Set | Set of 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Line impedance for RG-6 coaxial cable |
| Accessory / Separate Part Type | Line impedance |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | RG-6 RIO coaxial cable |
| Product Specific Application | Maintain RIO line on disconnection of cable coming from head adaptor 140CRP93200 |
| Quantity per Set | Set of 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Trunk terminator |
| Accessory / Separate Part Type | Trunk terminator |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | For last tap on the network |
| Quantity per Set | Set of 1 |
52 0488 000 520488000 MODICON CONNECTORS RG 6-U MALE BCN CONNECTOR.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Tap terminator |
| Accessory / Separate Part Type | Tap terminator |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | Unused drop location |
| Quantity per Set | Set of 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Line impedance for RG-6 coaxial cable |
| Accessory / Separate Part Type | Line impedance |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | RG-6 RIO coaxial cable |
| Product Specific Application | Maintain RIO line on disconnection of cable coming from head adaptor 140CRP93200 |
| Quantity per Set | Set of 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Trunk terminator |
| Accessory / Separate Part Type | Trunk terminator |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | For last tap on the network |
| Quantity per Set | Set of 1 |
VigiPacT RH99M is a DIN rail mounting residual current protection relay. It protects against people direct or indirect contact, property fire hazards and motors. It measures the earth leakage current in an electrical installation via its associated toroid. It trips the associated circuit breaker when the set residual operation current is overrun. The operational supply voltage is 12/24VAC 50/60Hz, or 12/48VDC. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. It requires a local manual reset after a fault clearance. The monitored distribution system voltage is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN-rail inside a switchboard and the protection degree is IP40. It must be associated with a compatible Schneider Electric type A toroid or rectangular sensor.
Main
| Characteristic | Value(s) |
|---|---|
| Range | VigiPacT |
| Device short name | RH99M |
| Product or Component Type | Residual current protection relay |
| Relay application | Protection relay |
| Mounting Support | DIN rail |
| Earth-leakage protection class | Type A |
| Type of setting | Selector |
| Residual earth-leakage sensitity adjustment type | Adjustable 9 settings |
| Earth-leakage sensitivity | 0.03â¦30 A |
| Earth-leakage time delay | Instantaneous for 0.03 A Adjustable 9 settings 0â¦4.5 s for 0.03â¦30 A |
| Current sensors compatibility | VigiPacT TOA earth leakage current sensor VigiPacT A earth leakage current sensor VigiPacT L earth leakage current sensor |
| [Ithe] conventional enclosed thermal current | 8 A |
| Minimum load | 10 mA 12 V |
| [Us] rated supply voltage | 12...24 V AC 50/60 Hz 55...120 % 12...48 V DC 55...120 % |
| Power Consumption in VA | 4 VA |
| Monitored distribution system | 1000 V - AC 50/60 Hz maximum) 1000 V - AC 400 Hz maximum) |
| Earthing system | TN-S IT TT |
| [Uimp] rated impulse withstand voltage | 8 kV |
| Reset | Manual reset |
Complementary
| Characteristic | Value(s) |
|---|---|
| Test function | Remote test Local |
| Monitoring | Electronics continuous) Power supply continuous) Relay/sensor link continuous) |
| Type of measurement | Earth fault current internal measurement 80...100 % |
| Tamperproof of settings | Protected by sealable cover |
| Connections - terminals | Auxiliary power supply terminal block 0.0003â¦0.004 in² (0.2â¦2.5 mm²) flexible AWG 24...AWG 12 Auxiliary power supply terminal block 0.0003â¦0.004 in² (0.2â¦2.5 mm²) rigid AWG 24...AWG 12 Auxiliary power supply terminal block 0.0004â¦0.004 in² (0.25â¦2.5 mm²) flexible AWG 24...AWG 12 Fault screw terminal 0.0003â¦0.004 in² (0.2â¦2.5 mm²) flexible AWG 24...AWG 12 Fault screw terminal 0.0003â¦0.006 in² (0.2â¦4 mm²) rigid AWG 24...AWG 12 Fault screw terminal 0.0004â¦0.004 in² (0.25â¦2.5 mm²) flexible AWG 24...AWG 12 Relay test and fault reset screw terminal 0.0002â¦0.002 in² (0.14â¦1 mm²) flexible AWG 26...AWG 16 Relay test and fault reset screw terminal 0.0002â¦0.002 in² (0.14â¦1.5 mm²) rigid AWG 26...AWG 16 Relay test and fault reset screw terminal 0.0004â¦0.0008 in² (0.25â¦0.5 mm²) flexible AWG 26...AWG 16 Sensor screw terminal 0.0002â¦0.002 in² (0.14â¦1 mm²) flexible AWG 26...AWG 16 Sensor screw terminal 0.0002â¦0.002 in² (0.14â¦1.5 mm²) rigid AWG 26...AWG 16 Sensor screw terminal 0.0004â¦0.0008 in² (0.25â¦0.5 mm²) flexible AWG 26...AWG 16 Voltage presence screw terminal 0.0003â¦0.004 in² (0.2â¦2.5 mm²) flexible AWG 24...AWG 12 Voltage presence screw terminal 0.0003â¦0.006 in² (0.2â¦4 mm²) rigid AWG 24...AWG 12 Voltage presence screw terminal 0.0004â¦0.004 in² (0.25â¦2.5 mm²) flexible AWG 24...AWG 12 |
| Wire stripping length | Auxiliary power supply: 0.3 in (7 mm) for top connection Fault: 0.3 in (8 mm) for bottom connection Relay test and fault reset: 0.2 in (5 mm) for bottom connection Sensor: 0.2 in (5 mm) for top connection Voltage presence: 0.3 in (8 mm) for bottom connection |
| Tightening torque | Auxiliary power supply: 5.3 lbf.in (0.6 N.m) top Fault: 5.3 lbf.in (0.6 N.m) bottom Relay test and fault reset: 2.21 lbf.in (0.25 N.m) bottom Sensor: 2.21 lbf.in (0.25 N.m) top Voltage presence: 5.3 lbf.in (0.6 N.m) bottom |
| 9 mm pitches | 6 |
| Standards | EN/IEC 60947-2 Annex M EN/IEC 60755 UL 1053 CAN/CSA C22.2 No. 144 |
| Width | 2.1 in (54 mm) |
| Height | 3.2 in (81 mm) |
| Depth | 2.9 in (74 mm) |
| Product Weight | 0.7 lb(US) (0.3 kg) |
| IP degree of protection | IP40 on front face: conforming to EN/IEC 60529 IP30 on side parts: conforming to EN/IEC 60529 IP20 on connection terminals: conforming to EN/IEC 60529 |
| IK degree of protection | IK07 conforming to EN 50102 |
| Mechanical robustness | Fire resistance IEC 60695-2-1 IK protection 2 joulesIK07 EN 50102 Vibrations 13.2...100 Hz0.7 g Vibrations 2...13.2 Hz+/- 1 mm |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Sepam Series 20 is a protection relay range designed for standard distribution system applications. It provides 7 types of digital current or voltage protection for standard distribution systems, each one dedicated to a single application. The communication interface is enabled with 2 wire RS485 Modbus port protocol. The rated supply voltage is 12 VDC and 24 VDC. The supply current is 16 mA for receiving mode and 40 mA for maximum in sending mode. This device can be fixed on DIN rail. Mechanical dimensions are 88 mm in height, 72 mm in width and 30 mm in depth.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | Sepam series 60 Sepam series 80 Sepam series 40 Sepam series 20 Sepam series 48 Sepam series 80 NPP |
| Device short name | ACE949-2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Communication port protocol | Modbus RTU network: E-LAN interface: RS485 - 2-wire Modbus RTU network: S-LAN interface: RS485 - 2-wire |
| Local signalling | LED for link activity (front face) |
| [Us] rated supply voltage | 12 V DC tolerance: +/- 10 % 24 V DC tolerance: +/- 10 % |
| Maximum supply current | 16 mA: receiving mode 40 mA: maximum in sending mode |
| Mounting mode | Fixed |
| Mounting support | Symmetrical DIN rail |
| Height | 88 mm |
| Width | 72 mm |
| Depth | 30 mm |
| Product weight | 0.1 kg |
| Mechanical robustness | Earthquakes in operation (level: 2) : 1 Gn (vertical axes) conforming to IEC 60255-21-3 Earthquakes in operation (level: 2) : 2 Gn (horizontal axes) conforming to IEC 60255-21-3 Jolts de-energized (level: 2) : 20 Gn/16 ms conforming to IEC 60255-21-2 Shocks de-energized (level: 2) : 27 Gn/11 ms conforming to IEC 60255-21-2 Shocks in operation (level: 2) : 10 Gn/11 ms conforming to IEC 60255-21-2 Vibrations de-energized (level: 2) : 2 Gn, 10 Hz...150 Hz conforming to IEC 60255-21-1 Vibrations in operation (level: 2) : 1 Gn, 10 Hz...150 Hz conforming to IEC 60255-21-1 Vibrations in operation (level: Fc) : 2 Hz...13.2 Hz, a = +/- 1 mm conforming to IEC 60068-2-6 |
| Maximum cable distance between devices | 10 Devices <180 m at 12 V DC 10 Devices <750 m at 24 V DC 20 Devices <160 m at 12 V DC 20 Devices <450 m at 24 V DC 25 Devices <125 m at 12 V DC 25 Devices <375 m at 24 V DC 5 Devices <1000 m at 24 V DC 5 Devices <320 m at 12 V DC |
| Auxiliary connection terminal | Earthing terminal: screw-type connectorcable 2.5â¦50 mm² <0.2 m Earthing terminal: screw-type connectortinned copper braid 6â¦100 mm² |
| Tightening torque | Earthing terminal: 2.2 N.m |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
60 0513 000 600513000 MODICON TERMINATORS 75 W IN LINE TERMINATOR FOR USE WITH THE J890-J892 PROCESSOR.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Accessory / separate part designation | Ground block |
| Accessory / Separate Part Type | Ground block |
| Accessory / separate part category | Connection accessories |
| Quantity per Set | Set of 1 |