Lenze

The Lenze EVS9321-CKV003 model is a servo cam profiler designed for precision operations in automation. It has a power rating of 0.37 kW, equivalent to 0.5 horsepower. This device accepts an input voltage ranging from 320 to 440 V AC and operates across an input frequency of 45 to 65 Hz.

For applications using DC mains voltage, the EVS9321-CKV003 accommodates alternative voltage levels between 450 and 620 V. At an operating frequency of 8 kHz, it provides a rated output current of 1.5 A. When the frequency increases to 16 kHz, the rated output current lowers to 1.1 A. The maximum output current at 8 kHz is 2.25 A, while it is 1.65 A at 16 kHz. The standstill current also reaches 2.3 A at the 8 kHz setting.

Output voltage characteristics vary based on choke usage. When a choke is in place, the output is 94% of the mains voltage, whereas it can reach the full mains voltage without a choke. The power loss for this profiling unit has been determined to be 100 W. To accommodate different operational requirements, the module offers switching frequencies of both 8 kHz and 16 kHz. Additionally, the design allows for a maximum overcurrent duration of one minute, ensuring reliable performance within specified parameters.

The Lenze EVS9321-CRV003 serves as a servo register controller suitable for various industrial applications. This unit is designed to handle mains voltage input that ranges from 320 to 528 V AC, remaining stable over a frequency range of 45 Hz to 65 Hz. The innovation in design utilizes a cold plate technique, which enhances operational efficiency through effective heat dissipation.

For motor operations, this controller delivers a power output of 0.37 kW with a notable performance rated at an output power of 1.0 kVA when working at 400 V and 1.2 kVA at 480 V. Operating at an output frequency of 8 kHz, it can manage a current of 1.5 A, and at 16 kHz, the output current is rated at 1.1 A. The module also boasts high performance with its maximum output currents, reaching 2.3 A at 8 kHz and 1.7 A at 16 kHz. The standstill current values remain the same, reflecting the controller's robust design.

In applications where an alternative DC supply is required, the unit can accommodate input voltages of 460 to 740 V DC. At full load, the power loss is measured at 100 W, ensuring efficient operation. Additionally, the power derating factor is set at 2% per Kelvin for temperature ranges between 40°C and 55°C, enabling the controller to maintain reliable performance in varying thermal conditions.

Lenze’s EVF9383-EVV060 frequency inverter module provides a robust solution for various industrial applications. It is specified for use with an input voltage range of 340-456V AC, allowing flexibility to accommodate different systems. The EVF9383-EVV060 frequency inverter module connects directly to the back panel of a control cabinet, enhancing ease of installation.

Operating with a 45-65 Hz supply frequency, the EVF9383-EVV060 frequency inverter utilizes a standard design to maintain consistent application performance. It is rated to handle a mains current 713A, supporting heavy electrical demands. With a significant motor power rating of 550 HP, the inverter module is well-suited for driving large motors efficiently.

The EVF9383-EVV060 frequency inverter module operates in environments between 0 °C and +50 °C, ensuring its suitability for various industrial conditions. This inverter module is IP20-rated, offering basic protection against dust and moisture, making it ideal for indoor use. The unit's weight with its RFI filter is 430 kg, representing a substantial component for industrial setups.

The Lenze EVF9383-EVV110 is a frequency inverter designed for industrial applications. This device supports an input voltage of 340V to 456V AC, providing versatility in power configurations. It is suitable for demanding motor operations and can handle a substantial motor power of 550 HP.

The EVF9383-EVV110 frequency inverter's standard design allows for mounting on the back panel of control cabinets, integrating seamlessly into various systems. It operates effectively across a supply frequency range of 45 to 65 Hz, ensuring compatibility with many electrical environments.

The EVF9383-EVV110 inverter has an IP20 enclosure rating, protecting it against solid foreign objects 12 mm or larger. It is more suited for indoor use in protected environments. The operational temperature can vary from 0 °C to +50 °C, making the unit adaptable to different industrial conditions.

Weighing in at 430 kg when including the RFI filter, the EVF9383-EVV110 frequency inverter emphasizes robust construction. With a maximum mains current rating of 713 A, this inverter can handle significant power demands, making it suitable for high-performance applications. This frequency inverter does not include provisions for an alternative DC supply voltage, focusing strictly on its designed capabilities.

The Lenze EVS9238-ES functions as a servo controller, suitable for industrial setups requiring reliability and performance. It operates efficiently with a rated active power of 0.37 kilowatt and can handle an input phase comprising 3-phase power.

Input voltage specifications range from 400 to 480 volts AC, while the controller efficiently operates at an input frequency between 50 and 60 Hertz. The output frequency capability extends from 0 up to 480 Hertz, providing versatility in various applications. The output voltage of this unit also spans from 0 to 480 volts AC, making it adaptable to different motor specifications.

The device has a current rating of 2.4 amperes, supporting its role in system integration without compromising safety. Additionally, this controller supports an ambient operating temperature range between -10 to 60 degrees Celsius, while the storage temperature capacity allows for a range from -25 to 60 degrees Celsius, showcasing its resilience to environmental variations.

Installation is simplified through its panel mounting design, and the IP20 protection class indicates suitability for indoor environments free from significant moisture and dust. Notably, the EVS9238-ES features an LED display for operational feedback and may include optional features like safe breaking torque, enhancing its functionality in various scenarios.

Lenze's EVF9383-EVV030 is a robust frequency inverter for demanding industrial applications. It is built to integrate into the back panel of a control cabinet for effective use in electrical environments. The EVF9383-EVV030 inverter supports a voltage supply range of 340 to 456V AC but does not accommodate an alternative DC supply voltage.

The EVF9383-EVV030 frequency inverter's design follows standard conventions and adheres to an IP20 enclosure rating, providing basic protection against dust and solid objects. This inverter operates efficiently within a defined temperature range, from 0 °C to +50 °C, ensuring reliable performance in typical industrial conditions. Its weight of 430 kg when utilizing the RFI filter is substantial, indicating a robust construction capable of handling high loads.

The EVF9383-EVV030 frequency inverter is built to manage significant electrical demands, with a mains current of 713A. With the capability to support motors with a power rating of 550 HP, the EVF9383-EVV030 is suitable for powerful drives in automation systems. The supply frequency is compatible with 45 to 65 Hz, allowing broad applications across various settings. This inverter exemplifies Lenze's commitment to producing durable and efficient components for modern automation solutions.

Lenze's EVF9383-EV frequency inverter module is designed for high-performance applications. This unit operates with a supply voltage rated between 340 and 456 volts AC, which accommodates a variety of industrial operations. It is designed to work within a frequency range of 45 to 65 Hz, ensuring consistent performance across different input conditions. The EVF9383-EV frequency inverter's rated motor power capacity is 550 HP, allowing it to manage demanding motor applications effectively.

The EVF9383-EV frequency inverter's IP20 enclosure rating signifies that the module is suitable for mounting on the control cabinets' back panel without moisture exposure. It has a mains current specification of 713A, reinforcing its suitability for heavy-load management. The temperature range for optimal operation spans from 0 °C to +50 °C, providing flexibility for use in various industrial environments. With a total weight of 430 kg when including the RFI filter, the EVF9383-EV frequency inverter is built for durability and robustness in demanding installations, making it a reliable choice in industrial frequency control.

Lenze has developed the EVF9382-EV frequency inverter module as part of its Series 9300 lineup. This robust module is designed for installation on the back panel of a control cabinet, facilitating easy integration into larger systems. It can provide substantial power outputs with an operational voltage range of 340 to 456 volts AC. It operates efficiently under a supply frequency of 45 Hz to 65 Hz, making it adaptable to various operational environments.

The EVF9382-EV frequency inverter's design accommodates a mains current of 570 Amps, which indicates its capacity to drive high-power applications. This inverter module is rated to manage a motor power of 450 HP, which is suitable for demanding industrial tasks. It functions optimally within an operating temperature range of 0 °C to +50 °C, allowing versatility in temperature-sensitive environments.

As for its construction, the EVF9382-EV frequency inverter has an IP20 rating, indicating protection against solid objects larger than 12.5 mm but no protection against water ingress, making it strictly for indoor usage. The overall weight of the EVF9382-EV module, including the RFI filter, is 350 kilograms, reflecting its robust build quality.

Lenze's EVF9382-EVV110 frequency inverter is engineered for heavy-duty applications, making it an optimal choice for industrial settings. With a supply voltage range of 340 to 456V AC, this inverter can meet the high power demands common in various machinery. It features a standard design and is specifically intended for installation on the back panel of control cabinets.

The EVF9382-EVV110 frequency inverter achieves substantial mains current handling capabilities, rated at 570A, which supports its performance in demanding scenarios. The inverter can manage a motor power of up to 450 HP and is designed to facilitate precision control and efficiency.

The EVF9382-EVV110 frequency inverter's operating temperature ranges from 0 °C to +50 °C, allowing for effective performance in typical industrial environments. It does not offer an alternative DC supply voltage, focusing solely on AC input. Protection rated at IP20 safeguards it from dust ingress and provides touch protection against accidental contact while ensuring that it meets the expectations of rugged industrial use. Overall, the Lenze EVF9382-EVV110 is built to provide reliable service in precise applications where power management is critical.

The Lenze EVF9382-EVV060 frequency inverter module is built to provide crucial drive control for motors. It operates on an AC supply voltage between 340 and 456 volts. This inverter is specifically designed to be mounted on the back panel of control cabinets, facilitating straightforward installation and integration into existing systems.

The EVF9382-EVV060 frequency inverter has an IP20 rating, protecting it against solid objects larger than 12 mm, making it suitable for indoor use. With mains current capabilities of 570A, this module can manage significant electrical loads. It serves a wide application range with a rated motor power of up to 450, achieving effective motor control in various operations.

This standard-designed inverter accommodates operational frequencies from 45 Hz to 65 Hz and can function within a temperature range extending from 0 °C to 50 °C. Weighing in at 350 kilograms with the RFI filter included, the EVF9382-EVV060 frequency inverter substantially contributes to robust industrial automation setups. However, it's worth noting that it does not support an alternative direct current supply.

Offering robust capabilities, the Lenze EVF9381-EVV110 frequency inverter is engineered to meet industrial demands. This device operates effectively on supply voltages ranging from 340 to 456 volts AC. It is designed for standard applications and supports a frequency range of 45 to 65 Hz. Its mounting is suited for the back panel of a control cabinet, ensuring a compact and organized installation.

The EVF9381-EVV110 frequency inverter is rated for a mains current of 475 Amps, making it suitable for heavy-duty applications. It can power motors up to 350 horsepower. Regarding environmental specifications, the operating temperature can vary between 0 °C and +50 °C, enabling reliable performance in diverse conditions.

With an IP20 rating, the EVF9381-EVV110 frequency inverter offers basic protection against dust and touch contact. When the RFI filter is included in the configuration, it weighs 350 kg. The EVF9381-EVV110 frequency inverter does not accommodate an alternative DC supply voltage, focusing solely on AC inputs, thus effectively delivering direct power to applications.

The Lenze EVF9382-EVV030 frequency inverter is engineered for high-performance applications in industrial settings. It operates on a supply voltage between 340 and 456 volts AC, accommodating a wide range of operational requirements. Capable of handling a motor power of 450 HP, this inverter effectively manages substantial loads. For optimal performance, it requires a mains current draw of 570 A.

Constructed with an IP20 rating, the device provides basic protection against solid objects, making it suitable for installation in controlled environments. The EVF9382-EVV030 frequency inverter supports supply frequencies ranging from 45 to 65 Hz, allowing it to match various electrical systems.

The EVF9382-EVV030 frequency inverter is designed for installation on the back panel of a control cabinet, providing a space-saving solution while maintaining accessibility. Weighing in at 350 kg when paired with the RFI filter, the EVF9382-EVV030 is built to endure the rigors of operational demands. It functions efficiently in a temperature range from 0 °C to +50 °C. No alternative DC supply voltage option is available, prioritizing AC input for its operation. The standard design of the EVF9382-EVV030 ensures compatibility with existing systems, making it a viable choice for enhancing automation processes.

In industrial automation, the Lenze EVF9381-EVV060 module stands out as a highly capable frequency inverter module. It functions within a broad supply voltage satisfaction of 340 to 456 volts AC. This module is engineered for efficiency and built to mount on the back panel of control cabinets, ensuring compactness in installation.

Rated for a supply frequency between 45 Hz and 65 Hz, the EVF9381-EVV060 frequency inverter module's design is standard, offering reliable performance across varying operational demands. Its rated operating temperature range is between 0 °C and +50 °C, allowing it to perform in environments conducive to industrial operations.

With the capacity to manage a mains current of 475 A, the EVF9381-EVV060 is robust enough to handle motor power needs of up to 350 horsepower, making it suitable for heavy-duty applications. When equipped with an RFI filter, it weighs approximately 350 kg, reflecting the substantial construction necessary for its operational capabilities. Overall, the Lenze EVF9381-EVV060 frequency inverter module is an excellent choice for integration into systems requiring reliable and efficient power conversion.

Lenze's EVF9381-EV frequency inverter module is engineered for reliable motor control in demanding industrial environments. This device functions at a supply voltage between 340 and 456 volts AC, providing flexibility for various applications. With a substantial motor power capability of 350 HP, it is adept at managing high-performance tasks in modern manufacturing processes.

The design incorporates an IP20 rating, which offers basic protection against dust ingress and touch risks, making it a practical choice for installation in control cabinets. The unit's mounting method is streamlined, allowing it to be securely affixed to the back panel of such cabinets. With a mains current capacity of 475A, it ensures adequate power handling for substantial loads without compromising on performance.

Operating effectively at supply frequencies ranging from 45 to 65 Hz, the EVF9381-EV module meets the diverse operational needs of industrial motor control. Additionally, it can withstand ambient temperatures between 0 °C and +50 °C, ensuring functionality in various temperature conditions. This frequency inverter, weighing 350 kg when equipped with an RFI filter, embodies the robustness required for industrial applications, ensuring longevity and resilience under rigorous operating conditions.

The Lenze EVF9338-EV is a robust frequency inverter that is crucial in industrial automation systems. With a voltage input range of 340 to 456 volts AC, it is engineered to handle various operational demands efficiently. This frequency inverter operates at a supply frequency between 45 Hz and 65 Hz, enabling compatibility with a wide range of motor applications.

Designed for mounting on the back panel of a control cabinet, the EVF9338-EV inverter is straightforward to install and integrate into existing setups. The device is rated IP20, providing sufficient protection against solid objects, making it suitable for indoor use without excessive dust or moisture exposure.

The EVF9338-EV frequency inverter functions effectively in temperatures from 0 °C to +50 °C, which is ideal for common industrial environments. When equipped with an RFI filter, it weighs 215 kg, contributing to its stability and reliability. With a rated motor power of 300 horsepower and a mains current of 356 amps, this inverter can handle demanding applications while ensuring consistent performance.

Lenze's EVF9381-EVV030 is a formidable frequency inverter within the Series 9300. It is designed specifically for robust applications and operates efficiently with an input voltage range of 340-456V AC. The EVF9381-EVV030 frequency inverter provides reliable control, making it suitable for systems requiring up to 350 HP of motor power.

This frequency inverter model is crafted without an alternative DC supply voltage option, focusing solely on AC operation. It supports a supply frequency of 45 to 65 Hz, allowing flexibility in various installation scenarios. The back panel mounting method is optimized for convenient integration into control cabinets.

The EVF9381-EVV030 frequency inverter features an IP20 enclosure rating, ensuring protection from solid objects. This makes it well-suited for controlled environments. The device can operate within an ambient temperature range of 0 °C to +50 °C.

Moreover, the EVF9381-EVV030 frequency inverter has a mains current rating of 475A, a significant capability for handling robust applications. With an RFI filter included, the inverter weighs 350 kg, reinforcing its sturdiness and reliability in diverse operating conditions.

The EVF9337-EVV110, developed by Lenze, functions as a frequency inverter module tailored for controlling motors efficiently. It supports a supply voltage spectrum of 340 to 456 volts AC, accommodating diverse industrial applications. The EVF9337-EVV110 frequency inverter module is rated for a considerable motor output of 250 horsepower, signifying its capacity to handle demanding tasks.

With an IP20 rating, this module provides a reasonable level of protection against dust ingress, making it suitable for standard installation environments. It is designed to be mounted on the back panel of a control cabinet, facilitating space-efficient integration within existing systems. The device operates well under a supply frequency between 45 and 65 Hertz, ensuring compatibility with various power systems.

The EVF9337-EVV110 frequency inverter module's mains current draw of 285 Amps indicates a robust performance capability. The unit can function within an ambient temperature range of 0 °C to +50 °C. Its weight of 175 kilograms, including the RFI filter, underlines the unit's substantial build quality and durability, making it reliable for prolonged use in industrial applications.