Machine Vision Systems

€0,00

Sold Out

Specifications

Model				SV2-M150AK
General specifications	Applicable servo amplifier			SV2-150L2
	Rated output			1.3 kW
	Rated torque			8.34 N·m ^*1
	Instant maximum torque			23.3 N·m
	Rated current			10.7 Arms
	Instant maximum current			28 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.891 N·m/Arms
	Rotor moment of inertia			19.9 ×10^-4kg·m²
	Rated power rating			35.0 kW/s
	Rated angle acceleration			4190 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			7.1 kg
^*1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink.

Keyence FI-CF2 Keyence

€0,00

Sold Out

Specifications

Model		FI-CF2
Type		Pipe type
Main unit		FI-C40F
Detection principle		Refractive index (surface light source)
Rated concentration range		Brix: 0–40% (nD: 1.32500–1.41000)
Display method		Status indicator light
Display range		Brix: 0–50%
Supported fluids		Non-corrosive aqueous solutions (such as water-soluble coolants, mold release agents, etc.)^*1
Supported fluid temperature		0–70°C 32–158°F (no freezing)
Connection diameter		Rc1 1/2（40A）
Rated pressure range		1.0 MPa or less
Pressure resistance		2.0 MPa
Display resolution		Brix: 0.01/0.1% (default value: 0.1) (nD: 0.00001)
Response time		1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
Measurement accuracy		Brix: ±0.2%^2^3 (nD: ±0.0003)
Concentration unit		Brix nD^*4
Temperature measurement accuracy		±1.0°C 1.8°F^*2
Power supply	Current consumption	25 mA or less
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient temperature	–10 to +60°C 14 to +140°F (no freezing)
	Relative humidity	35–85% RH (no condensation)
	Vibration resistance	10–500 Hz; Power spectral density: 0.816 G²/Hz; X, Y and Z directions
	Shock resistance	100 m/s² (approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions
Material	Liquid end materials	Body: SCS16A; Gasket: FKM
	Other materials	Body: SUS304; PPS indicator light: PPSU / TPU / PBT Cable: PVC
Weight		Approx. 1360 g 47.97 oz
^1 Use water as the solvent, and use materials that are soluble in water. If the particles are not water soluble, such as with slurry, the refractive index may not change. ^2 This is the guaranteed value from verification performed at KEYENCE inspection facilities. Measurement error may occur depending on the type, condition and temperature of the fluid used by the customer, as well as other factors. ^3 This is the value obtained when sucrose solution is used in a constant 20°C 68°F environment, and absolute error and repeatability is taken into account. ^4 When using solutions other than sucrose solutions, concentration can be adjusted via span adjustment.

Keyence OP-88888 Keyence

€0,00

Sold Out

Specifications

Model				OP-88888
Type				This is a standard 2S ferrule mounting bracket.
Material				Ferrule mounting bracket: SUS316L Gasket: EPDM

Keyence EV-30M Keyence

€0,00

Sold Out

Specifications

Model		EV-30M^*1
Type		AC , Shielded
Shape		M30
Detecting distance		10 mm 0.39" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		30 x 30 mm 1.18" x 1.18"
Hysteresis		10% max. of detecting distance
Response frequency		25 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance at 23°C 73.4°F, within -25 to +70°C -13 to +158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Short-circuit
Cable length		2 m 6.6'
Rating	Power voltage	24 to 240 VAC, 50/60 Hz
	Current consumption (leakage current)	1.3 mA max. (at 240 VAC)
	Residual voltage	―
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 3 times in each of the X, Y, and Z directions
Case material		Nickel-plated brass
Accessories		Nut × 2, toothed washer × 1, instruction manual
Weight		Approx. 300 g
^*1 This product does not comply with the EMC directive.

Keyence IV-D10 Keyence

€360,95

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DDR8 Keyence

€3.531,95

Only 1 unit left

Specifications

Model				CA-DDR8
Type				Dome Light
LED color				Red
Power consumption				5.8 W
Input voltage				12 VDC
Weight				Approx. 70 g

Keyence SV2-B150AK Keyence

€3.210,95

Only 4 units left

Specifications

Model				SV2-B150AK
General specifications	Applicable servo amplifier			SV2-150L2
	Rated output			1.3 kW
	Rated torque			8.34 N·m ^*1
	Instant maximum torque			23.3 N·m
	Rated current			10.7 Arms
	Instant maximum current			28 Arms
	Rated rotation speed			1500 min^-1
	High rotation speed			3000 min^-1
	Torque constant			0.891 N·m/Arms
	Rotor moment of inertia			22.0 ×10^-4kg·m²
	Rated power rating			31.6 kW/s
	Rated angle acceleration			3790 rad/s²
	Excitation method			Permanent magnet
	Position/speed detection encoder	Resolution		22 bits
		Type		Absolute (ABS) type
	Operating environment	Enclosure rating		Completely closed, self-cooling, IP67 standard (excluding connector and axis through-hole area)
		Operating ambient temperature		0 to +60°C 32 to 140°F (reduced ratings at +40°C 104°F or more)
		Storage ambient temperature		-20 to +60°C -4 to +140°F
		Operating/storage ambient temperature		20 to 80% RH (no condensation)
		Operating atmosphere		Indoors (no corrosive gas, flammable gas, oil mist, or dust)
		Altitude		2000 m 6561.7' or less (reduced ratings at 1000 m 3280.8' or more)
		Vibration rank		V15
		Vibration resistance		49 m/s² 160.8'/s² with servo motor flange surface as reference (up/down, left/right) 24.5 m/s² 80.4'/s² (forward/backward)
		Impact resistance		490 m/s² 1607.6'/s² with servo motor flange surface as reference, 2 times
	Isolation rank			phase F
	Min. insulation resistance			500 VDC, 10 MΩ or more with insulation resistance tester
	Isolation voltage tolerance			1500 VAC for 1 minute
	Approved standards	UL/CSA standards		UL1004-1, UL1004-6, CSA C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part15 B, ICES-003. Class A
	Allowable load inertia moment			5 ×
	Approx. weight			9 kg
Electromagnetic brake specifications	Capacity			10 W
	Rated voltage			24 VDC +10%/-0%
	Rated current (@20°C 68°F)			0.41 A
	Holding torque			19.6 N·m
	Release time			100 ms ^*2
	Operating time			80 ms ^*2
^1 50 W to 750 W rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 200 × 200 × 6 mm 7.87" × 7.87" × 0.24" (50 W / 100 W) or 250 × 250 × 6 mm 9.84" × 9.84" × 0.24" (200 W to 750 W) mountable aluminum heat sink. 1 kW to 5 kW rated torque is continuously allowable with ambient temperatures of 40°C 104°F and 400 × 400 × 20 mm 15.75" × 15.75" × 0.79" (1 kW to 2 kW) or 550 × 550 × 30 mm 21.65" × 21.65" × 1.18" (3 kW to 5 kW) mountable aluminum heat sink. ^2 The release time and operation time of the electromagnetic brake vary depending on the discharge circuit.

Keyence VJ-H500MX Keyence

€0,00

Sold Out

Specifications

Model		VJ-H500MX
Image sensor		Monochrome CMOS, square lattice
Unit cell size		3.45 µm × 3.45 µm
Image size		Equivalent to 2/3"
Valid pixel count		5 megapixel mode: 2432 (H) × 2040 (V) 2 megapixel mode: 1600 (H) × 1200 (V)
Transfer time		5 megapixel mode: 27.7 ms 2 megapixel mode: 11.7 ms
Pixel transfer frequency		195 MHz
Transfer system		Digital serial transfer
Electronic shutter		Settable from 0.017 msec to 100 msec
Lens mount		C-mount
Environmental resistance	Ambient temperature	0 to 40°C 32 to 104°F
	Relative humidity	85% RH or less
Weight		Approx. 280 g (not including lens)

Keyence OP-85505 Keyence

€0,00

Sold Out

Specifications

Model				OP-85505
Overview				This is a connector cable for the M12 connector sensor. This connector cable is made of polyurethane (PUR), which has excellent oil resistance.
Applicable product				PZ-G threaded models (For M12 connector)
Number included				1 pcs.
Cable end				M12 straight - Loose wire
Length				2 m 6.56'
Material				Cable: Polyurethane (PUR)
Weight				Approx. 75 g

Keyence ER-GL08PC Keyence

€0,00

Sold Out

Specifications

Model		ER-GL08PC
Type		General-purpose all-metal shielded type Screw type M8 Connector (M8 3-pin) PNP output Long-Range
Power supply cable length		― ^*1
No. of control outputs		1
Output mode	Output 1	N.O.
	Output 2	―
Button		None
Button	Function	―
Detecting distance		3 mm 0.12" ±10% ^*2
Response frequency		80 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		9 × 9 mm 0.35" × 0.35"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 50 mA or less for 1 output; 50 mA or less in total for 2 outputs
Control output	Residual voltage	PNP output: 2.2 V or less (Output current: 10 mA or less) / 2.3 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	750 mW or less (32 mA or less at 24 V, 47 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 20 g 0.71 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence NR-CT100 Keyence

€0,00

Sold Out

Specifications

Model		NR-CT100
Primary side rated current (In)		100 A
Overcurrent withstand capability		1.2 times the primary side rated current (can be continuous)
Maximum wire diameter that can be installed		ø16 0.63"
Installation method		Clamp type (split core)
Ratio error to current load		±0.5% of rdg (20% ≤ In ≤ 100%)
Phase difference for current load		± 90’ (20% In) ± 90’ (100% In)
Protection element		Internal clamping element
Environmental resistance	Insulation resistance	500 V DC/100 M Ω or more
	Ambient temperature	-10°C to +55°C 14°F to 131°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Withstand voltage	2300 V AC/minute
Weight		Approx. 170 g 6.00 oz (with cable)

Keyence IV3-G500CA Keyence

€1.299,95

In stock, 11 units

Specifications

Model		IV3-G500CA
Type		Standard
Installed distance		50 mm 1.97" or more ^*1
Field of view		Installed distance 50 mm 1.97": 22 (H) × 16 (V) mm 0.87" (H) × 0.63" (V) Installed distance 3000 mm 118.11": 1184 (H) × 888 (V) mm 46.61" (H) × 34.96" (V) (typical example)
Image receiving element	Type	1/2.9 inch color CMOS
	Number of pixels	1280 (H) × 960 (V)
Focus adjustment		Auto ^*2
Exposure time		12 μs to 9 ms
Lights	Illumination	White LED
	Lighting method	Pulse /continuous lighting is switchable.
Indicators		2 (the same display details for both indicators)
Environmental resistance	Enclosure rating	IP67 ^*3
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing) ^*4
	Relative humidity	35 to 85% RH (No condensation)
	Vibration resistance	10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions ^*5
	Shock resistance	500 m/s² 1640'/s², 3 times in each of the 6 directions ^*5
Material		Main unit case: Zinc die-casting, Front cover: Acrylic, Operation indicator cover: TPU
Weight		Approx. 75 g 2.65 oz (without the AI Lighting unit) Approx. 225 g 7.94 oz (with the AI Lighting unit)
^1 Removing the polarizing filter is recommended when used at distances of 3 m 9.8' or more. ^2 The focus position can be automatically adjusted at the time of installation. This function is deactivated during operation. A different focus position can be registered for each program. ^3 Except when the polarizing filter (OP-88642/OP-88643/OP-88646/OP-88647) is mounted. ^4 For situations where the operating ambient temperature will exceed 40°C 104°F, follow KEYENCE’s specified heat dissipation measures to ensure the case temperature does not exceed the rated maximum temperature (65°C 149°F). Check the instruction manual for more information. ^*5 Except when the dome attachment (IV2-GD05/IV2-GD10) is mounted.

Keyence KV-N10L Keyence

€361,95

Only 2 units left

Specifications

Model			KV-N10L
Transmission specifications	Electrical termination (Terminator)		―
	Baud rate		1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
	Transmission method		Full duplex
	Data format	Start bit	1 bit
		Data bits	7 bits, 8 bits
		Stop bits	1 bit, 2 bits
	Error detection	Parity	Even, odd, none
	RS/CS flow control		Enabled, disabled
Interface	Communication standard		RS-232C
	Connection		D-sub 9-pin
Transmission specifications	Transmission distance		15 m 49.2'
	Number of transmission units		1
Indication			SD (orange), RD (orange)
Weight			Approx. 30 g

Keyence MD-U2510 Keyence

€0,00

Sold Out

Specifications

Model		MD-U2510
Type		7 W type Standard area type Head
Marking laser	Output	8.5 W/40 kHz (output at contact point: 7 W)
	Q-switch frequency	CW (continuous oscillation), 40 to 400 kHz
Laser class	Marking laser	YVO₄ laser wavelength: 355 nm class 4 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Distance measurement laser	Semiconductor laser wavelength: 683 nm output: 5.0 mW class 3R laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
	Guide laser	Semiconductor laser wavelength: 655 nm output: 1.0 mW class 2 laser product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10)^*1
Marking area		125 × 125 × 42 mm 4.92"×4.92"×1.65"
Standard working distance (±variation width)		189 mm 7.44" (± 21 mm ± 0.83")
Marking method		XYZ 3-axis simultaneous scanning method
Marking method	XY scanner	Digital galvo scanner
	Z scanner	Linear motor
Optional models	3D marking	MD-AD-3D
	Built-in camera alignment	MD-AD-XYT
	Autofocus	MD-AD-ZT
	Built-in 2D code reader	MD-AD-2DR/MD-AD-2DRA (corresponding standard ISO/IEC TR 29158 (AIM DPM-1-2006))
	Handheld console	MC-P1
	Laser safety module	MD-C2BU
	PC software	MB-PH1 (Marking Builder Plus/Marking Diagnostic Tool)^*2
Built-In Camera	Image sensor	CMOS image sensor (2.3 megapixels)
	No. equipped	2 (full-view camera/coaxial camera)
	Built-in light source	High-intensity green LED
Built-in power meter		Thermopile
Logging function		Internal operation/terminal block/communication/error/operating information/built-in camera image
Character type	Font	Original Font/User Font/TrueType Font/OpenType Font^*3
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93/GS1 DataBar
	2D code	QR Code/Micro QR Code/DataMatrix (ECC200/GS1 DataMatrix/DMRE)
	Logo image	DXF/BMP/JPEG/PNG/TIFF
	Appearance	Plane, 3D shapes (slope, cylinder, cone, sphere, 3DCAD (STL))^*4
	Work state	Stationary/moving (constant velocity, encoder/rotary marking)
Input / Output		Terminal block input and output/MIL connector input and output/Laser safety module control input and output^*5
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX)^*6
Marking unit cable length		4.6 ± 0.1 m 15.1' ± 0.3'
Enclosure rating		IP64 (head part)
Environmental resistance	Ambient temperature for transport/storage	-10 to 60°C 14 to 140°F (no freezing)
	Ambient temperature	0 to 40°C 32 to 104°F
	Ambient temperature for transport/storage	Max. 85% RH (no condensation)
	Relative humidity
Weight		Controller: 9.7 kg 21.38 lb Head: 22.9 kg 50.49 lb Control cable: 2.5 kg 5.51 lb Console: 2.0 kg 4.41 lb
Compatible regulations		EU Directives (EMC Directive, Low Voltage Directive, RoHS Directive) / EN Standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN63000) / CSA Standards and UL Standards (CAN/CSA C22.2 No. 61010-1, UL61010-1) / North American Standards (FCC Part 15B, ICES-001 Class A) / China RoHS/UKCA
^1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice ^2 Download from the KEYENCE website. Software supported languages: English, Japanese, Chinese (Simplified), Chinese (Traditional), German, Korean, French, Spanish, Thai, Italian ^3 Only TrueType fonts and OpenType fonts with “Installable” or “Editable” font attributes are supported. This attribute can be found in properties at Control Panel - Font. ^4 When using MD-AD-3D ^5 When a laser safety module (MD-C2BU) is installed ^6 The USB ports are USB memory, USB mouse port, barcode reader (A connector) and a dedicated Marking Builder Plus (ActiveX) port (B connector). Supported Ethernet ports include Marking Builder Plus (ActiveX), Operation Monitor, Communication with diagnostic tools and TCP/IP communication, PROFINET, EtherNet/IP^TM, EtherCAT®, and FTP client.

Keyence SV3-300L2 Keyence

€0,00

Sold Out

Specifications

Model				SV3-300L2
General specifications	Capacity			3.0 kW
	Input power supply	Voltage/frequency	Main circuit	3-phase (or single-phase^1) 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^2
			Control circuit	Single-phase 200 to 240 VAC (-15%/+10%), 50/60 Hz, 270 to 324 VDC^*2
		Allowable frequency fluctuation	Main circuit/control circuit	±5% max.
		Overvoltage category		III
	Control mode			Three-phase full-wave rectification, IGBT, PWM control, Sine wave current drive system
	Feedback			Serial encoder (absolute) communication, Fully closed control serial communication, Analog feedback
	Operating environment	Operating atmosphere	Enclosure rating	IP20:SV3-005L2/010L2/020L2/040L2/075L2/100L2/150L2 IP10:SV3-200L2/300L2/500L2
			Pollution degree	2 (in an IP54 or higher control panel) However, the product must be used in the following environments: • No corrosive or flammable gases • No exposure to water, oil, or chemicals • No dust
		Operating ambient temperature		-5 to +60°C 23 to 140°F (No freezing) (reduced ratings at +55°C 131°F or higher)
		Storage ambient temperature		-20 to +85°C -4 to +185°F (No freezing)
		Operating/storage ambient temperature		95% RH or less (No condensation)
		Altitude		No more than 2,000 m 6,561.7' above sea level (reduced ratings at 1,000 m 3,280.8' or higher)
		Vibration resistance		4.9 m/s² 16.1 ft/s² (Compliant with JIS C60068-2-6)
		Impact resistance		19.6 m/s² 64.3 ft/s² (Compliant with JIS C60068-2-27)
		Other		No static noise, strong electric or magnetic fields, or radiation
	Applied standard	UL/CSA standards		UL 61800-5-1, CSA 22.2 No. 274
		CE marking	Machinery Directive	EN 61800-5-1, EN 61800-5-2, EN ISO 13849-1:2015 Cat. 3 PLe, EN IEC 62061 Maximum SIL3
			EMI	EN55011 Class A, EN61800-3, EN61000-6-4
			EMS	EN61800-3, EN61000-6-2
		North America EMI standard		FCC Part 15 B, ICES-003. Class A
	Structure	Type		Base mount installation
	Safety function			STO function (STO/EN 61800-5-2)
	Safety function	Safety parameters		SIL 3 / EN 61508, Maximum SIL 3 / EN IEC 62061, PLe (Category 3) / EN ISO 13849-1:2015
		Response time		4 ms(max)
		Input		STO1, STO2: Power module base block signals Internal impedance: 5.1 kΩ Operable voltage range: +24 V, ±20% Max. delay time: 4 ms (Time from when STO1 and STO2 are turned off until motor current is interrupted)
		Output		EDM: Built-in safety circuit status monitoring (fixed output) Max. allowable voltage: 30 VDC Max. allowable current: 50 mA DC Max. voltage drop at ON: 1.5 V Max. delay time: 4 ms (Time from STO1 and STO2 change to EDM change)
	Protection function			Overcurrent, overvoltage, undervoltage, overload, regenerative error, etc.
	Min. insulation resistance			500 VDC 1 MΩ or more with insulation resistance meter
	Insulation withstand voltage			1,500 VAC or more (between primary side and ground) 3,000 VAC or more (between primary and secondary) 350 VAC: between secondary circuit and ground
	Weight			Approx. 2.8 kg 6.17 lb
Power supply/current capacity and power loss	Main circuit power supply			Three-phase 200 V/DC 270 V
	Max. applicable motor capacity			3.0 kW
	Power supply capacity for 1 amplifier			5.9 kVA
	Output current	Continuous		19.6 Arms
		Max.		56 Arms
	Main circuit power loss			Three-phase 200 V: 114.2 W DC 270 V: 83.5 W
	Regenerative resistor power loss			Three-phase 200 V: 30 W DC 270 V: ―
	Control circuit power loss			16 W
	Total power loss			Three-phase 200 V: 130.2 W DC 270 V: 99.5 W
	Rated input current	Main circuit		Three-phase 200 V: 15 Arms DC 270 V: 20 Arms
		Control circuit		0.25 Arms
	Rush current	Main circuit		34 A ^*3
		Control circuit
Performance specifications	Performance	Speed control range		1:5000 (Under conditions where load torque is equal to or less than rated torque)
		Speed fluctuation rate	At load fluctuation	0 to 100% load variation: ±0.01% or less (at rated rotation speed)
			At main circuit voltage change	Rated voltage ±10%: 0% (at rated rotation speed)
			At ambient temperature change	Ambient temperature 0 to +50°C 32 to 122°F: ±0.1% or less (at rated rotation speed)
		Torque control accuracy (reproducibility)		±1%
		Velocity frequency response		3.1 kHz
	Dynamic brake			Operates at main circuit power off, servo alarm, servo off, limit switch detection (LSP/LSN), and forced stop detection (FSTOP)
	Regenerative resistor			Built-in regenerative resistor: Disabled at 50 to 400 W Enabled at 750 W to 5.0 kW External regenerative resistor: OP-84399 (50 W to 1.0 kW) OP-87073 (1.5 kW^*4)
	Display Function	Panel function		7-segment LED Two rotary switches (16 ch)
		Communication status indicator LED		EtherCAT® communication: L/A × 2 EtherCAT® communication status: RUN×1 EtherCAT® error status: ERR×1
	Servo functions	Tuning		Auto-tuning, notch filter, vibration suppression, damping control, model tracking, friction compensation, load inertia moment ratio variation compensation, deviation reduction, low-frequency vibration suppression, etc.
		Monitor		Lifespan prediction, vibration, load factor, power consumption, temperature, etc.
I/O specifications	Sequence input signal	Number of inputs		7 (3 high-speed inputs, 4 general-purpose inputs)
		Max. input voltage		28.8 VDC
		Rated input voltage		24 VDC
		Min. ON voltage		19 VDC
		Max. OFF current/voltage		High-speed input: 0.1 mA, General-purpose input: 0.3 mA
		Common point mode		7 points/1 common (1 terminal) (bidirectional)
		Input time constant		250 μs, 500 μs, 1 ms, 2.5 ms, 5 ms, 10 ms
		Input current		High-speed input: 4.4 mA, General-purpose input: 4.5 mA
		Input impedance		Approx. 5.1 kΩ
		Assignable input signals		All signal assignment, Logic settable forced stop (FSTOP), Probe 1 latch input (PROBE1), Probe 2 latch input (PROBE2), Home switch input (HOME), Forward side limit switch (LSP), Reverse side limit switch (LSN), Forward side torque limit selection (PTL), Reverse side torque limit selection (NTL)
	Sequence output signal	Number of outputs		4
		Output mode		Transistor NPN output
		Rated load		30 VDC/50 mA
		Leakage current when OFF		0.5 mA
		Residual voltage when ON		1.5 VDC or less
		Common point mode		Independent common
		Assignable output signals		Assignment of each signal except ALARM signal, Logic setting available alarm (ALARM), In-position (INPOS), Velocity matching (VCMP), Zero speed detection (ZSP), Ready to run (RDY), Torque limiting (TLM), Velocity limiting (VLM), Electromagnetic brake timing (BRAKE), Warning (WARN), Near positioning (NEAR)
	Analog Feedback Input signal monitor	Max. input voltage		±12 V
		Accuracy		±1% of F.S.
		Resolution		±12 bits
		Input impedance		30 kΩ
	Encoder division pulse output signal	Output mode		A-phase (A+/A-), B-phase B (B+/B-), Z-phase (Z+/Z-): Differential line driver output
		Line driver		SN75ALS174 (T.I.) equivalent
		Output frequency		1.6 Mpps (at 2-phase quadruplication, equivalent to 6.4 MHz)^*5
	Analog monitor output	No. of channels		2 ch
		Output range		±10 V (Linearity effective range: ±8 V)
		Resolution		16 bits
		Conversion precision		±20 mV (typ.)
		Max. allowable load current		±10 mA
		Conversion speed		1.2 ms (typ.)
Communication specifications	EtherCAT® communication	Applicable communication standards		IEC 61158 Type12, IEC 61800-7 CiA402 Drive Profile
		Physical layer		100 BASE-TX(IEEE802.3)
		Cable		Category 5 STP, 2 pair Automatic cable identification is performed by the AUTO MDI/MDI-X function.
		Mailbox		Emergency messages, SDO requests, SDO responses
		Distributed clocks		Free-run, DC mode (switchable), Supported DC cycles (62.5 μs to 4 ms, in 62.5 μs increments)
		Max. distance between stations		50 m 164.0'
	USB communication	Connected device		PC
		Communication standard		USB 2.0–compliant
		Function		Status display, Parameter settings, Tuning, etc.
^1 Single-phase input can only be used with the SV3-005L2, SV3-010L2, SV3-020L2, SV3-040L2, and SV3-075L2. ^2 When using a DC power supply input, set “AC/DC power supply” to “DC”. ^3 The inrush current duration is 20 ms or less when used at the above current levels. ^4 Depending on operating conditions, 2 kW, 3 kW, and 5 kW servo amplifiers can also be used. ^5 The frequency divider ratio can be set as desired with a parameter.

Keyence MP-FEC600 Keyence

€0,00

Sold Out

Specifications

Model		MP-FEC600
Primary-side rated current (In)		600 A
Over current withstand capability		1.2 times the primary-side rated current (can be applied consecutively)
Max. connectable is correct wire diameter		ø35 1.38"
Mounting method		Clamp method (split core)
Specific error on current load		±1.0% of RD (20%≤In≤100%)
Phase difference on current load		±60’ (20% In) ±60’ (100% In)
Withstand voltage		2300 VAC for 1 minute (across core and output lead)
Insulation resistance		500 VDC/100 MΩ or more (across core and output lead)
Protective element		Internal clamp element
Environmental resistance	Ambient temperature	−10°C to +55°C 14 to 131°F (no freezing)
	Relative humidity	35%RH to 85%RH (no condensation)
Material		Nylon
Weight		Approx. 450 g 15.87 oz (including cable)

Keyence FU-79U Keyence

€130,95

Only 6 units left

Specifications

Model		FU-79U^*1
Optical axis diameter (Standard target to be detected)		ø0.5 mm0.02"
Fibre unit length		1 m39.37" free-cut
Minimum bend radius		R2 mm0.079"
Minimum detectable object		Opaque material with a diameter of 0.005 mm0.0002" ^*2
Tightening torque		0.6 Nm
Environmental resistance	Ambient temperature	-40 to +50 °C -40 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Material		Core fiber : acrylic, fiber sheath : nylon, case : SUS303
Accessories		Fiber cutter, FU adapter, mounting screws
Weight		Approx. 4 g
^1 For details on the detecting distance, see the fiber amplifier catalog. ^2 The minimum detectable object is the value when the detecting distance and sensitivity have been set to their optimal state.

Keyence FT-H40K Keyence

€570,95

Only 6 units left

Specifications

Model		FT-H40K
Type		High temperature, Mid-range
Rated temperature range		32 to 2462°F (0 to 1350°C) ^*1
Displayable temperature range		-58 to 2552°F (-50 to +1400°C)°C
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		100/ø7.5 mm 3.94"/ø0.30" 150/ø6 mm 5.91"/ø0.24" 300/ø11.5 mm 11.81"/ø0.45"
Sight		2-point visible laser beam ^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 μm
Repeatability		±5.4°F (±3°C)
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	14 to 131°F (-10 to 55°C), No freezing
	Relative humidity	35 to 85%, No condensation
	Vibration resistance	10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions
	Shock resistance	500 m/s², 10 times in each direction of each axis (X, Y, Z), 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate, Lens tube: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Accessory		Mounting bracket
Weight		Approx. 150g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^*3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10). The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice.

Keyence OP-87635 Keyence

€382,95

Only 1 unit left

Specifications

Model				OP-87635
Number included				1
Cable end				M12 straight - Loose wire
Length				10 m 32.81'
Material				Cable: PVCConnector: Zinc nickel plating
Weight				Approx. 420 g

Keyence GL-R32L Keyence

€2.536,95

Only 5 units left

Specifications

Model			GL-R32L
Detection capability			ø1.77" ø45 mm
Total length			50.39" 1280mm
No. of beam			32
Detection height			48.82" 1240mm
Protection height			52.17" 1325mm
Beam axis spacing/Lens diameter			40 mm / ø5 1.57" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	7.9
		OFF→ON	50.6^*2
		All blocked→ON	68.3^*3
	Optical synchronization system (Channel A or B)	ON→OFF	10.9
		OFF→ON	55.1^*2
		All blocked→ON	80.2^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m)
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m)
	Leakage current		Max. 200 µA
	Max. capacitive load		2.2 µF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m)
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption (Max.) (mA)	Transmitter	62
		Receiver	80
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C 14 to 131 °F (No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	Storage temperature		-25 to +60 °C -13 to 140 °F (No freezing)
	Storage relative humidity		15 to 95 % RH
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm 0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s² (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		1780 g
	Receiver		1790 g
^1 When the option front protection cover is installed on the one of transmitter or receiver, the Operating distance is shorten by 1.64' 0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by 3.28' 1.0 m. ^2 If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3 “All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4 When the GL-R is used under surrounding air temperatures between 50 to 55°C 122°F to 131°F, the Maximum load current should not exceed 350 mA.

Keyence CV-501 Keyence

€3.370,95

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-87456 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence SZ-V04X Keyence

€3.007,95

Only 9 units left

Specifications

Model				SZ-V04X ^*1
Type				Multi-function Type
Detection capability	Minimum detectable object size			Diameter 20, 30, 40, 50, 70, 150 mm 0.79", 1.18", 1.57", 1.97", 2.76", 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max. ^*2
	Detectable angle			190° ( -5° to 185° )
	Response time (ON to OFF)	Standard Mode	Scan Cycle A	160 ms (2scans) to 1280 ms (16scans) ^3 ^4
			Scan Cycle B	168 ms (2scans) to 1344 ms (16scans) ^3 ^4
			Scan Cycle C	176 ms (2scans) to 1408 ms (16scans) ^3 ^4
		High Speed Mode	Scan Cycle A	80 ms (2scans) to 640 ms (16scans) ^3 ^4
			Scan Cycle B	84 ms (2scans) to 672 ms (16scans) ^3 ^4
			Scan Cycle C	88 ms (2scans) to 704 ms (16scans) ^3 ^4
	Response time (OFF to ON)			Response time (ON to OFF) + 150 ms
	Protection zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		8.4 m 27.56' (Standard Mode) 5.7 m 18.70' (High Speed Mode)
		Minimum detectable object size: 50 mm 1.97"		5.6 m 18.37' (Standard Mode) 3.8 m 12.47' (High Speed Mode)
		Minimum detectable object size: 40 mm 1.57"		4.3 m 14.11' (Standard Mode) 2.9 m 9.51' (High Speed Mode)
		Minimum detectable object size: 30 mm 1.18"		2.9 m 9.51' (Standard Mode) 2.0 m 6.56' (High Speed Mode)
		Minimum detectable object size: 20 mm 0.79"		1.6 m 5.25' (Standard Mode) 1.1 m 3.61' (High Speed Mode)
	Warning zone	Minimum detectable object size: 70 / 150 mm 2.76" / 5.91"		26 m 85.30' (Standard Mode) 23 m 75.46' (High Speed Mode) ^*5
		Minimum detectable object size: 50 mm 1.97"		25 m 82.02' (Standard Mode) 21 m 68.90' (High Speed Mode) ^*5
		Minimum detectable object size: 40 mm 1.57"		24 m 78.74' (Standard Mode) 20 m 65.62’ (High Speed Mode) ^*5
		Minimum detectable object size: 30 mm 1.18"		23 m 75.46' (Standard Mode) 18 m 59.06' (High Speed Mode) ^*5
		Minimum detectable object size: 20 mm 0.79"		21 m 68.90' (Standard Mode) 15 m 49.21' (High Speed Mode) ^*5
	Additional safety distance			100 mm 3.94" ^*6
	Maximum measurement distance			60 m 196.85' ^*7
Maximum number of banks				Max. 4 banks
Multiple scanner heads				Max. 3 scanner heads
Camera monitoring area				Monitor area: over 190° (-5° to 185°) ^*8
Display				QVGA 2.2inch color LCD
Light source	Type, wavelength			Infrared laser diode, 905 nm
	Laser Class	IEC		Class1 IEC/EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice) ^*9
		JIS		Class1 JIS C6802
Control output (OSSD)	Output			Transistor outputs (NPN or PNP is selected in the software)
	Number of outputs			4 outputs
	Max. load current			500 mA ^*10
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	OFF-state voltage			Max. 2.0 V (with a cable length of 5 m 16.40')
	Leakage current			Max. 1 mA ^*11
	Max. capacitive load			2.2 μF (with a load resistance of 100 Ω)
	Load wiring resistance			Max. 2.5 Ω
Inputs	PNP			ON-voltage: 10 to 30 V, OFF-voltage: Open or 0 to 3 V, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
	NPN			ON-voltage: 0 to 3 V, OFF-voltage: Open or 10 V to Power voltage, Short-circuit current: Approx. 2.5 mA (Approx. 10 mA for EDM)
Non-safety related output (AUX output)	Output type			Transistor outputs (NPN or PNP is selected by the dedicated PC software)
	Number of outputs			6 outputs
	Max. load current			Max. 50 mA
	Residual voltage (during ON)			Max. 2.5 V (with a cable length of 5 m 16.40')
	Muting lamp			Incandescent lamp (24 VDC, 1 to 5.5 W) or LED lamp (load current: 10 to 230 mA) can be connected
Interface	USB			USB2.0
	Ethernet	Standard		-
		Transmission rate
		Cable
		Connector
Network function
Cable length	Power and I/O cable			30 m 98.43' or less ^*12
	Between scanner head and display unitc			20 m 65.62' or less each ^*13
	Ethernet cable			-
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, EN ISO13849-1, 2015 (PLd, Category3), UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rating	Power consumption			11.8 W (without load), 55.0 W (with load) ^*14
	Power voltage			24 VDC ±10% (Ripple P-P 10% or less): When using a converter power supply, 24 VDC +20%/-30%: When using a battery
Environmental resistance	Enclosure rating			IP65(IEC60529)
	Ambient light			Incandescent lamp: 1500 lux or less ^*15
	Operating ambient temperature			-10 to +50°C 14 to 122°F (No freezing)
	Operating relative humidity			35% to 85% RH (No condensation)
	Storage temperature			-25 to +60°C -13 to +140°F (No freezing)
	Storage relative humidity			35% to 95% RH
	Vibration resistance			10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions
	Shock resistance			100 m/s² 328.08 ft/s² (Approx. 10 G) 16 ms pulse, in X, Y, Z directions 1000 times each axis
Material	Scanner head	Main unit case		Magnesium
		Window		Polycarbonate, PEI
		Indicator part		Aluminum, PES
	Display unit	Case		Magnesium, PPS, Polycarbonate
	System memory			Aluminum, PPE
Weight				Approx. 2100 g
^1 Integrated models include display unit, scanner head, system memory and a connection cable (SZ-VS005). ^2 If the object to be detected moves parallel to the detection plane, SZ-V cannot detect the object moving at speed over 1.6 m/s 5.25 ft/s, regardless of the encoder setting. ^3 The response time, protection zone, and warning zone are affected by the operation mode. ^4 When using PROFIsafe, 6 ms is added to the response time. When using CIP Safety, 10ms is added to the response time. ^5 20% or more reflectance is necessary for the minimum detectable object in the warning zone. ^6 If there is a highly reflective background within 1.5 m 4.92' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone when calculating the minimum safety distance. ^7 Even when using the network data output, the maximum measured output distance is 60 m 196.85'. ^8 Only applicable for the type with a camera. ^9 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^10 For the SZ-V04 type and the SZ-V32 type, the load current calculation of the OSSD output and AUX output is 1.5 A or less when using one scanner head, 1.0 A or less when using two scanner heads, and 0.5 A or less when using three scanner heads. For the SZ-V32N type, the load current calculation of the OSSD output and AUX output is 1.2 A or less when using one scanner head, 0.8 A or less when using two scanner heads, and 0.3 A or less when using three scanner heads. ^11 Includes when the power is OFF. ^12 10 m 32.81' or less when supplying power from a battery. ^13 When supplying power from a battery, the length of each connection cable should be 10 m 32.81' or less when using two scanner heads, and 5 m 16.40' or less when using three scanner heads. ^14 When using the SZ-V with series connected sensor heads, it is necessary to add 9.4 W per scanner head. Also, power consumption may temporarily be higher (maximum 3.6 W). Power consumption will be within the specification after SZ-V moves to normal operation. ^*15 An ambient light source should not be located within ±5° of the detection plane.

Keyence CV-H200C Keyence

€1.251,95

Only 6 units left

Specifications

Model		CV-H200C
Type		Camera^*1
Image element		1/1.8-inch color CCD image receiving element, 7 x high-speed reading using, square-pixel, 2,010,000 pixels Unit cell size 4.4 x 4.4 µm 0.17 x 0.17 Mil
Valid pixel count		1,920,000 pixels 1600 (H) x 1200 (V) ^*2
Pixel transfer frequency		82 MHz (41 MHz x 2 ch)
Scanning system		Progressive (29.2 ms: 2,000,000-pixel mode 24.2 ms: 1,000,000-pixel mode)
Transfer system		Digital serial transfer
Electronic shutter		1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 msec to 9000 msec can be set with numeric values
Lens mount		C mount
Environmental resistance	Ambient temperature	0 to +40 °C 32 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 130 g (not including lens)
^1 Only the high-speed camera cable can be used. ^2 In 1,000,000-pixel mode, 980,000 pixels (1024 x 960) serve as the processing area.