Machine Vision Systems

€0,00

Sold Out

Specifications

Model				SV2-M020AK
General specifications	Applicable servo amplifier			SV2-020L2
	Rated output			200 W
	Rated torque			0.637 N·m ^*1
	Instant maximum torque			2.23 N·m
	Rated current			1.6 Arms
	Instant maximum current			5.8 Arms
	Rated rotation speed			3000min^-1
	High rotation speed			6000 min^-1
	Torque constant			0.444 N·m/Arms
	Rotor moment of inertia			0.263 ×10^-4kg·m²
	Rated power rating			15.4 kW/s
	Rated angle acceleration			24200 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (3 directions: up/down, left/right, forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			UL: phase A, CE: phase B
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			15 ×
	Approx. weight			0.8 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence OP-80107 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FU-95S Keyence

€563,95

Only 4 units left

Specifications

Model		FU-95S
Type		Liquid-level detection fiber unit
Detecting method		Pipe mounting type
No. of beam axes		16 mm0.63"
Fibre unit length		2 m78.74" free-cut
Fibre unit diameter		ø2.2×2
Minimum bend radius		R5 mm0.197"
Environmental resistance	Ambient temperature	-40 to +70 °C -40 to 158 °F
Accessories		Binding band × 2, nonslip rubber × 2, Fiber cutter × 1
Weight		Approx. 23 g

Keyence CA-DRW7 Keyence

€376,95

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51581 Keyence

€0,00

Sold Out

Specifications

Model				OP-51581
Type				5-pole terminal block
Note				Included with NR-500

Keyence DX-A400 Keyence

€0,00

Sold Out

Specifications

Model		DX-A400
Controller	CPU	ARM® Penta Core
	OS	Android™14
Main Memory	RAM/ROM	4 GB RAM, 64 GB ROM
Display	LCD	4.0-inch, 480 × 800
	Operation Status LED	3-color LED
Operations	Hard Keys	Trigger key × 2, Volume up/down keys, Power key, Front Fn key × 3
	Touch Panel	Electrostatic capacitance method (Tempered glass)
Scanner	Reading Light Source	High-intensity white LED
	Pointer Light Source	Visible semiconductor laser (655 nm), Output: 390 μW, Class 1 laser product (JIS C 6802) (IEC 60825-1)
	Minimum Resolution	2D code: 0.169 mm 0.0067", Barcode: 0.076 mm 0.0030"
	Field Range	186 × 114 mm 7.32" × 4.49" (Reading distance: 200 mm 7.87")
	Supported Codes	UPC/EAN/JAN (add-on code support), CODE128, GS1-128, CODE39, Codabar (NW-7), CODE93, ITF, COOP 2of5, Industrial 2of5, QR code, Micro QR, DataMatrix (ECC200), PDF417, GS1 DataBar, Composite Code, Postal
Communication	Wireless LAN	IEEE 802.11 a/b/g/n/ac 2.4 GHz (b,g,n: 1 to 11 ch) 5.2 GHz, 5.3 GHz (a/n/ac)
	Bluetooth	Bluetooth Ver. 5.1 BR/EDR/LE
	WWAN	4G LTE/3G, SIM unlocked, Nano SIM slot × 1
	GNSS	GPS, A-GPS, GLONASS, Beidou
	NFC	ISO 14443 Type A, B, FeliCa, ISO 15693
	Supported Media	microSD/SDHC/SDXC UHS-I
Power Source	Main Battery	Dedicated lithium-ion battery pack
	Backup Battery	Built-in lithium secondary battery: Approx. 1 month^*1
Other	Microphone	2 (noise-canceling)
	Speaker	Speaker × 1, Receiver × 1
	Vibration	Available
	Camera	Rear Camera: 8 MP-AF, Front Camera: 5 MP
	Sensor	Accelerometer, Gyroscope, Digital compass, Ambient light, Proximity, Temperature and humidity, Barometric pressure
Environmental resistance	Ambient temperature	-20 to +50°C -4 to +122°F, Charging: 0 to +40°C 32 to 104°F^*2
	Relative humidity	20 to 85% RH (No condensation)
	Storage temperature	-20 to +60°C -4 to +140°F (No freezing)
	Storage relative humidity	20 to 85% RH (No condensation)
Dimensions		143.5 × 73.7 × 31.8 mm 5.65" × 2.90" × 1.25"
Weight		Approx. 165 g 5.82 oz
^1 This indicates the case when the main battery is not attached or the battery has no charge. ^2 Due to the added load in sub-zero environments, the continuous usage time may be reduced significantly. Be sure to test the device before use in these environments.

Keyence VT3-Q5H Keyence

€4.267,95

Only 8 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SJ-B020 Keyence

€1.701,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence XG-8500 Keyence

€636,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-89069 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence RK-10AY Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-NC4AD Keyence

€523,95

Only 5 units left

Specifications

Model			KV-NC4AD
Conversion speed			80 μs/channel^*1
Conversion			A/D conversion
Points			4 (single end)
Range/resolution	Voltage	-10 V to +10 V	1/8000 2.5 mV
		0 to 10 V	1/4000 2.5 mV
		0 to 5 V	1/4000 1.25 mV
		1 to 5 V	1/3200 1.25 mV
	Current	0 to 20 mA	1/4000 5 μA
		4 to 20 mA	1/3200 5 μA
Conversion precision	Voltage	Without temperature compensation	±0.3% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.5% of F.S. (at 0 to 55°C 32 to 131°F)
		With temperature compensation	±0.3% of F.S. (at 0 to 55°C 32 to 131°F)
	Current	Without temperature compensation	±0.4% of F.S. (at 25°C ±5°C 77°F ±9°F) ±0.6% of F.S. (at 0 to 55°C 32 to 131°F)
		With temperature compensation	±0.4% of F.S. (at 0 to 55°C 32 to 131°F)
Input resistance	Voltage		5 MΩ
	Current		250 Ω
Absolute maximum input	Voltage		±15 V
	Current		±30 mA
Isolation method	Between analog input		Isolated (photocoupler, transformer)
	Between analogu input channels		No isolation
Minimum load resistance	Voltage		−
Maximum load resistance	Current
Special functions			Input range switching, temperature fluctuation compensation enabling/disabling, channel skip, scaling, special data offset, peak-/bottom-hold, zero clip, zero shift, comparator, averaging (time-specified, count-specified, moving average), disconnection detection,
^*1 When the temperature fluctuation compensation is used, the temperature fluctuation compensation time of 80 μs will be added regardless of the number of channels being used.

Keyence OP-88752 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-66844 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R111F Keyence

€2.241,95

Only 5 units left

Specifications

Model			GL-R111F
Detection capability			ø0.55" ø14 mm
Total length			44.09" 1120mm
No. of beam			111
Detection height			43.31" 1100mm
Protection height			44.25" 1124mm
Beam axis spacing/Lens diameter			10 mm 0.39" / ø4 ø0.16"
Detecting distance			0.66 to 32.81' 0.2 to 10 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	16.4
		OFF→ON	63.4^*2
		All blocked→ON	102.4^*3
	Optical synchronization system (Channel A or B)	ON→OFF	24.6
		OFF→ON	75.7^*2
		All blocked→ON	135.2^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	74
		Receiver	85
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1600 g
	Receiver
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence OP-88762 Keyence

€0,00

Sold Out

Specifications

Model				OP-88762
Type				FD-R connection cable (with MP-FEN1 connected)
Specifications				M12 male 5-pin - M12 female 4-pin
Length				2 m 6.6'
Weight				Approx. 85 g 2.99 oz

Keyence ER-U30PC Keyence

€0,00

Sold Out

Specifications

Model		ER-U30PC ^*1
Type		Ultra-long distance unshielded type Screw type M30 Connector (M12 4-pin) PNP output
Power supply cable length		― ^*2
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		Available
Button	Function	Distance switching
Detecting distance	With default settings (Mode 1)	52 mm 2.05" ±10% ^*3
	With distance switching (Mode 2)	32 mm 1.26" ±10% ^*3
Response frequency	With default settings (Mode 1)	10 Hz ^4 ^5
	With distance switching (Mode 2)	20 Hz ^4 ^5
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*6
Standard detectable object (Iron, t = 1 mm 0.04")		156 × 156 mm 6.14" × 6.14"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.1 V or less (Output current: 10 mA or less) / 2.4 V or less (Output current: 10 to 100 mA) ^*7
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	PNP output: 1140 mW or less (48 mA or less at 24 V, 72 mA or less at 16 V) ^*8
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*9
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 150 g 5.30 oz
^1 Supports IO-Link specification v1.1/COM2 (38.4 kbps). ^2 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^3 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^4 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^5 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^6 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^7 Residual voltage is for when a 2 m 6.6' cable is used. ^8 For IO-Link-compatible devices listed under 1, power consumption is as follows. M8 type: 840 mW or less (35 mA or less at 24 V, 53 mA or less at 16 V) M12 type: 1090 mW or less (46 mA or less at 24 V, 69 mA or less at 16 V) M18, M30 type: 1250 mW or less (53 mA or less at 24 V, 79 mA or less at 16 V) ^9 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence GS-51P10 Keyence

€831,95

Only 5 units left

Specifications

Model			GS-51P10
Lock type			Power-to-release type
Type			Standard type
Response time	Lock	Lock→Unlock	220 ms^1^2
		Unlock→Lock	220 ms^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2 mm ±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm 9.84"
	Auxiliary release		Front, back ^*5
Cascading			Max. 25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	Max. load current		Max. 150 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
	OFF state voltage		Max 2.0 V (with a cable length of 5 m 16.40')
	Leakage current		Max. 0.5 mA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	Max. load current		50 mA
	Residual voltage (during ON)		Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input		Approx.1.5 mA × 2
	Reset/EDM input		-
	Lock control input		Approx. 2.5 mA × 1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage		24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
	Power consumption		3.4 W^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C° -4°F to 131°F (No freezing)
	Operating relative humidity		5% to 95%RH
	Storage temperature		-25°C to +70°C -13°F to 158°F (No freezing)^*7
	Storage relative humidity		5% to 95%RH
	Vibration resistance		10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		Cable	PVC
	Actuator	Case	PPS, PBT, NBR
		Lock	Aluminum alloy, SUS303
Weight			Approx. 770 g
^1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). ^2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3 430 ms when locked at the same time the actuator is detected. ^4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". ^5 Do not apply excessive torque (0.45N·m or higher). ^6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.

Keyence GA-245 Keyence

€1.154,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87394 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CAMERA Keyence

€266,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence GL-R103F Keyence

€1.861,95

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence PX-10C Keyence

€449,95

Only 6 units left

Specifications

Model		PX-10C
Type		Connector type
Output		NPN
Response time		500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Output selection		LIGHT-ON/DARK-ON
Indicator lamp		- Operation indicator：Red LED x 2, DSC orange LED x 1 - Dual digital monitor：Dual 7-segment display [Preset value (4-digit green LED) and current value (4-digit red LED) illuminated together, current value range：0 to 65504, excess gain：0 P to 999 P] - Hold function：Possible to display both peak and bottom hold values. Selectable from 5 variations. - Bar LED monitor [Excess gain displayed (85% to 115% in 7 steps)] - Scaling display
Detection mode		Light intensity (automatic sensitivity-tracking function provided)/ [Limit light intensity/output monitor]
Shift function		Variable between –1999 and 9999
Timer function		Timer OFF/OFF-delay/ON-delay/One-shot/ON-delay, OFF-delay/ON-delay, One-shot Timer duration selectable：1 ms to 9999 ms Maximum error against the setting value：10% max.
Control output		NPN open-collector 40 V, 100 mA max. for an output/100 mA max. for two outputs, residual voltage 1 V max.
External input		―
Interference prevention		Up to 4 units (in all power modes)^*1
Rating	Power voltage	12 to 24 VDC, Ripple (P-P) 10 % or less, Class2^*2
	Power consumption	Standard mode：50 mA max. at 24 V/55 mA max. at 12 V Power saving mode：40 mA max. at 24 V/45 mA max. at 12 V
Environmental resistance	Enclosure rating	IEC: IP67/JEM: IP67/NEMA: 4X
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing：PBT, display：PSU, display cover/connector cover：SUS304, radiator plate：SUS304, gasket：NBR
Weight		Approx. 50 g
^1 The received light intensity may vary somewhat when the sensor head's cable layout is changed, so redo the sensitivity setting when changing the layout. The interference prevention function is affected somewhat when using multiple units installed adjacent to each other. Fine-tune the sensitivity (increase the setting) for adjacent layouts. ^2 Use a 24 VDC power voltage when using a head light transmitting cable of 3 m 9.8' or more (PX-H71/H71TZ) or 10 m 32.8' or more (PX-H72). ^*3 When using multiple units connected adjacently, the ambient temperature varies with the conditions below. 2 to 4 Units: -10 to +50 °C 14 to 122 °F, 5 to 17 Units: -10 to +45 °C 14 to 133 °F.

Keyence OP-87405 Keyence

€5.020,95

Only 1 unit left

Specifications

Model				OP-87405
Type				Adjustable bracket for threaded mount type
Applicable product				LR-Z series,PR-G series
Number included				1
Material				Zinc nickel, plating
Weight				100 g