1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | Analog I/O expansion block |
| Accessory / separate part destination | Analog sensors/actuators |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | Flying lead with 1 male connector M12 - A coding - 5 ways - elbowed |
| Cable length | 16.4 ft (5 m) |
| Product Weight | 0.569 lb(US) (0.258 kg) |
This Multi9 C60H-DC is a low voltage miniature circuit breaker (MCB) dedicated to direct current. It is a 1P circuit breaker with 1 protected pole, 25A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 10kA at 220VDC conforming to EN/IEC 60947-2 standard and 10kA at 220VDC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 250VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 18mm x (H) 81mm x (D) 73mm. The weight is 0.128kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| product name | Multi9 C60H-DC |
| Product or Component Type | Miniature circuit-breaker |
| Device short name | C60H-DC |
| Device Application | Distribution |
| Poles description | 1P |
| Number of protected poles | 1 |
| Line Rated Current | 25 A 77 °F (25 °C) EN/IEC 60947-2 |
| Network type | DC |
| Trip unit technology | Thermal-magnetic |
| Curve code | D |
| Breaking capacity | 10 kA Icu 220 V DC EN/IEC 60947-2 6 kA Icu 250 V DC EN/IEC 60947-2 20 kA Icu 110 V DC EN/IEC 60947-2 5 kA AIR 12...250 V DC UL 1077 10 kA Icu 220 V DC GB 14048.2 6 kA Icu 250 V DC GB 14048.2 20 kA Icu 110 V DC GB 14048.2 |
| Utilisation category | Category A EN/IEC 60947-2 |
| Standards | EN/IEC 60947-2 GB 14048.2 UL 1077 |
| Product certifications | IEC CCC UR |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 250 V DC 110 V DC 220 V DC |
| Magnetic tripping limit | 10...14 x In DC |
| [Ics] rated service breaking capacity | 7.5 kA 75 % EN/IEC 60947-2 - 220 V DC 4.5 kA 75 % EN/IEC 60947-2 - 250 V DC 15 kA 75 % EN/IEC 60947-2 - 110 V DC 7.5 kA 75 % GB 14048.2 - 220 V DC 4.5 kA 75 % GB 14048.2 - 250 V DC 15 kA 75 % GB 14048.2 - 110 V DC |
| [Ui] rated insulation voltage | 500 V DC EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kVEN/IEC 60947-2 |
| Suitability for isolation | Yes EN/IEC 60947-2 |
| Contact position indicator | Yes |
| Control Type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting Mode | Clip-on |
| Mounting Support | DIN rail |
| 9 mm pitches | 2 |
| Height | 3.2 in (81 mm) |
| Width | 0.7 in (18 mm) |
| Depth | 2.9 in (73 mm) |
| Product Weight | 0.282 lb(US) (0.128 kg) |
| color | Gray |
| Mechanical durability | 20000 cycles |
| Electrical durability | 3000 cycles 250 V DC L/R = 2 ms 6000 cycles 250 V DC |
| Provision for padlocking | Padlockable |
| Connections - terminals | Tunnel type terminal top or bottom) 0.002â¦0.05 in² (1â¦35 mm²) AWG 18...AWG 2) - rigid stranded Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 4) - flexible Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 4) - flexible with ferrule Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - rigid stranded Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible with ferrule Tunnel type terminal top or bottom) - 3 0.006 in² (4 mm²) AWG 6) - flexible stranded |
| Wire stripping length | 0.6 in (14 mm) for top or bottom connection |
| Tightening torque | 31.0 lbf.in (3.5 N.m) top or bottom |
| Earth-leakage protection | Without |
This Multi9 C60H-DC is a low voltage miniature circuit breaker (MCB) dedicated to direct current. It is a 1P circuit breaker with 1 protected pole, 3A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 10kA at 220VDC conforming to EN/IEC 60947-2 standard and 10kA at 220VDC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 250VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 18mm x (H) 81mm x (D) 73mm. The weight is 0.128kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| product name | Multi9 C60H-DC |
| Product or Component Type | Miniature circuit-breaker |
| Device short name | C60H-DC |
| Device Application | Distribution |
| Poles description | 1P |
| Number of protected poles | 1 |
| Line Rated Current | 3 A 77 °F (25 °C) EN/IEC 60947-2 |
| Network type | DC |
| Trip unit technology | Thermal-magnetic |
| Curve code | D |
| Breaking capacity | 10 kA Icu 220 V DC EN/IEC 60947-2 6 kA Icu 250 V DC EN/IEC 60947-2 20 kA Icu 110 V DC EN/IEC 60947-2 5 kA AIR 12...250 V DC UL 1077 10 kA Icu 220 V DC GB 14048.2 6 kA Icu 250 V DC GB 14048.2 20 kA Icu 110 V DC GB 14048.2 |
| Utilisation category | Category A EN/IEC 60947-2 |
| Standards | EN/IEC 60947-2 GB 14048.2 UL 1077 |
| Product certifications | IEC CCC UR |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 250 V DC 110 V DC 220 V DC |
| Magnetic tripping limit | 10...14 x In DC |
| [Ics] rated service breaking capacity | 7.5 kA 75 % EN/IEC 60947-2 - 220 V DC 4.5 kA 75 % EN/IEC 60947-2 - 250 V DC 15 kA 75 % EN/IEC 60947-2 - 110 V DC 7.5 kA 75 % GB 14048.2 - 220 V DC 4.5 kA 75 % GB 14048.2 - 250 V DC 15 kA 75 % GB 14048.2 - 110 V DC |
| [Ui] rated insulation voltage | 500 V DC EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kVEN/IEC 60947-2 |
| Suitability for isolation | Yes EN/IEC 60947-2 |
| Contact position indicator | Yes |
| Control Type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting Mode | Clip-on |
| Mounting Support | DIN rail |
| 9 mm pitches | 2 |
| Height | 3.2 in (81 mm) |
| Width | 0.7 in (18 mm) |
| Depth | 2.9 in (73 mm) |
| Product Weight | 0.282 lb(US) (0.128 kg) |
| color | Gray |
| Mechanical durability | 20000 cycles |
| Electrical durability | 3000 cycles 250 V DC L/R = 2 ms 6000 cycles 250 V DC |
| Provision for padlocking | Padlockable |
| Connections - terminals | Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 4) - rigid stranded Tunnel type terminal top or bottom) 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible Tunnel type terminal top or bottom) 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible with ferrule Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦10 mm²) AWG 18...AWG 8) - rigid stranded Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦10 mm²) AWG 18...AWG 8) - flexible Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦10 mm²) AWG 18...AWG 8) - flexible with ferrule Tunnel type terminal top or bottom) - 3 0.002 in² (1 mm²) AWG 18) - flexible stranded |
| Wire stripping length | 0.6 in (14 mm) for top or bottom connection |
| Tightening torque | 22.1 lbf.in (2.5 N.m) top or bottom |
| Earth-leakage protection | Without |
This potentiometer is a replacement part for variable speed drives. Its internal conversion resistance is 2.2kOhm. It has an IP20 protection index. This potentiomter is used if it is found that the one in use is damaged. It is compatible with the full Altivar ranges. The product is delivered in two packages. The Altivar Machine ATV320 series focus on easy integration for simple and advanced machine requirements with proven motor control and connectivity. ATV320 drives are specifically designed for material handling, packaging, textiles, hoisting, mechanical actuators, and material working.
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Replacement part |
| Accessory / Separate Part Type | Potentiometer |
Complementary
| Characteristic | Value(s) |
|---|---|
| Internal conversion resistor | 2.2 kOhm |
Multi 9 - C60H-DC - MCB - 1P - 50 A - C Curve - 250 V DC - 10 kA
Multi 9 - C60H-DC - MCB - 1P - 63 A - D Curve - 250 V DC - 10 kA
Multi 9 - C60H-DC - MCB - 1P - 16 A - C Curve - 250 V DC - 10 kA
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | I/O and interface blocks |
| Accessory / separate part destination | 24 V DC bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | Flying lead with 1 male connector M8 - 4 ways - elbowed bus OUT |
| Cable length | 82.02 ft (25 m) |
| Product Weight | 1.784 lb(US) (0.809 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | I/O and interface blocks |
| Accessory / separate part destination | 24 V DC bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | Flying lead with 1 female connector M8 - 4 ways - elbowed bus IN |
| Cable length | 3.3 ft (1 m) |
| Product Weight | 0.090 lb(US) (0.041 kg) |
Multi 9 - C60H-DC - MCB - 1P - 16 A - D Curve - 250 V DC - 10 kA
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Connector |
| Product or Component Type | Cable connector |
| Quantity per Set | 1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Marking | CE |
KNX ARGUS 180/2.20 m flush-mounted, anthracite, System M
Multi 9 - C60H-DC - MCB - 1P - 4 A - C Curve - 250 V DC - 10 kA
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | I/O and interface blocks |
| Accessory / separate part destination | 24 V DC bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | 1 male + 1 female connectors M8 - 4 ways - elbowed |
| Cable length | 3.3 ft (1 m) |
| Product Weight | 0.11 lb(US) (0.05 kg) |
This Multi9 product is a set of 4 cable connectors. It accepts a rigid or flexible cable cross-section from 6mm² to 35mm². It is compatible with C60BP device. The tightening torque is 3.5N.m. The color of the device is white (RAL 9001).
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Multi9 |
| Product or Component Type | Connector |
| Accessory / separate part category | Connection accessory |
| Quantity per Set | Set of 4 |
| Standards | UL 486E EN/IEC 61439-1 |
| Product certifications | CURus IEC |
Complementary
| Characteristic | Value(s) |
|---|---|
| Line Rated Current | 63 A |
| [Ui] Rated Insulation Voltage | 1000 V |
| Connection pitch | 0.7 in (18 mm) |
| color | White RAL 9001) |
| Connections - terminals | Screw terminal top connector 0.009â¦0.05 in² (6â¦35 mm²) rigid Screw terminal top connector 0.009â¦0.05 in² (6â¦35 mm²) flexible |
| Tightening torque | 31.0 lbf.in (3.5 N.m) |
| Range compatibility | Multi9 C60BP comb busbar |
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | I/O and interface blocks |
| Accessory / separate part destination | 24 V DC bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | Flying lead with 1 male connector M8 - 4 ways - straight bus OUT |
| Cable length | 82.02 ft (25 m) |
| Product Weight | 1.784 lb(US) (0.809 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Connecting cable |
| Product or Component Type | Pre-assembled Ethernet cable with RJ45 connectors |
| Accessory / separate part destination | Ethernet network |
| Cable length | 3.3 ft (1 m) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Transmission support medium | Twisted shielded pairs cable |
| Communication network category | 5e |
| AWG Gauge | AWG 24 |
| Electrical connection | 2 connectors, RJ45 straight 8 |
| Marking | CE |
| Cover Material | PUR |
Main
| Characteristic | Value(s) |
|---|---|
| Accessory / separate part category | Connection accessories |
| Product or Component Type | Connecting cable |
| Product Compatibility | I/O and interface blocks |
| Accessory / separate part destination | 24 V DC bus |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range Compatibility | Modicon TM7 |
| Electrical connection | 1 male + 1 female connectors M8 - 4 ways - straight |
| Cable length | 6.6 ft (2 m) |
| Product Weight | 1.784 lb(US) (0.809 kg) |
This Multi9 C60H-DC is a low voltage miniature circuit breaker (MCB) dedicated to direct current. It is a 1P circuit breaker with 1 protected pole, 40A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 10kA at 220VDC conforming to EN/IEC 60947-2 standard and 10kA at 220VDC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 250VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 18mm x (H) 81mm x (D) 73mm. The weight is 0.128kg. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| product name | Multi9 C60H-DC |
| Product or Component Type | Miniature circuit-breaker |
| Device short name | C60H-DC |
| Device Application | Distribution |
| Poles description | 1P |
| Number of protected poles | 1 |
| Line Rated Current | 40 A 77 °F (25 °C) EN/IEC 60947-2 |
| Network type | DC |
| Trip unit technology | Thermal-magnetic |
| Curve code | D |
| Breaking capacity | 10 kA Icu 220 V DC EN/IEC 60947-2 6 kA Icu 250 V DC EN/IEC 60947-2 20 kA Icu 110 V DC EN/IEC 60947-2 5 kA AIR 12...250 V DC UL 1077 10 kA Icu 220 V DC GB 14048.2 6 kA Icu 250 V DC GB 14048.2 20 kA Icu 110 V DC GB 14048.2 |
| Utilisation category | Category A EN/IEC 60947-2 |
| Standards | EN/IEC 60947-2 GB 14048.2 UL 1077 |
| Product certifications | IEC CCC UR |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 250 V DC 110 V DC 220 V DC |
| Magnetic tripping limit | 10...14 x In DC |
| [Ics] rated service breaking capacity | 7.5 kA 75 % EN/IEC 60947-2 - 220 V DC 4.5 kA 75 % EN/IEC 60947-2 - 250 V DC 15 kA 75 % EN/IEC 60947-2 - 110 V DC 7.5 kA 75 % GB 14048.2 - 220 V DC 4.5 kA 75 % GB 14048.2 - 250 V DC 15 kA 75 % GB 14048.2 - 110 V DC |
| [Ui] rated insulation voltage | 500 V DC EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kVEN/IEC 60947-2 |
| Suitability for isolation | Yes EN/IEC 60947-2 |
| Contact position indicator | Yes |
| Control Type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting Mode | Clip-on |
| Mounting Support | DIN rail |
| 9 mm pitches | 2 |
| Height | 3.2 in (81 mm) |
| Width | 0.7 in (18 mm) |
| Depth | 2.9 in (73 mm) |
| Product Weight | 0.282 lb(US) (0.128 kg) |
| color | Gray |
| Mechanical durability | 20000 cycles |
| Electrical durability | 3000 cycles 250 V DC L/R = 2 ms 6000 cycles 250 V DC |
| Provision for padlocking | Padlockable |
| Connections - terminals | Tunnel type terminal top or bottom) 0.002â¦0.05 in² (1â¦35 mm²) AWG 18...AWG 2) - rigid stranded Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 4) - flexible Tunnel type terminal top or bottom) 0.002â¦0.04 in² (1â¦25 mm²) AWG 18...AWG 4) - flexible with ferrule Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - rigid stranded Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible Tunnel type terminal top or bottom) - 2 0.002â¦0.02 in² (1â¦16 mm²) AWG 18...AWG 6) - flexible with ferrule Tunnel type terminal top or bottom) - 3 0.006 in² (4 mm²) AWG 6) - flexible stranded |
| Wire stripping length | 0.6 in (14 mm) for top or bottom connection |
| Tightening torque | 31.0 lbf.in (3.5 N.m) top or bottom |
| Earth-leakage protection | Without |
Multi 9 - C60H-DC - MCB - 1P - 4 A - D Curve - 250 V DC - 10 kA
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| Product or Component Type | Comb busbar |
| Mounting Mode | Horizontal |
| Accessory / separate part category | Connection accessory |
| Lines description | 2L |
| Length in 18 mm modules | 56 |
| Standards | UL 508 UL 489 EN/IEC 61439-1 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Number of ways | 28 ways 2 L |
| Poles configuration for 1 way | 1 x 2P |
| Connection pitch | 0.7 in (18 mm) |
| Connector type | tooth |
| Distance between way | 1.4 in (36 mm) |
| Insulation | Insulated |
| Device presentation | Cuttable |
| [Ie] rated operational current | 80 A 104 °F (40 °C) |
| [Ue] rated operational voltage | 480 V AC 50/60 Hz Ph/Ph 277 V AC 50/60 Hz Ph/N |
| [Ui] rated insulation voltage | 1000 V AC 50/60 Hz UL 508 |
| Mounting location | Top tunnel type terminals |
| 9 mm pitches | 112 |
| Width | 39.7 in (1008 mm) |
| color | Light gray RAL 7035) |
| Range compatibility | Multi9 Multi9 C60BP |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | ConneXium |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Connector |
| Product or Component Type | Cable connector |
Complementary
| Characteristic | Value(s) |
|---|---|
| Electrical connection | 1 connector D coding |
Main
| Characteristic | Value(s) |
|---|---|
| Range | Merten |
| Aesthetic name | M-Plan glass M-Plan M-Smart System M M-Star M-Elegance M-Arc |
| Product or component type | Movement detector |
| Device presentation | Mechanism with fixing frame and central plate |
| Bus type | KNX |
| Number of channels | 5 |
| Colour tint | Active white (RAL 9016) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Type of setting | Light sensitivity adjustable |
| Device mounting | Flush |
| Mounting height | 1.1 m |
| Duty cycle | 15300 minutes |
| Time delay | 1 second switch-on |
| Movement detection area | 16 m |
| Detection angle | 180° horizontal |
| Detection face | Lateral: 8 m |
| Material | Plastic brilliant |
| surface treatment | Antibacterial |
This Multi9 C60BPR is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 50A rated current and D tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 127mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range | Multi9 |
| product name | Multi9 C60 |
| Product or Component Type | Miniature circuit-breaker |
| Device short name | C60BPR |
| Device Application | Distribution |
| Poles description | 3P |
| Number of protected poles | 3 |
| Line Rated Current | 50 A 77 °F (25 °C) EN/IEC 60947-2 |
| Network type | AC |
| Trip unit technology | Thermal-magnetic |
| Curve code | D |
| Breaking capacity | 6 kA Icu 440 V AC EN/IEC 60947-2 10 kA Icu 415 V AC EN/IEC 60947-2 20 kA Icu 240 V AC EN/IEC 60947-2 6 kA Icu 440 V AC GB 14048.2 10 kA Icu 415 V AC GB 14048.2 20 kA Icu 240 V AC GB 14048.2 10 kA AIR 240 V AC UL 489 10 kA AIR 240 V AC CSA C22.2 No 5 |
| Standards | EN/IEC 60947-2 GB 14048.2 UL 489 CSA C22.2 No 5 |
| Product certifications | IEC CCC CSA UL |
Complementary
| Characteristic | Value(s) |
|---|---|
| [Ue] rated operational voltage | 240 V AC 50/60 Hz 415 V AC 50/60 Hz 440 V AC 50/60 Hz |
| Magnetic tripping limit | 12 x In +/- 20 % AC |
| [Ics] rated service breaking capacity | 4.5 kA 75 % EN/IEC 60947-2 - 440 V AC 7.5 kA 75 % EN/IEC 60947-2 - 415 V AC 15 kA 75 % EN/IEC 60947-2 - 240 V AC 4.5 kA 75 % GB 14048.2 - 440 V AC 7.5 kA 75 % GB 14048.2 - 415 V AC 15 kA 75 % GB 14048.2 - 240 V AC |
| [Ui] rated insulation voltage | 500 V AC EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 6 kVEN/IEC 60947-2 |
| Suitability for isolation | Yes EN/IEC 60947-2 |
| Contact position indicator | Yes |
| Control Type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting Mode | Clip-on |
| Mounting Support | DIN rail |
| 9 mm pitches | 6 |
| Height | 5.0000000000 in (127 mm) |
| Width | 2.1 in (54 mm) |
| Depth | 2.8 in (72 mm) |
| color | Gray |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Provision for padlocking | Padlockable |
| Connections - terminals | Ring terminal top or bottom) |
| Tightening torque | 17.7 lbf.in (2 N.m) top or bottom |
| Earth-leakage protection | Without |