Machine Vision Systems

Keyence CV-5700 Keyence

€1.892,95

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-SDB2T Keyence

€457,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DSR3 Keyence

€539,95

Only 6 units left

Specifications

Model				CA-DSR3
Type				Back Light
LED color				Red
Power consumption				3.6 W
Input voltage				12 VDC
Weight				Approx. 40 g

Keyence ER-18N03C Keyence

€0,00

Sold Out

Specifications

Model		ER-18N03C
Type		Ultra-long distance shielded type Screw type M18 Connector with pigtail (M12 4-pin) NPN output
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		Available
Button	Function	Distance switching, Through-Metal
Detecting distance	With default settings (Mode 1)	15 mm 0.59" ±10% ^*2
	With distance switching (Mode 2)	10 mm 0.39" ±10% ^*2
Response frequency	With default settings (Mode 1)	20 Hz ^3 ^4
	With distance switching (Mode 2)	50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		45 × 45 mm 1.77" × 1.77"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less 100 mA or less for 1 output, or 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: LCP, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Button: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 85 g 3.00 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detection target is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence AS-440-10U (AS-440-10) Keyence

€0,00

Sold Out

Specifications

Model			AS-440-10U
Type			General-use amplifier unit
Sensor head			AH-422
Shape			Cylindrical and threaded, diameter: 22
Measuring range			0 to 10 mm0" to 0.394"
Analog output voltage	Output voltage		0 to 10 V
	Impedance		100 Ω
	Resolution		0.1% of F.S.
	Linearity		±1% of F.S.
	Response		3.3 kHz (-3 dB)
Temperature fluctuation	Sensor head		0.03% of F.S./°C^*1
Temperature characteristics	Amplifier unit		0.05% of F.S./°C^*1
Rating	Power voltage		110/120/220/240 VAC ±10 %, 50/60 Hz
	Power consumption		5VA
Environmentalresistance	Enclosure rating	Sensor head	IP67
	Operating ambient temperature		-10 to +60°C 14 to 140°F, No freezing
		Amplifier unit	0 to +50°C 32 to 122°F
Environmental resistance	Relative humidity		35 to 85 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight	Sensor head		Approx 200g
Weight (including cord)	Amplifier unit		Approx 320g
^*1 When the distance between the sensor head and the target is within 50% of the measurement range.

Keyence PR-B02 Keyence

€0,00

Sold Out

Specifications

Model				PR-B02
Type				Flat bracket, rear type
Applicable product				PR-F Series
Number included				1 pcs.
Material				SUS316L
Note				M3 screw × 2 included
Weight				Approx. 10 g

Keyence OP-51583 Keyence

€0,00

Sold Out

Specifications

Model				OP-51583
Type				26-pin terminal block cable
Length				45 cm

Keyence FD-M100AT Keyence

€1.840,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-236 (OP-0236) Keyence

€0,00

Sold Out

Specifications

Model				OP-236
Type				Free-cut Connector
Applicable product				Cable outer diameter ø2.2 (Free-cut), FU-8□C Series, FU-□□X Series
Note				When using FS2-60/62/65, this adapter and fixing ring are necessary to mount fiber unit. Attached to the amplifier. Please purchase when additionally necessary.

Keyence RK-10DMC Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CL-L015 Keyence

€4.629,95

Only 3 units left

Specifications

Model				CL-L015 ^*1
Type				Sensor head (15 mm ・Quad type)
^*1 The sensor head and optical unit have been configured as a pair. Specifications can be found on the page relating to the optical unit.

Keyence LS-7500 Keyence

€4.969,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT3-V10 Keyence

€831,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-CN17R Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CV-5502P Keyence

€9.048,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-2425 Keyence

€0,00

Sold Out

Specifications

Model				OP-2425
Type				M4 nut setup
Applicable product				FU-63, FU-66, FU-68, FU-73, FU-78, FU-7F, FU-8*C, FU-81C, FU-86, FU-88
Number included				Nut x 2, Washer x 1, Toothed washer x 1
Note				2 sets are necessary for thrubeam units.

Keyence OP-66858 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-P10PS Keyence

€341,95

Only 3 units left

Specifications

Model				SZ-P10PS
Type				Output Cable, PNP
Applicable product				SZ-01S
Length				10 m 32.81'
Weight				Approx. 530 g

Keyence OP-88881 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence VT3-W4T Keyence

€1.064,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence FR-SA2 Keyence

€0,00

Sold Out

Specifications

Model		FR-SA2
Type		Short Separated Amplifier Unit Cable Expansion Unit
Response time		0.4 s, 1.5 s, 4 s (default value), 10 s
Output	No. of control outputs	Maximum 5
	Control output/auxiliary output	NPN/PNP open collector (switchable) up to 30 VDC or less, max 50 mA for each Total 750 mA or less for the entire amplifier when adding five or more expansion units Residual voltage 1.4 V or less (50 mA or less) N.O./N.C. switchable IO5 is switchable to external input
	Analog output	─
External input		Short circuit current: 1.5 mA or less Input time: 500 ms or more
External communication		NU Series compatibility
Analog output accuracy	Resolution	─
	Zero accuracy
	Full-scale accuracy
Expansion		Connected to FR-SA1 (with FR-S01 connected): up to 8 units (9 units total including main unit)^1 Connected to FR-SA1 (with FR-SH01(C) connected): up to 12 units (13 units total including main unit)^1 FR-SA2 is connected to NU series: up to 16 units^*2
Power supply	Power voltage	24 VDC +25%/−20%^3^4 including ripple, Class2 or LPS
	Power consumption	When FR-S01 is connected: up to 1690 mW or less (60 mA or less at 24 V) When FR-SH01(C) is connected: up to 1310 mW or less (48 mA or less at 24 V) (Excluding Load Current)
Environmental resistance	Ambient temperature	–20°C to +55°C -4°F to +131°F (no freezing)^*5
	Relative humidity	Up to 85% RH (no condensation)
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent protection, and output surges
Material		PC
Weight		Approx. 90 g 3.17 oz
^1 You can increase the number of expansion units possible in the system by lowering the total analog output current below 750 mA. For details, contact your nearest KEYENCE office. ^2 When expanding the system by six or more units with the FR-S01 connected or by eight or more units with the FR-SH01 connected, contact your nearest KEYENCE office. ^3 When expanding the system by one or more FR-SA2 units with the FR-S01 connected or by eight or more FR-SA2 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^4 When expanding the system by four or more FR-SA0 units with the FR-S01 connected or by ten or more FR-SA0 units with the FR-SH01 connected, use a power voltage of 21.6 V or higher. ^*5 When expanding the system by 1 expansion unit, ensure the ambient temperature is 50°C 122°F or less. When expanding the system by 2 or more expansion units, ensure the ambient temperature is 45°C 113°F or less.

Keyence ER-GR12N Keyence

€0,00

Sold Out

Specifications

Model		ER-GR12N
Type		Environment-resistant all-metal shielded type Screw type M12 Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		7 mm 0.28" ±10% ^*2
Response frequency		100 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		21 × 21 mm 0.83" × 0.83"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±20% or less of detecting distance at +25°C +77°F (-40 to -25°C -40°F to -13°F, +55 to +85°C 131°F to 185°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1000 mW or less (42 mA or less at 24 V, 63 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP68G (JIS C 0920), IP69K (DIN40050)
	Ambient temperature	-40 to +85°C -40°F to +185°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G2 /Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface and case: SUS316L, Nut: SUS316L, Toothed lock washer: SUS316L [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP) [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 75 g 2.65 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +70°C +158°F or higher is 33% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-CH5L Keyence

€330,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence KV-XLE02 Keyence

€454,95

In stock, 11 units

Specifications

Model		KV-XLE02
Type		Ethernet unit
Connection interface		RJ-45 8-pole modular connector × 2 ports
Transmission specifications	Transmission rate	10BASE-T: 10 Mbps, 100BASE-TX: 100 Mbps, 1000BASE-T: 1000 Mbps ^*1
	Transmission media	10BASE-T: Category 3 or higher UTP or STP (STP is recommended) 100BASE-TX: Category 5 or higher UTP or STP (STP is recommended) 1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recommended) ^*2
Max. cable length		10BASE-T: 100 m 328.1' 100BASE-TX: 100 m 328.1' 1000BASE-T: 100 m 328.1' ^*3
Max. number of connectable hubs		10BASE-T: 4 100BASE-TX: 2 1000BASE-T: 1 ^*4
Connectable CPU unit		KV-X Series/KV-8000A
Refresh		Automatic refresh, direct refresh, inter-unit synchronization refresh
Ethernet functions		KV socket communication, PLC link, PROTOCOL STUDIO, FTP server/client, KV sensor network, Modbus server^5, MC protocol/SLMP^6, etc.
Industrial networks		EtherNet/IP™, PROFINET, EtherCAT®,^7 CC-Link IE Field^8^*9
Ethernet function execution methods		Ladder program, unit program (flow)
Unit program capacity		3 MB (Max. number of blocks: Approx. 20000)
flow	Max. number of flows	256
	Number of simultaneous activities	Unlimited
Flow	Internal data Memory	524288 words
PROTOCOL STUDIO	Transmission method	Cyclic communication: Tx + Rx, Tx only, Rx only. Event communication: Tx + Rx, Tx only, Rx only, Tx + Continuous Rx
	Max. number of connected devices	16
	Max. number of communication commands	160/320^*10
	Maximum number of total frames	Rx: 160/320^10 × 16 Tx: 160/320^10 × 1
	Max. number of compared received frames	16 per command
	Maximum number of block elements	96 per frame
	Transmission data length	Standard: 1 to 2048 bytes per frame, Extended: 1 to 16384 bytes per frame
	Reception data length
PLC link	Communication patterns	Write, read, transfer
	Number of link settings	512 settings max.^*11
	Link data size	1440 words max. per setting (bit: 720 words, word: 720 words), 737280 words max. (total) (1440 words × 512 settings)
	Data unit	1 word
	Number of connected models	16 models max.^*11
	Number of connected units	64 max.^*11
	Trigger types	Cyclic/event (64 settings max. for event^*11)
	Update interval	1 to 65535 ms
Internal current consumption		200 mA or less
Weight		Approx. 190 g 6.71 oz
^1 10 Mbps/100 Mbps/1000 Mbps MDI/MDI-X automatic switching function supported ^2 STP = Shielded twisted pair cable; UTP = Unshielded twisted pair cable ^3 The maximum cable length refers to the distance between the KV-XLE02 and the Ethernet switch. ^4 The maximum number of connection is not limited when an Ethernet switch is used. ^5 Modbus is a registered trademark or trademark of Schneider Electric. ^6 SLMP is a registered trademark or trademark of Mitsubishi Electric Corporation. ^7 EtherCAT^® is fixed at 100 Mbps. It is not usable at different transmission rates. ^8 CC-Link IE Field is fixed at 1000 Mbps. It is not usable at different transmission rates. ^9 Industrial network trademarks • EtherNet/IP™ is a registered trademark or trademark of ODVA. • PROFINET is a registered trademark or trademark of PROFIBUS Nutzerorganisation e.V. • EtherCAT^® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany • CC-Link IE Field is a registered trademark or trademark of Mitsubishi Electric Corporation. ^10 The max. is 160 when “Standard” is set for the number of communication commands in Unit Editor and 320 when “Extended” is set. ^*11 Total for one KV-XLE02 unit.