Marking / Coding

Showing 1 - 24 of 202 products

€0,00

Sold Out

Specifications

Model				OP-87384
Type				External Camera Mount Cover
Overview				This is a head cover for use when a KEYENCE XG Series image processing camera is attached to the MD-T1000 Series.
Applicable product				XG-H500C/XG-H500M/XG-H200C/XG-H200M/XG-200C/XG-200M/XG-H100C/XG-H100M/XG-H035C/XG-H035M
Number included				1 unit

Keyence OP-87378 Keyence

€0,00

Sold Out

Specifications

Model				OP-87378
Overview				High-accuracy glass scale for MD-T1000 Series position accuracy correction.
Applicable product				MD-T1000 Series
Number included				1 unit
Note				This glass scale is used for grid scale calibration in Laser Scanning Calibrator 2.

Keyence OP-87377 Keyence

€0,00

Sold Out

Specifications

Model				OP-87377
Type				Air filter set (controller/head)
Applicable product				MD-T1000 Series
Number included				For the head/controller, 1 unit for each

Keyence OP-87369 Keyence

€0,00

Sold Out

Specifications

Model				OP-87369
Type				External protective glass
Applicable product				MD-T1000 Series
Number included				1 sheet of glass
Note				Installing this optional accessory eliminates the need to perform maintenance such as optical lens cleaning. Use this optional accessory when you want to achieve stable operation that is not affected by the surrounding environment.

Keyence OP-66843 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MD-T1010W Keyence

€0,00

Sold Out

Specifications

Model		MD-T1010W
Type		Main unit (head)
PC software		MB-H2D3-DVD Supported OS^1: Windows 10/7/Vista (SP1 or higher)/XP (SP3 or higher), Supported languages: Japanese/English/Chinese^2/German
PC software (Logo designer)		MB-HLD Supported OS : Windows 7/Vista (SP1 or higher) /XP (SP3 or higher), Supported languages: Japanese/English/Chinese^*2/German
Console		MC-P1
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3)
	Wavelength	532 nm
	Output	4W (at 30kHz)
Guide laser		Semiconductor laser, Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3), Wavelength 655nm, Output 1.0mW
Marking area		80 x 80 mm 3.15" x 3.15"
Standard working distance		189 mm 7.44"
Q-switch frequency		1 to 400kHz
Spot variable width		±5 mm ±0.20"
Marking resolution		2 µm 0.08 Mil
Scan speed		Max. 12000 mm/s
Character type	Font	Original fonts (numbers, alphabet, Katakana, Hiragana, Kanji)/user fonts/True Type fonts/ Dot font (SEMI single-density/SEMI double-density)
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128
	2D code	QR code /Micro QRcode/DataMatrix (ECC200)/GS1 DataMatrix
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image	Custom character font/logo data DXF/BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/circle/oval
	Trimming	Single cut/L-shaped cut/multi-plunge/serpentine/free line/specify end point/relative shift
Marking conditions	Workpiece style	Stationary marking
	Character size (marking height/width)	0.01 to 80 mm 0.0004" to 3.15"
	No. of registered programs	Max. 2000 programs
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O/MIL connector I/O
Interface		RS-232C/RS-422A/USB2.0^*4 /Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*5 only
Head installation direction		Up and down (vertical)
Head cable length		5 m 16.4'
Cooling method		Air cooling, thermoelectric cooling
Rating	Power voltage	100 to 120 VAC/200 to 240 VAC, 50/60 Hz
	Power consumption	550 VA max.
Environmental resistance	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	+15 to +35 °C 59 to 95 °F
	Relative humidity	30 to 85 % RH (No condensation)
Weight		Marking head unit: 35 kg Console: 2.0 kg
^1 For Windows 10/7/Vista, the 32-bit or 64-bit versions are supported, for XP only the 32-bit version is supported. Windows is a registered trademark of Microsoft Corporation, U.S.A. ^2 For Chinese, simplified Chinese display is supported and Chinese input is not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 Port dedicated for PC software ^*5 SanDisk cards are recommended.

Keyence MD-T1000W Keyence

€0,00

Sold Out

Specifications

Model		MD-T1000W
Type		Main unit (controller)
PC software		MB-H2D3-DVD Supported OS^1: Windows 10/7/Vista (SP1 or higher)/XP (SP3 or higher), Supported languages: Japanese/English/Chinese^2/German
PC software (Logo designer)		MB-HLD Supported OS : Windows 7/Vista (SP1 or higher) /XP (SP3 or higher), Supported languages: Japanese/English/Chinese^*2/German
Console		MC-P1
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3)
	Wavelength	532 nm
	Output	4W (at 30kHz)
Guide laser		Semiconductor laser, Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10 ^*3), Wavelength 655nm, Output 1.0mW
Marking area		80 x 80 mm 3.15" x 3.15"
Standard working distance		189 mm 7.44"
Q-switch frequency		1 to 400kHz
Spot variable width		±5 mm ±0.20"
Marking resolution		2 µm 0.08 Mil
Scan speed		Max. 12000 mm/s
Character type	Font	Original fonts (numbers, alphabet, Katakana, Hiragana, Kanji)/user fonts/True Type fonts/ Dot font (SEMI single-density/SEMI double-density)
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128
	2D code	QR code /Micro QRcode/DataMatrix (ECC200)/GS1 DataMatrix
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image	Custom character font/logo data DXF/BMP/JPEG/PNG/TIF
	Machinery operation	Fixed point/straight line/dashed line/circle/oval
	Trimming	Single cut/L-shaped cut/multi-plunge/serpentine/free line/specify end point/relative shift
Marking conditions	Workpiece style	Stationary marking
	Character size (marking height/width)	0.01 to 80 mm 0.0004" to 3.15"
	No. of registered programs	Max. 2000 programs
	No. of program blocks	256 blocks
I/O (Input/output)		Terminal block I/O/MIL connector I/O
Interface		RS-232C/RS-422A/USB2.0^*4 /Ethernet (100BASE-TX/10BASE-T)
CF memory card slot		Compact flash memory card^*5 only
Head installation direction		Up and down (vertical)
Head cable length		5 m 16.4'
Cooling method		Air cooling, thermoelectric cooling
Rating	Power voltage	100 to 120 VAC/200 to 240 VAC, 50/60 Hz
	Power consumption	550 VA max.
Environmental resistance	Ambient temperature for storage	-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature	+15 to +35 °C 59 to 95 °F
	Relative humidity	30 to 85 % RH (No condensation)
Weight		Controller: 23 kg Console: 2.0 kg
^1 For Windows 10/7/Vista, the 32-bit or 64-bit versions are supported, for XP only the 32-bit version is supported. Windows is a registered trademark of Microsoft Corporation, U.S.A. ^2 For Chinese, simplified Chinese display is supported and Chinese input is not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 Port dedicated for PC software ^*5 SanDisk cards are recommended.

Keyence OP-80107 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-84490 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence MB-HDX Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence ML-Z9550W Keyence

€10.138,95

Only 1 unit left

Specifications

Model			ML-Z9550W
Type			Thin laser beam (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			50 x 50 x 4 mm 1.97" x 1.97" x 0.16"
Basic working distance (±variation width)			92 mm 3.62" (±2 mm ±0.83")
Marking resolution			1 µm 0.04 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.1 to 50 mm 0.004" to 1.97"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9550TW Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9550TW
Type			Thin laser beam (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			50 x 50 x 4 mm 1.97" x 1.97" x 0.16"
Basic working distance (±variation width)			92 mm 3.62" (±2 mm ±0.83")
Marking resolution			1 µm 0.04 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.1 to 50 mm 0.004" to 1.97"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9550TA Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9550TA
Type			Marking head unit: Thin laser beam
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			50 × 50 × 4 mm 1.97" × 1.97" × 0.16"
Basic working distance (±variation width)			92 mm 3.62" (±2 mm ±0.08")
Marking resolution			1 µm 0.04 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.1 to 50 mm 0.004" to 1.97"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9550A Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9550A
Type			Marking head unit: Thin laser beam
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			50 × 50 × 4 mm 1.97" × 1.97" × 0.16"
Basic working distance (±variation width)			92 mm 3.62" (±2 mm ±0.08")
Marking resolution			1 µm 0.04 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.1 to 50 mm 0.004" to 1.97"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9520W Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9520W
Type			Wide area type (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			300 x 300 x 42 mm 11.81" x 11.81" x 1.65"
Basic working distance (±variation width)			300 mm (±21 mm) 11.81" (±0.83")
Marking resolution			5 µm 0.20 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.3 to 300 mm 0.012" to 11.81"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.2 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9520TW Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9520TW
Type			Wide area type (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			300 x 300 x 42 mm 11.81" x 11.81" x 1.65"
Basic working distance (±variation width)			300 mm (±21 mm) 11.81" (±0.83")
Marking resolution			5 µm 0.20 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.3 to 300 mm 0.012" to 11.81"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.2 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9520TA Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9520TA
Type			Marking head unit: Wide area type
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			300 × 300 × 42 mm 11.81" × 11.81" × 1.65"
Basic working distance (±variation width)			300 mm 11.81" (±21 mm ±0.83")
Marking resolution			5 µm 0.20 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.3 to 300 mm 0.012" to 11.81"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.2 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9520A Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9520A
Type			Marking head unit: Wide area type
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			300 × 300 × 42 mm 11.81" × 11.81" × 1.65"
Basic working distance (±variation width)			300 mm 11.81" (±21 mm ±0.83")
Marking resolution			5 µm 0.20 Mil
Scan speed			6000 mm 19.69'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.3 to 300 mm 0.012" to 11.81"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.2 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9510W Keyence

€7.634,95

Only 1 unit left

Specifications

Model			ML-Z9510W
Type			Standard model (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			120 x 120 x 42 mm 4.72" x 4.72" x 1.65"
Basic working distance (±variation width)			189 mm (±21 mm) 7.44" (±0.83")
Marking resolution			2 µm 0.08 Mil
Scan speed			12000 mm 39.37'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.2 to 120 mm 0.008" to 4.72"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9510TW Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9510TW
Type			Standard model (Marking head unit)
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*4
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			120 x 120 x 42 mm 4.72" x 4.72" x 1.65"
Basic working distance (±variation width)			189 mm (±21 mm) 7.44" (±0.83")
Marking resolution			2 µm 0.08 Mil
Scan speed			12000 mm 39.37'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		Stationary marking/movement marking (constant speed/encoder)
	Character size (height × width)		0.2 to 120 mm 0.008" to 4.72"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*5
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*6
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Laser tube monolithic output ^5 Port dedicated for PC software ^6 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9510TA Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9510TA
Type			Marking head unit: Standard model
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		9.3 µm 0.37 Mil
	Output		20 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			120 × 120 × 42 mm 4.72" × 4.72" × 1.65"
Basic working distance (±variation width)			189 mm 7.44" (±21 mm ±0.83")
Marking resolution			2 µm 0.08 Mil
Scan speed			12000 mm 39.37'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.2 to 120 mm 0.008" to 4.72"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9510A Keyence

€0,00

Sold Out

Specifications

Model			ML-Z9510A
Type			Marking head unit: Standard model
Controller			ML-Z9500A
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		10.6 µm 0.42 Mil
	Output		30 W^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			120 × 120 × 42 mm 4.72" × 4.72" × 1.65"
Basic working distance (±variation width)			189 mm 7.44" (±21 mm ±0.83")
Marking resolution			2 µm 0.08 Mil
Scan speed			12000 mm 39.37'/s max.
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.2 to 120 mm 0.008" to 4.72"
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			16.1 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Keyence ML-Z9500W Keyence

€8.862,95

Only 3 units left

Specifications

Model			ML-Z9500W
Type			Controller
Marking head unit			ML-Z9510W
Console (Color touch panel)			MC-P1
PC software (MARKING BUILDER2)			MB-H2D3-DVD/MB-H3D2 Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Laser marker setting software (Logo designer)			MB-HLD Supported OS ^1: Windows 7/Vista/XP (SP2 or higher)/2000 (SP4 or higher) , Languages: Japanese, English, German and Chinese ^2
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
	Wavelength		10.6 µm 0.42 Mil
Guide laser	Working distance pointer		Semiconductor laser, Class 2 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10)^*3
Guide laser/working distance pointer	Wavelength		655 nm
Marking area			120 x 120 x 42 mm 4.72" x 4.72" x 1.65"
Basic working distance (±variation width)			189 mm (±21 mm) 7.44" (±0.83")
Marking resolution			―
Scan speed
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana, and kanji)/user font/true type font
	Barcode		CODE39/ITF/2 of 5/NW7 (CODABAR)/JAN/CODE128
	2D code		QR code/micro QR code/DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar Truncated/GS1 DataBar Truncated CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point/straight line/dashed line/circle/oval
Marking conditions	Marking style		―
	Character size (height × width)
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output/MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0 ^*4
CF memory card slot			Dedicated for use with CompactFlash cards
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
CF memory card slot			Dedicated for CF memory card ^*5
Supply voltage			100 to 120 VAC or 200 to 240 VAC, 50/60 Hz, 1,500 VA maximum
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			11.4 kg
^1 For Windows 7/Vista, the 32 bit and 64 bit versions are available. For Windows XP/2000, only the 32 bit version is available. Windows is the registered trademark of Microsoft. ^2 Simplified Chinese compatible. Traditional Chinese not supported. ^3 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 Port dedicated for PC software ^*5 CF card of SanDisk Corporation is recommended.

Keyence ML-Z9500A Keyence

€4.901,95

Only 1 unit left

Specifications

Model			ML-Z9500A
Type			Controller
Marking head unit			ML-Z9510A, ML-Z9510TA, ML-Z9520A, ML-Z9520TA, ML-Z9550A, ML-Z9550TA
Console (Color touch panel)			MC-P1
Marking style			XYZ 3-Axis simultaneous scanning method
Marking laser	Type		CO₂ Laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1)
	Wavelength		10.6 µm 0.42 Mil (ML-Z9510A/Z9520A/Z9550A) 9.3 µm 0.37 Mil (ML-Z9510TA/Z9520TA/Z9550TA)
	Output		30 W (ML-Z9510A/Z9520A/Z9550A) 20 W (ML-Z9510TA/Z9520TA/Z9550TA)^*2
Applicable regulations			EU Directives (EMC Directive, Machinery Directive, RoHS Directive), EN Standards (EN55011, EN ISO 11553-1, EN60204-1, EN60825-1, EN61000-6-2, EN50581), CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1-12, UL61010-1), North American Regulations (FCC Part 15B, ICES-001 Class A), China RoHS
Guide laser / working distance pointer			Semiconductor laser, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10^*1, GB7247.1), Wavelength: 655 nm, Output: 1.0 mW
Marking area			120 × 120 × 42 mm 4.72" × 4.72" × 1.65" (ML-Z9510A/Z9510TA) 300 × 300 × 42 mm 11.81" × 11.81" × 1.65" (ML-Z9520A/Z9520TA) 50 × 50 × 4 mm 1.97" × 1.97" × 0.16" (ML-Z9550A/Z9550TA)
Basic working distance (±variation width)			189 mm 7.44" (±21 mm ±0.83") (ML-Z9510A/Z9510TA) 300 mm 11.81" (±21 mm ±0.83") (ML-Z9520A/Z9520TA) 92 mm 3.62" (±2 mm ±0.08") (ML-Z9550A/Z9550TA)
Marking resolution			2 µm 0.08 Mil (ML-Z9510A/Z9510TA) 5 µm 0.20 Mil (ML-Z9520A/Z9520TA) 1 µm 0.04 Mil (ML-Z9550A/Z9550TA)
Scan speed			12000 mm 39.37'/s max. (ML-Z9510A/Z9510TA) 6000 mm 19.69'/s max. (ML-Z9520A/Z9520TA/Z9550A/Z9550TA)
Character type	Font		KEYENCE original font (numerical value, alphabet, katakana, hiragana and kanji) / user font / TrueType font
	Barcode		CODE39 / ITF / 2of5/NW-7 (Codabar) / JAN / EAN / UPC / CODE128
	2D code		QR code / micro QR code / DataMatrix (ECC200 / GS1 DataMatrix)
	GS1 DataBar		GS1 DataBar (Truncated)/GS1 DataBar (Truncated) CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/GS1 DataBar Limited CC-A
	Logo image		Custom font, logo (CAD) data BMP/JPEG/PNG/TIF
	Laser cutting		Fixed point / straight line / dashed line / circle / oval
Marking conditions	Marking style		Stationary marking / movement marking (constant speed / encoder)
	Character size (height × width)		0.2 to 120 mm 0.008" to 4.72" (ML-Z9510A/Z9510TA) 0.3 to 300 mm 0.012" to 11.81" (ML-Z9520A/Z9520TA) 0.1 to 50 mm 0.004" to 1.97" (ML-Z9550A/Z9550TA)
	Program	Registered programs	2000 settings max.
		Number of blocks	256 blocks
Input / Output			Terminal block input and output / MIL connector input and output
Interface			RS-232C/RS-422A/USB2.0^*3
CF memory card slot			Dedicated for CF memory card^*4
Marking unit installation direction			All directions
Marking unit cable length			5 m 16.40'
Cooling method			Forced air cooling
Supply voltage			100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz, 1500 VA max.
Environmental resistance	Ambient temperature for storage		-10 to +60 °C 14 to 140 °F (No freezing)
	Ambient temperature		0 to +40 °C 32 to 104 °F
	Relative humidity		30 to 85 % RH (No condensation)
Weight			11.4 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 Laser tube monolithic output ^3 The USB port is dedicated for PC software ^4 CF card of SanDisk Corporation recommended.

Page 1 / 9Next