discrete I/O extension module - 6 I O - 24 V AC - for Zelio Logic
discrete I/O extension module - 6 I O - 24 V DC - for Zelio Logic
discrete I/O extension module - 6 I O - 100..240 V AC - for Zelio Logic
discrete I/O extension module - 6 I O - 12 V DC - for Zelio Logic
standard analog input kit STB - 4..20 mA - 4 I - 15 bits + sign
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs (current 4mA to 20mA) with 10bit resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. The response time is 5ms. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height). It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBXTS1100, 6-terminal screw type connector, STBXBA1000 base, STBXTS2100, 6-terminal spring clamp connector and STBACI1225 module. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Basic analog input kit |
| Kit composition | STBXTS1100, 6-terminal screw type connector STBXBA1000 base STBXTS2100, 6-terminal spring clamp connector STBACI1225 module |
| Analogue input type | Current 4...20 mA |
| Analogue input number | 2 |
| Analogue input resolution | 10 bits |
| Type of filter | Single low pass input filter 25 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Absolute maximum input | 25 mA/50 V DC |
| Response Time | 5 ms |
| Cold swapping | Yes |
| Hot swapping fallback | No for basic NIMs |
| Data format | EN 61131-2 IEC 61131-2 |
| Update time | 10 ms |
| Integral linearity | +/- 0.2 %FS |
| Differential linearity | Monotonic |
| Input impedance | <= 300 Ohm |
| Maximum supply current for sensors | 100 mA per input channels |
| Absolute accuracy error | +/- 0.5 % of full scale 25 °C |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and sensor bus | 30 V |
| Addressing requirement | 2 input words |
| Product Compatibility | Mounting base STBXBA1000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 30 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) |
| Depth | 2.8 in (70 mm) |
| Height | 0.5 in (13.9 mm) |
| Width | 5.05 in (128.3 mm) |
standard analog input kit STB - 0..20 mA - 2 I - 12 bits
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard analog input module |
| Analogue input type | Current 0...20 mA Current 4...20 mA |
| Analogue input number | 8 |
| Analogue input resolution | 15 bits + sign |
| Type of filter | Single low pass input filter 985 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Absolute maximum input | 25 mA |
| Cold swapping | Yes |
| Hot swapping fallback | Yes for standard NIMs |
| Fallback status | State 0 basic NIMs User configurable standard NIMs |
| Data format | EN 61131-2 IEC 61131-2 |
| Update time | 22 ms |
| Integral linearity | +/- 0.08 %FS |
| Differential linearity | Monotonic |
| Input impedance | <= 250 Ohm |
| Maximum supply current for sensors | 100 mA per input channels |
| Absolute accuracy error | +/- 0.4 % of full scale per °C |
| Temperature Drift | +/-0.005 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and sensor bus | 30 V |
| Addressing requirement | 16 input words |
| Product Compatibility | Power distribution module STBPDT3100/3105 Mounting base STBXBA2000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 90 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) |
| Depth | 2.8 in (70 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 5.05 in (128.3 mm) |
standard analog input kit STB - 4..20 mA - 8 I - 15 bits + sign
standard analog input kit STB - 4..20 mA - 4 I - 15 bits + sign
standard analog output kit, Modicon STB, 4 to 20mA, 2O, 15 bits with sign
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard analog output module |
| Analogue output type | Current 0...20 mA |
| Analogue output number | 2 |
| Analogue output resolution | 12 bits |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue output current | 0.02 A |
| Response Time | 3 ms |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Data format | IEC 61131-2 EN 61131-2 |
| Update time | 25 ms |
| Conversion time | 900 ms at +/- 0.1 % of final value |
| Protection Type | Short-circuit protection |
| Integral linearity | +/- 0.1 %FS |
| Differential linearity | Monotonic |
| Absolute accuracy error | +/- 0.5 % of full scale per °C |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and actuator bus | 30 V |
| Addressing requirement | 2 output words 1 word for configuring fallback status |
| Product Compatibility | Power distribution module STBPDT3100/3105 Mounting base STBXBA1000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 40 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED (Red) module error (ERR) |
| Depth | 2.8 in (70 mm) |
| Height | 0.5 in (13.9 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.258 lb(US) (0.117 kg) |
basic analog output kit STB - 4..20 mA - 2 O - 10 bits
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard analog output kit |
| Kit composition | STBACO8220 module STBXBA2000 base STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector |
| Analogue output type | Current 4...20 mA |
| Analogue output number | 2 |
| Analogue output resolution | 15 bits + sign |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue output current | 0.02 A |
| Response Time | 40 ms plus update time |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Data format | EN 61131-2 IEC 61131-2 |
| Update time | 8 ms |
| Integral linearity | +/- 0.05 %FS |
| Differential linearity | Monotonic |
| Absolute accuracy error | +/- 0.3 % of full scale 77 °F (25 °C) |
| Temperature Drift | +/-0.005 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and actuator bus | 200 V |
| Product Compatibility | Power distribution module STBPDT3100/3105 Mounting base STBXBA1000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 210 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED (Red) module error (ERR) |
| Depth | 2.8 in (70 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 5.05 in (128.3 mm) |
standard analog input kit STB - 2 I - 15 bits + sign
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 2 analogue inputs (voltage 0V to 10V) with 10bit resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 30mA at 5V DC for logic bus. It is an IP20 rated product. It weighs 0.116kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBAVI1255 module, STBXTS2100, 6-terminal spring clamp connector, STBXTS1100, 6-terminal screw type connector and STBXBA1000 base. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Basic analog input kit |
| Kit composition | STBAVI1255 module STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector STBXBA1000 base |
| Analogue input type | Voltage 0...10 V |
| Analogue input number | 2 |
| Analogue input resolution | 10 bits |
| Type of filter | Single low pass input filter 25 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Absolute maximum input | 50 V DC |
| Response Time | 5 ms |
| Cold swapping | Yes |
| Hot swapping fallback | No for basic NIMs |
| Data format | EN 61131-2 IEC 61131-2 |
| Update time | 10 ms |
| Integral linearity | +/- 0.2 %FS |
| Differential linearity | Monotonic |
| Input impedance | 400 kOhm |
| Maximum supply current for sensors | 100 mA per input channels |
| Maximum source impedance | 1 kOhm |
| Absolute accuracy error | +/- 0.5 % of full scale 25 °C |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and sensor bus | 30 V |
| Addressing requirement | 2 input words |
| Product Compatibility | Mounting base STBXBA1000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 30 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) |
| Product Weight | 0.256 lb(US) (0.116 kg) |
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 8 analogue inputs (voltage ±10V, ±5V, 0V to 10V, 0V to 5V, 1V to 5V) with 15bit plus sign resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 90mA at 5V DC for logic bus. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBXBA1000 base, STBAVI1400 module, STBXTS2100, 6-terminal spring clamp connector and STBXTS1100, 6-terminal screw type connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard analog input kit |
| Kit composition | STBXBA1000 base STBAVI1400 module STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector |
| Analogue input type | Voltage +/- 10 V Voltage +/- 5 V Voltage 0...10 V Voltage 0...5 V Voltage 1...5 V |
| Analogue input number | 8 |
| Analogue input resolution | 15 bits + sign |
| Type of filter | Single low pass input filter 25 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Absolute maximum input | 50 V DC |
| Cold swapping | Yes |
| Hot swapping fallback | Yes for standard NIMs |
| Fallback status | State 0 basic NIMs User configurable standard NIMs |
| Data format | IEC 61131-2 EN 61131-2 |
| Update time | 22 ms |
| Integral linearity | +/- 0.2 %FS |
| Differential linearity | Monotonic |
| Input impedance | 400 kOhm |
| Maximum supply current for sensors | 100 mA per input channels |
| Maximum source impedance | 1 kOhm |
| Absolute accuracy error | +/- 0.75 % of full scale 25 °C |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and sensor bus | 30 V |
| Addressing requirement | 2 input words |
| Product Compatibility | Power distribution module STBPDT3100/3105 Mounting base STBXBA1000 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 90 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED (Red) module error (ERR) |
This output kit is part of the Modicon STB range, an offer of IP20 modular distributed I/Os on multiple networks and fieldbus. This standard analog output kit is an accessory kit for programmable logic controllers (PLC) and programmable automation controllers (PAC). It has 2 analog output (voltage 0V to 10V) with 10bit plus sign resolution. This product is compatible with most major Fieldbus networks. It is an analog input kit with a rated supply voltage of 24V DC and a current consumption of 45mA at 5V DC for logic bus. It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 13.9mm (height). It weighs 0.116kg. It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines. This product is certified by CE, FM Class 1 Division 2, CSA and UL. It is compatible with mounting base STBXBA1000 and power distribution module STBPDT3100/3105. The kit includes STBXTS2100, 6-terminal spring clamp connector, STBAVO1255 module, STBXBA1000 base and STBXTS1100, 6-terminal screw type connector. Advantys distributed I/O solutions are simple, open and flexible, meeting needs in every stage of the product life cycle. For distributed connection to sensors and actuators from a PLC with prefabricated cables.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Basic analog output kit |
| Kit composition | STBXTS1100, 6-terminal screw type connector STBXBA1000 base STBAVO1255 module STBXTS2100, 6-terminal spring clamp connector |
| Analogue output type | Voltage 0...10 V |
| Analogue output number | 2 |
| Analogue output resolution | 10 bits |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue output current | 0.005 A |
| Response Time | 3 ms |
| Cold swapping | Yes |
| hot swapping | No for basic NIMs |
| fallback | State 0 |
| Data format | IEC 61131-2 EN 61131-2 |
| Update time | 25 ms |
| Protection Type | Short-circuit protection |
| Integral linearity | +/- 0.1 %FS |
| Differential linearity | Monotonic |
| Absolute accuracy error | +/- 0.5 % of full scale 77 °F (25 °C) |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and actuator bus | 30 V |
| Addressing requirement | 2 output words |
| Product Compatibility | Mounting base STBXBA1000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 45 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) |
| Depth | 2.8 in (70 mm) |
| Height | 0.5 in (13.9 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.256 lb(US) (0.116 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Basic analog output kit |
| Kit composition | STBAVO1265 module STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector STBXBA1000 base |
| Analogue output type | Voltage +/- 10 V |
| Analogue output number | 2 |
| Analogue output resolution | 9 bits + sign |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue output current | 0.005 A |
| Response Time | 3 ms |
| Cold swapping | Yes |
| hot swapping | No for basic NIMs |
| fallback | State 0 |
| Data format | IEC 61131-2 EN 61131-2 |
| Update time | 25 ms |
| Protection Type | Short-circuit protection |
| Integral linearity | +/- 0.1 %FS |
| Differential linearity | Monotonic |
| Absolute accuracy error | +/- 0.5 % of full scale 77 °F (25 °C) |
| Temperature Drift | +/-0.01 %/°C |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Insulation between channels and actuator bus | 30 V |
| Addressing requirement | 2 output words |
| Product Compatibility | Mounting base STBXBA1000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 45 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) |
| Depth | 2.8 in (70 mm) |
| Height | 0.5 in (13.9 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.254 lb(US) (0.115 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital input kit |
| Kit composition | STBXTS2110, 5-terminal spring clamp connector STBXBA2000 base STBXTS1110, 5-terminal screw type connector STBDAI5230 module |
| Discrete input number | 2 |
| Discrete input voltage | 115 V |
| Discrete input voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 0...20 V at state 0 74...132 V at state 1 |
| Acceptable Input Voltage | 132 V |
| Absolute maximum voltage | 200 V 20 ms |
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47â¦63 Hz |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 4 mA |
| Response time | 1.5 ms off-to-on 1.5 ms on-to-off |
| Protection type | Power protection integrated fuse on PDM time lag 10 A Input protection resistor-limited |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| Current supplied by sensor | <= 60 mA per channel |
| Product Compatibility | I/O base STBXBA2000 Power distribution module STBPDT2100/2105 |
| [Us] rated supply voltage | 115/230 V AC |
| Supply | Power distribution module |
| Current consumption | 40 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (IN1 to IN2) 1 LED (Red) module error (ERR) |
| Depth | 2.6 in (65.1 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.26 lb(US) (0.12 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital input kit |
| Kit composition | STBXTS1110, 5-terminal screw type connector STBXTS2110, 5-terminal spring clamp connector STBXBA2000 base STBDAI5260 module |
| Discrete input number | 2 |
| Discrete input voltage | 115 V |
| Discrete input voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 0...20 V at state 0 74...132 V at state 1 |
| Acceptable Input Voltage | 132 V |
| Absolute maximum voltage | 200 V 20 ms |
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47â¦63 Hz |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 4 mA |
| Discrete input logic | Positive or negative |
| Response time | 1.5 ms off-to-on 1.5 ms on-to-off |
| Protection type | Input protection metal oxide varistor limited Power protection external fuse 0.5 A |
| Insulation between channels | 1780 V for 1 minute |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| Product Compatibility | I/O base STBXBA2000 Power distribution module STBPDT2100/2105 |
| [Us] rated supply voltage | 115/230 V AC |
| Supply | Power distribution module |
| Current consumption | 45 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (IN1 to IN2) 1 LED (Red) module error (ERR) |
| Depth | 2.6 in (65.1 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.143 lb(US) (0.065 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital input kit |
| Kit composition | STBXTS1110, 5-terminal screw type connector STBDAI7220 module STBXTS2110, 5-terminal spring clamp connector STBXBA2000 base |
| Discrete input number | 2 |
| Discrete input voltage | 230 V |
| Discrete input voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage limits | 0...40 V at state 0 159...256 V at state 1 |
| Acceptable Input Voltage | 265 V |
| Absolute maximum voltage | 400 V 20 ms |
| Network Frequency | 50/60 Hz |
| Network frequency limits | 47â¦63 Hz |
| Current state 0 guaranteed | <= 2 mA |
| Current state 1 guaranteed | >= 4 mA |
| Response time | 1.5 ms off-to-on 1.5 ms on-to-off |
| Protection type | Power protection integrated fuse on PDM time lag 10 A Input protection resistor-limited |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| Product Compatibility | Power distribution module STBPDT2100/2105 I/O base STBXBA2000 |
| [Us] rated supply voltage | 115/230 V AC |
| Supply | Power distribution module |
| Current consumption | 40 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (IN1 to IN2) 1 LED (Red) module error (ERR) |
| Depth | 2.6 in (65.1 mm) |
| Height | 0.7 in (18.4 mm) |
| Width | 4.9 in (125 mm) |
| Product Weight | 0.269 lb(US) (0.122 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital output kit |
| Kit composition | STBXBA2000 base STBDAO5260 module STBXTS1100, 5-terminal screw type connector STBXTS2110, 5-terminal spring clamp connector |
| Discrete output number | 2 |
| Discrete output type | Triac |
| Discrete output voltage | 115 V |
| Discrete output voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output current | 1000 mA 140 °F (60 °C) 2000 mA 86 °F (30 °C) |
| Discrete output logic | Positive or negative |
| Output voltage | 74....132 V AC |
| Absolute maximum voltage | 132 V |
| Response Time | 10 ms off-to-on 10 ms on-to-off |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Protection type | Output surge protection external fuse 5 A |
| Insulation between channels | 1780 V for 1 minute |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Maximum leakage current | 2 mA at state 0 132 V |
| Surge current | 20 A 40 ms 30 A 20 ms |
| Minimum load | 1 mA |
| Reset | Manual or automatic reset COM fault |
| Product Compatibility | Power distribution module STBPDT2100/2105 I/O base STBXBA2000 |
| Supply | Power distribution module |
| Current consumption | 70 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (OUT1 to OUT2) 1 LED (Red) module error (ERR) |
| Height | 0.7 in (18.4 mm) |
| Depth | 2.8 in (70 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.148 lb(US) (0.067 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon STB distributed I/O solution |
| Product or Component Type | Standard digital output kit |
| Kit composition | STBXTS1100, 5-terminal screw type connector STBDAO8210 module STBXTS2110, 5-terminal spring clamp connector STBXBA2000 base |
| Discrete output number | 2 |
| Discrete output type | Triac |
| Discrete output voltage | 115...230 V |
| Discrete output voltage type | AC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Discrete output current | 1000 mA 140 °F (60 °C) 2000 mA 86 °F (30 °C) |
| Discrete output logic | Positive or negative |
| Output voltage | 20...265 V AC |
| Absolute maximum voltage | 300 V 10 s 400 V 20 ms |
| Response Time | 10 ms off-to-on 10.5 ms on-to-off |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| fallback | State 0 basic NIMs User configurable standard NIMs |
| Protection type | Output surge protection varistance and RC circuit |
| Insulation between channels and logic bus | 1780 V for 1 minute |
| Maximum leakage current | 2 mA at state 0 115 V 2.5 mA at state 0 230 V |
| Surge current | 20 A 40 ms 30 A 20 ms |
| Minimum load | 5 mA |
| Reset | Manual or automatic reset COM fault |
| Product Compatibility | I/O base STBXBA2000 Power distribution module STBPDT2100/2105 |
| Supply | Power distribution module |
| Current consumption | 45 mA 5 V DC logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (OUT1 to OUT2) 1 LED (Red) module error (ERR) |
| Height | 0.7 in (18.4 mm) |
| Depth | 2.8 in (70 mm) |
| Width | 5.05 in (128.3 mm) |
| Product Weight | 0.276 lb(US) (0.125 kg) |
Modules