Triconex Tricon Expansion Chassis 8111. Expansion chassis providing additional I/O module slots for extending the point count of Tricon safety systems beyond the main chassis capacity. Connected to main chassis via backplane extender.
Triconex Tricon Enhanced Digital Output Module (EDO), 24VDC, 16-point. TMR supervised digital output with enhanced diagnostics, improved response time, and 24VDC sourcing outputs with output readback verification and short-circuit protection. SIL 3 certified per IEC 61508.
Triconex Tricon Power Supply Module Rack 8307A, 24VAC/DC to 120VDC. Power supply and module rack assembly providing 24VAC/DC input power conversion and I/O module mounting slots. Integrated rack with power supply for compact Tricon installations.
Triconex Tricon Digital Output Module 3674, 24VDC. TMR digital output with specialized output configuration for specific safety application requirements. 24VDC sourcing with per-channel diagnostics. SIL 3 certified.
Triconex Tricon Pulse Input Module (PI) 3511. TMR pulse input for high-speed frequency and speed measurement applications. Supports multiple counting modes, programmable filtering, and direction detection for turbine speed, flow metering, and encoder feedback. SIL 3 certified.
Triconex Tricon Highway Interface Module (HIM) 4500. Provides communication interface to Honeywell TDC 3000 or Experion Data Hiway for integrating Tricon safety systems with Honeywell DCS platforms.
Triconex Main Processor Module (MP), Motorola MPC860 32-bit 50MHz. High-performance TMR processor for Tricon V10 safety controllers with 16MB DRAM, 32KB SRAM, dual Ethernet ports, and USB connectivity. Supports up to 24,000 I/O points, 50ms typical scan time, online changes, and TriStation 1131 programming. SIL 3 certified per IEC 61508/61511.
Triconex Tricon Power Supply Module 8301A, 24VDC. DC-input power supply for Tricon systems powered from 24VDC battery-backed sources. Redundant configuration capability with power-good monitoring.
Triconex Tricon Enhanced Digital Input Module (EDI) 3505E. TMR digital input module with specialized input specifications for particular field device configurations. Optical isolation, wire-break detection. SIL 3 certified.
Triconex Digital Output High-Current Baseplate (DOHC) 2401H. Heavy-duty mounting baseplate for Tricon digital output modules with increased current rating for higher-power output applications.
Triconex Tricon Communication Module (TCM) 4351A, 2x Ethernet, 4x Serial. Enhanced communication module with dual 10/100 Ethernet ports and four serial ports for flexible connectivity to DCS, SCADA, HMI, and field devices. Supports Modbus TCP/IP, OPC, and serial Modbus RTU/ASCII.
Triconex Tricon Communication Module (TCM) 4352B, enhanced. Latest firmware revision communication module with dual Ethernet, serial ports, Modbus TCP/IP, OPC, and enhanced cybersecurity hardening.
Triconex Tricon Analog Input Module (AI), 0-5VDC, 32-point, differential, DC-coupled. TMR analog input with 12-bit A/D conversion, per-channel open/short detection, and differential inputs for noise rejection. Used for 4-20mA (with external resistor) and 0-5V process signals. SIL 3 certified.
Triconex Tricon Supervised Digital Input Module (DI) 3506X, 24VDC. TMR digital input with supervised line monitoring capability to detect wiring faults (open and short circuits) on each input channel for enhanced safety integrity. SIL 3 certified.
Triconex Tricon Enhanced Digital Output Module (EDO) 3607E, 48VDC. TMR supervised digital output for 48VDC loads with output readback verification and load-line monitoring. SIL 3 certified.
1 year warranty