Distance & Measurement Sensors

€0,00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 30/D485-30M-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL96BMC6052000 Leuze

€2.769,95

Only 3 units left

Leuze Optical Distance Sensor (P/N: ODSL96BMC6052000). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Leuze ODSL8C66-200-S12 Leuze

€0,00

Sold Out

Leuze Optical Distance Sensor (P/N: ODSL 8/C66-200-S12). Laser or LED distance measurement sensor providing precise analog and switching outputs for position control, height measurement, and loop control. High accuracy with configurable measuring range and IO-Link communication for factory automation.

Keyence LR-XN11C Keyence

€374,95

In stock, 17 units

Specifications

Model		LR-XN11C
Type		NPN Output/PNP Output (Selectable output)
Cable/Connector		M8 connector^*1
Main Unit/Expansion Unit		Main Unit (expansion not possible)
No. of Control Outputs		2^*2
No. of External Inputs		1^*2
Response Time		500 µs^*3/1 ms/3 ms/10 ms/200 ms Selectable
IO-Link		Specification v1.1/COM2 (38.4 kbps)
Functions	Timer Function	Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot
I/O	Control Output	Open collector, 30 VDC or lower, N.O./N.C. 100 mA or lower for 1 output; 100 mA or lower in total for 2 outputs Residual voltage NPN: 1.4 V or lower (output current: 10 mA or lower)/2 V or lower (output current: 10 to 100 mA), PNP: 1.6 V or lower (output current: 10 mA or lower)/2.2 V or lower (output current: 10 to 100 mA)
	External Input	External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower Input time: 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF only when External Set is selected)
Unit Expansion		—
Protection Circuit		Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection
Number of Interference Prevention Devices		—
Power supply	Power voltage	16 to 30 VDC^*4 (including 10% ripple (P-P) or less), class 2
	Power consumption	During normal operation: 1150 mW (47 mA or lower at 24 V, 64 mA or lower at 16 V), ECO ON/ALL: 985 mW (40 mA or lower at 24 V, 53 mA or lower at 16 V) (excluding Load Current)
Environmental resistance	Ambient temperature	−20 to +55°C -4°F to 131°F (no freezing)^*5
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² (50G); 3 times each for X, Y, and Z axes
Case Material		Main Unit and Cover: Polycarbonate
Accessories		Instruction manual
Weight		Approx. 22 g
^1 Ensure the cable length is 30 m 98.4' or less for the M8 connector type. Ensure the cable length is 20 m 65.6' or less when connecting via IO-Link. ^2 Output 2 and the external input are selectable. ^3 If 500 µs is selected, the following limitations apply. · Only 2-point calibration can be performed. · The detection range masking is set during calibration. (Manual setting of the masking range is not supported.) · Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used. · The interference prevention function is not supported ^4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher. ^*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°F

Keyence LR-TB2000CL Keyence

€416,95

In stock, 17 units

Specifications

Model		LR-TB2000CL
Type		Cable with connector M12
Detectable distance		60 to 2000 mm 2.36" to 78.74"^*1
Spot diameter		Approx. ø4 mm ø0.16"
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1,FDA (CDRH) Part1040.10^*2)
Mutual interference prevention function		4 units (when using the interference prevention function)
Timer		OFF/OFF delay/ON delay/One-shot
Response time		2 ms/20 ms/50 ms/200 ms/2000 ms selectable
I/O	Control output	NPN open collector/PNP open collector selectable 30 VDC or less, 50 mA or less, residual voltage: 2 V or less, N.O./N.C. selectable ^3^4
	Analog output	-
Protection circuit		Protection against reverse power connection, power supply surges, output overcurrent, reverse output connection, and output surge
Power voltage		20 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
Current consumption		45 mA or less (without load)^*5
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp/Sunlight: 10,0000 lux or less
	Ambient temperature	-20 to +55 °C -4 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: Zinc die cast (Nickel chrome plating), Indicator cover and buttons: PES, Lens cover and display: PMMA (scratch-resistant coating specifications), Cable bushing: PBT, Cable: PVC, M12 connector: TPE, PBT, Nickel-plated brass
Accompanying items		Instruction manual
Weight		Approx. 85 g
^1 The range for displayable distance is from 50 to 2200. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 You can select the I/O from the following combinations. Control output × 2, control output + external input Control output + analog output (LR-TB5000/TB5000C/TB5000CL only) External input + analog output (LR-TB5000/TB5000C/TB5000CL only) (For details on the setting method, see the instruction manual.) ^4 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. You can download a setup file from the KEYENCE website (http://www.keyence.com). If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office. ^*5 145 mA or less (with load)

Keyence LB-1101 Keyence

€875,95

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-G35 Keyence

€1.419,95

In stock, 33 units

Specifications

Model		LK-G35
Reference distance		30 mm 1.18"(Diffuse reflection), 23.5 mm 0.93"(Specular reflection)
Measuring range		±5 mm ±0.2"(Diffuse reflection),±4.5 mm ±0.18"(Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW
Spot diameter (at reference distance)		Approx. 30 x 850 µm 0.001181 x 0.0335"
Linearity		±0.05% of F.S. (F.S.= ±5 mm ±0.2")^*1
Repeatability		0.05 µm (0.01 µm)^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±5 mm ±0.2")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 280 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-801 Keyence

€0,00

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-G80 Keyence

€1.687,95

Only 9 units left

Specifications

Model		LK-G80
Reference distance		80 mm 3.15"(Diffuse reflection),75.2 mm 2.96"(Specular reflection)
Measuring range		±15 mm ±0.59"(Diffuse reflection),±14 mm ±0.55"(Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW
Spot diameter (at reference distance)		Approx. ø70 µm ø0.002756"
Linearity		±0.05% of F.S. (F.S.= ±15 mm ±0.59")^*1
Repeatability		0.2 µm 0.000008"^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±15 mm ±0.59")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 380 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G405 Keyence

€2.311,95

In stock, 42 units

Specifications

Model		LK-G405
Reference distance		400 mm 15.75"(Diffuse reflection),398 mm 15.67"(Specular reflection)
Measuring range		±100 mm (diffuse reflection), ±99 mm (specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW maximum
Spot diameter (at reference distance)		Approx. 290 x 8,300 µm
Linearity		±0.05% of F.S. (F.S. = ±100 mm ±3.94")^*1
Repeatability		2 µm 0.000079"^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./˚C (F.S.= ±100 mm ±3.94")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 380 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-H028 Keyence

€2.422,95

Only 6 units left

Sensor Head, Wide Type, Laser Class 3B

Keyence LB-1003 Keyence

€1.844,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LR-XH250 Keyence

€456,95

In stock, 12 units

Specifications

Model		LR-XH250
Type		Cable Length: 2 m 6.6'
Detecting Distance		30 to 250 mm 1.18" to 9.84"
Standard Detectable Deviation		30 to 180 mm: 9 mm, 180 to 250 mm: 18 mm 1.18" to 7.09": 0.35", 7.09" to 9.84": 0.71
Display Resolution		1 to 2 mm 0.04" to 0.08"
Spot Size		Approx. 0.8 mm × 1.2 mm 0.03" × 0.05" (at a detecting distance of 250 mm 9.84")
Light Source	Type	Green laser (505 nm)
	Laser Class	Class 1 laser product (IEC60825-1, FDA (CDRH), Part1040.10^*1)
Environmental resistance	Enclosure rating	IP65/IP67 (IEC60529)
	Ambient light	Incandescent lamp: 8000 lux or less, Sunlight: 8000 lux or less
	Ambient temperature	-10°C to +50°C 14°F to 122°F (no freezing)
	Relative humidity	35 to 85% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power Spectral Density: 0.816 G²/Hz for X, Y and Z axes
	Shock resistance	1000 m/s² (100G); 6 times each for X, Y, and Z axes
Material		Case: SUS316L; Lens Cover: PSU; Gasket: FKM (lens cover), EVM (cable)
Accessories		Laser warning label
Weight		approx. 75 g
^*1 Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice.

Keyence LK-2011 Keyence

€4.983,95

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-2001 Keyence

€278,95

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LK-G150 Keyence

€2.199,95

In stock, 68 units

Specifications

Model		LK-G150
Reference distance		150 mm 5.91" (Diffuse reflection),147.5 mm 5.81" (Specular reflection)
Measuring range		±40 mm ±1.57" (Diffuse reflection), ±39 mm ±1.54" (Specular reflection)
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 3R laser product (JIS C6802)
	Laser Class	Class 3R (IEC 60825-1), Class IIIa (FDA CDRH Part 1040.10)
	Output	4.8 mW maximum
Spot diameter (at reference distance)		Approx. ø120 µm ø0.004724"
Linearity		±0.05% of F.S. (F.S.= ±40 mm ±1.57")^*1
Repeatability		0.5 µm 0.000020"^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.01% of F.S./°C (F.S.= ±40 mm ±1.57")
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 290 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-G08 Keyence

€2.099,95

Only 3 units left

Specifications

Model		LK-G08
Reference distance		8 mm 0.32"
Measuring range		±0.8 mm
Light source	Type	Red semiconductor laser
	Wavelength	655nm (Visible light), Class 1 laser product (JIS C6802)
	Output	0.3 mW
Spot diameter (at reference distance)		Approx. ø20 µm ø0.000787"
Linearity		±0.05% of F.S. (F.S. = ±0.8 mm ±0.03")^*1
Repeatability		0.02 µm (0.01 µm)^*2
Sampling frequency		20/50/100/200/500/1,000 µs (Selectable from 6 levels)
LED display		Near the center of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics		0.02% of F.S./°C (F.S. = ±0.8 mm 0.031")
Environmental resistance	Enclosure rating	-
	Ambient light	Incandescent lamp or Fluorescent lamp: 10,000 lux max.
	Ambient temperature	+10 to +40 °C 50 to 104 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 0.75 mm 0.03", 2 hours in each of the X, Y, and Z directions
Material		Aluminum
Weight		Approx. 245 g (including the cable)
^1 This value was taken when measuring a KEYENCE standard target (ceramic) in standard mode. ^2 These values were taken when measuring a KEYENCE standard target (SUS) at a reference distance and with the number of averaging measurements set to 4,096

Keyence LK-5000P Keyence

€1.642,95

Only 4 units left

Ultra High-Speed/High-Accuracy Laser Displacement Sensor

Keyence LB-1001 Keyence

€723,95

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LR-ZB100N Keyence

€215,95

In stock, 11 units

Specifications

Model		LR-ZB100N
Type		Distance based laser sensor
Appearance		Rectangular
Output		NPN
Cable connection		2 m cable
Detectable distance		35 to 100 mm 1.38" to 3.94" (650 to 0)^*1
Standard detectable deviation		35 to 50 mm 1.38" to 1.97": 1.5 mm 0.06" 50 to 100 mm 1.97" to 3.94": 3 mm 0.12"
Display resolution		2 (0.2 mm 0.008")
Spot size		Approx. 2 × 1 mm 0.08" × 0.04" at 100 mm 3.94"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*2)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	NPN Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
	External input	Input time calibration: 35 ms or more ON, 35 ms or more OFF Laser emission stop: 2 ms or more ON, 20 ms or more OFF Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^3, Diversey^3
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 4,000 lux or less Sunlight: 8,000 lux or less^*4
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 110 g (Including cable)
^1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^3 Have passed resistance tests with cleaning agents from multiple manufactures. ^4 When the response time is 10 ms

Keyence LJ-X8020 Keyence

€7.088,95

Only 2 units left

Specifications

Model			LJ-X8020
Reference distance			20 mm 0.79"
Measurement range	Z-axis (height)		±2.2 mm 0.09" (F.S.=4.4 mm 0.17")
	X-axis (width)	NEAR side	7 mm 0.28"
		Reference distance	7.5 mm 0.30"
		FAR side	8 mm 0.31"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 16 mm × 32 μm 0.63" × 0.0013" (reference distance)
Repeatability	Z-axis (height)		0.3 μm 0.000012" ^3^4
	X-axis (width)		0.3 μm 0.000012" ^3^5
Linearity	Z-axis (height)		±0.05% of F.S. (±0.012%) ^*6
Profile data interval	X-axis (width)		2.5 μm 0.000098" (2 μm 0.000079"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1000 g 2.20 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence LR-ZB250C3P Keyence

€268,95

In stock, 11 units

Specifications

Model		LR-ZB250C3P^*1
Type		Distance based laser sensor
Appearance		Rectangular
Output		PNP
Cable connection		M8 connector, 3-pin
Detectable distance		35 to 250 mm 1.38" to 9.84" (215 to 0)^*2
Standard detectable deviation		35 to 180 mm 1.38" to 7.09": 9 mm 0.35" 180 to 250 mm 7.09" to 9.84": 25 mm 0.98"
Display resolution		1 to 3 (1 to 3 mm 0.04" to 0.12")
Spot size		Approx. 2.4 × 1.2 mm 0.09" × 0.05" at 250 mm 9.84"
Response time		1.5 ms / 10 ms / 50 ms selectable
Light source	Type	Red laser (660 nm)
	Laser class	Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10^*3)
Function	Indicator	3-digit 7-segment display (red), output indicator (yellow), DATUM indicator (orange), 1 spot indicator (green)
	Timer	OFF/ON delay/OFF delay/One-shot
Specifications	Power voltage	10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
	Power consumption	450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)
	Control output	PNP Open collector, Applied voltage 30 VDC or less, Control current 100 mA or less, Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA
	Protection circuit	Protection against reverse power connection, output overcurrent, output surge, reverse output connection
	Output operation	Light-ON / Dark-ON selectable
Environmental resistance	Enclosure rating	IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^4, Diversey^4
	Insulation resistance	20 MΩ or more (500 VDC)
	Ambient light	Incandescent lamp: 2,000 lux or less Sunlight: 4,000 lux or less^*5
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Storage temperature	-25 to +75 °C -13 to 167 °F (No freezing)
	Withstand voltage	1,000 VAC, 50/60 Hz, 1 min
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s², 6 times in each of the X, Y, and Z directions
Material		Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, Packing/Connector ring: FKM
Accompanying items		Instruction Manual, Certification/Identification label (FDA)
Weight		Approx. 55 g
^1 M8 connector (3-pin) type does not include the external input function. ^2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed. ^3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^4 Have passed resistance tests with cleaning agents from multiple manufactures. ^*5 When the response time is 10 ms

Keyence LJ-X8200 Keyence

€6.153,95

Only 2 units left

Specifications

Model			LJ-X8200
Reference distance			245 mm 9.65"
Measurement range	Z-axis (height)		±34 mm 1.34" (F.S.=68 mm 2.68")
	X-axis (width)	NEAR side	64 mm 2.52"
		Reference distance	72 mm 2.83"
		FAR side	80 mm 3.15"
Light source			Blue semiconductor laser
Light source	Wavelength		405 nm (visible light)
	Laser class		Class 2M laser product (IEC60825-1, FDA (CDRH) Part 1040.10 ^1) ^2
	Output		10 mW
Spot size			Approx. 115 mm × 116 μm 4.53" × 0.0046" (reference distance)
Repeatability	Z-axis (height)		1 μm 0.000039" ^3^4
	X-axis (width)		3 μm 0.000118" ^3^5
Linearity	Z-axis (height)		±0.04% of F.S. (±0.006%) ^*6
Profile data interval	X-axis (width)		25 μm 0.0010" (20 μm 0.0008"~) ^*7
Profile data count			3200 points
HDR (high dynamic range)			Single-shot HDR ^*8
Laser irradiation position confirmation function	Light source		Blue LED (405 nm)
Temperature characteristic			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529) ^*9
	Ambient light		Incandescent lamp: 10,000 lux or less ^*10
	Ambient temperature		0 to +45°C 32 to +113°F ^*11
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, double amplitude 1.5 mm 0.06"; 3 hours each for X, Y, and Z axes
	Shock resistance		15 G / 6 msec
Material			Aluminum
Weight			Approx. 1200 g 2.65 lb
^1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice. ^2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes. ^3 Values measured by averaging 4096 times at the reference distance. ^4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values. ^5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values. ^6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data. ^7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change. ^8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high). ^9 The value when a head cable (CB-B) or extension cable (CB-BE) is connected. Does not include CB-BL connection. ^10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper. ^*11 The head needs to be mounted to a metal plate to be used.

Keyence LK-2000 Keyence

€1.122,95

Only 4 units left

Buy the Keyence LK-2000 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence LK-2000 is a direct drop-in replacement for existing installations and ships ready for integration.