ControlLogix EtherNet/IP Interface Module, Dual Port 10/100 Mbps; Supports 128 TCP/IP connections, up to 8 axis, Ring and Linear topologies
EtherNet/IP Tap, 3-Port 10/100 Mbps Copper full or half duplex, 24V DC Power, enable single port devices to connect to a ring or linear topology
EtherNet/IP Tap, 1-Port 10/100 Mbps Copper (Full or Half Duplex) and 2-Port 100Base-FX Multimode Fiber (LC connector), 24V DC Power
ControlLogix Current Analog Input Module with HART Protocol, 16 Differential Current Inputs 0-20mA, 4-20mA; Dedicated HART Modem per Channel
ControlLogix Analog Output HART Current/Voltage Module, 8 Points (20 Pin)
ControlLogix Analog Input Module, Current/Voltage, 8 Isolated Points, 36-Pin; 24-bit Resolution, uses Differential Inputs; with Notch Filter, software user-configurable selection for an internal loop power source on each channel
GuardLogix Logix5572S Processor with 4MB Standart Memory and 2MB of Safety Memory, 1 x Built-in USB Port and Energy Storage Module (ESM), for use in applications with SIL 3/PLe/Cat. 4
ControlLogix Analog Output Module, Current/Voltage, 8 Isolated Points (36 Pin)
Controller, GuardLogix 5580 with 5 MB Standard Memory, 2.5 MB Safety Memory, USB Port, 1GB Embedded Ethernet Port, 175 EtherNet/IP Devices, 4 Character Alpha/Numeric Display
GuardLogix 5580 Safety Controller, 3MB Standard Memory and 1.5MB Safety Memory, USB 2.0 Port (12 Mbps), 1GB Ethernet Port, 100 EtherNet/IP Devices, 32 Tasks, 1000 Programs/Task, 4 Character Alpha/Numeric Display, Supported in Studio 5000 Automation Engineering & Design Environment
ControlLogix Analog Differential Input w/HART, Current/Voltage, 8-Points (36 Pin); Choice of three data formats; Multiple current and voltage input ranges; Module filter; Real time sampling; Under range and over range detection; Process alarms; Rate alarm; Wire-off detection; Highway addressable remote transducer (HART) communication
USB-to-Data Highway Plus Adapter with Cable for programming PLC-5 or SLC 5/04 processors using a personal computer and RSLogix 5 or 500 Programming Software; lets a DH+ host with RSLinx software communicate directly with DH+ stations; performs the same functions as the 1784-PCMK
ControlLogix Redundancy Module, Single Channel (1 Transmit and 1 Receive Fiber), up to 10km and up to 1000 Mbps Max, can be used in ControlLogix SIL2 applications
GuardLogix Logix5571S Processor with 2MB Standart Memory and 1MB of Safety Memory, 1 x Built-in USB Port and Energy Storage Module (ESM), for use in applications with SIL 3/PLe/Cat. 4
