Vision Systems

4,599.00 kr

Only 3 units left

Specifications

Model		SJ-U3
Rating	Rating input	100 to 240 VAC (50/60Hz)
	Rated output	24VDC 2.7A
Environmental resistance	Ambient temperature	0 to +35°C 32 to +95°F
	Relative humidity	20 to 80% (no condensation)
Weight		Approx. 260g

Keyence CB-A5E Keyence

3,440.00 kr

Only 1 unit left

Specifications

Model				CB-A5E
Length				5 m 16.40'
Weight				Approx. 400 g

Keyence EV-118USO(2066) Keyence

0.00 kr

Sold Out

Specifications

Model		EV-118USO(2066)^*1
Type		Non-shielded
Shape		M18
Detecting distance		15 mm 0.59" ±10%
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		50 x 50 mm 1.97"
Hysteresis		20% max. of detecting distance, within -10 to +70°C 14 to 158°F
Response frequency		350 Hz
Operation mode		N.O.
Temperature characteristics		±10% max. of detecting distance, within -10 to +70°C 14 to 158°F
Control output (switching capacity)		5 to 200 mA
Protection circuit		Reversed polarity, short-circuit, surge voltage
Cable length		500 mm19.685"
Rating	Power voltage	12 to 24 VDC
	Current consumption (leakage current)	Current consumption (leakage current): 1.0 mA max., Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
	Residual voltage	Residual voltage: 3.6 V max. (with 2-m 6.6' cable)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-25 to +80 °C -13 to 176 °F (No freezing)
	Relative humidity	35 to 95 % RH (No condensation)
Case material		Nickel-plated brass
Weight		Approx. 140 g
^*1 This product does not comply with EMC directive.

Keyence OP-84411 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-84411
Type				I/O connector terminal block
Applicable product				SV, KV-HC3
Cable end				26-pin
Note				Can be used with the MECHATROLINK-II type.

Keyence ER-M18FN Keyence

0.00 kr

Sold Out

Specifications

Model		ER-M18FN
Type		Compact all-metal shielded type Thin type t = 8 mm Cable NPN output
Power supply cable length		2 m 6.6' ^*1
No. of control outputs		1
Output mode		N.O.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less, Max. 50 mA
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 50 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	1010 mW or less (43 mA or less at 24 V, 64 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing)
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	500 m/s² 1640.4 ft/s² (50 G), 10 times in each of the X, Y, and Z directions
Material	Head	SUS316L, PBT Epoxy resin
	Amplifier	Header-to-amplifier cable: TPU, Case: PBT/TPU [Connector] Indicator: LCP, Connector metal: SUS303, Connector: LCP [Cable] Indicator: TPU, Power cable: PVC
	Accessories	―
Accessories
Weight		Approx. 125 g 4.41 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used.

Keyence ER-GL18N03C Keyence

0.00 kr

Sold Out

Specifications

Model		ER-GL18N03C
Type		General-purpose all-metal shielded type Screw type M18 Connector with pigtail (M12 4-pin) NPN output Long-Range
Power supply cable length		0.3 m 1.0' ^*1
No. of control outputs		2
Output mode	Output 1	N.O.
	Output 2	N.C.
Button		None
Button	Function	―
Detecting distance		10 mm 0.39" ±10% ^*2
Response frequency		50 Hz ^3 ^4
Hysteresis distance		15% or less of detecting distance
Detectable object		Magnetic metal, Non-magnetic metal ^*5
Standard detectable object (Iron, t = 1 mm 0.04")		30 × 30 mm 1.18" × 1.18"
Temperature characteristics		±10% or less of detecting distance at +25°C +77°F (-25 to +55°C -13°F to +131°F) ±15% or less of detecting distance at +25°C +77°F (+55 to +70°C 131°F to 158°F)
Control output		Open-collector, 30 VDC or less; 100 mA or less for 1 output; 100 mA or less in total for 2 outputs
Control output	Residual voltage	NPN output: 0.9 V or less (Output current: 10 mA or less) / 1.4 V or less (Output current: 10 to 100 mA) ^*6
Power supply	Power voltage	16 to 30 VDC (including 10% or less ripple (P-P)), Class 2
	Power consumption (excluding load current)	NPN output: 1040 mW or less (44 mA or less at 24 V, 65 mA or less at 16 V)
Protection circuit		Protection against reverse power connections, output short-circuits, and reverse output connections
Environmental resistance	Enclosure rating	IP67 (IEC60529), IP67G (JIS C 0920)
	Ambient temperature	-25 to +70°C -13°F to +158°F (no freezing) ^*7
	Relative humidity	Up to 95% RH (no condensation)
	Vibration resistance	10 to 500 Hz; Power spectral density: 0.816 G²/Hz; X, Y, and Z directions
	Shock resistance	1000 m/s² 3280.8 ft/s² (100 G), 10 times in each of the X, Y, and Z directions
Material		Detecting surface: SUS303, Mounting screw: SUS303 (M30: SUS304), Case resin: PBT, Nut: SUS304, Toothed lock washer: SUS304 [Connector] Indicator: PBT (M8: LCP), Connector: PBT (M8: LCP), Case: SUS303 [Connector with pigtail] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC, Connector resin: TPU, Connector metal: Nickel-plated brass [Cable] Indicator: TPU, Cable cap (M8 only): PBT, Cable: PVC
Accessories		Nut ×2, Toothed lock washer ×1
Weight		Approx. 85 g 3.00 oz
^1 Ensure the power cable is no longer than 30 m 98.4' for connector and connector with pigtail types and no longer than 20 m 65.6' with IO-Link connections. ^2 The distance at which a standard detectable object can be detected when the unit is mounted without being affected by surrounding metal. ^3 Value when a standard detectable object is used, the distance between detectable objects is twice the standard detectable object, and the distance to the detectable object is 1/2 the detecting distance. ^4 The response frequency varies depending on the operating temperature. The response frequency at temperatures of +55°C +131°F or higher is 50% of that at +25°C +77°F. ^5 Detecting distance varies according to the material and size. See the characteristic diagrams for details. ^6 Residual voltage is for when a 2 m 6.6' cable is used. ^*7 The upper limit of the UL temperature rating is +55℃ +131℉.

Keyence CA-00010AB Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence EH-910 Keyence

4,696.00 kr

Only 3 units left

Specifications

Model		EH-910
Type		Solvent resistant , Shielded , Cylindrical
Detectable object		Ferrous metals (see Characteristics for nonferrous metals)
Standard target (iron, t=1 mm 0.04")		10 x 10 mm 0.39" x 0.39"
Stable detecting range		0 to 2 mm0.08"
Maximum detecting distance		4.5 mm0.18"
Hysteresis		0.06 mm0.002"
Repeatability		0.005 mm0.0002"
Temperature characteristics		-10 to +15% max. of detecting distance at 23°C (73.4°F), within 0 to +60°C (32 to 140°F)
Environmental resistance	Enclosure rating	IP67
	Ambient temperature	-10 to +60 °C 14 to 140 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
Weight		Approx. 53 g (including nuts and 3-m 9.8' cable)

Keyence GL-VM60HP Keyence

11,010.00 kr

Only 4 units left

Specifications

Model			GL-VM60HP
Beam axis spacing/Lens diameter			20 mm 0.79": ø5 ø0.197"
Number of beam axes			60
Total length			1200 mm 47.24"
Detection height			1180 mm 46.46"
Protection height			1225 mm 48.23"
Minimum detectable object size			ø25 mm ø0.98" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	6.3
		OFF→ON	50.2 ^*3
		All blocked→ON	59.0 ^*4
	With channel A or B	ON→OFF	19.1
		OFF→ON	70.2 ^*3
		All blocked→ON	97.0 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	134 ^*5
		Receiver	146 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	58 ^*5
		Receiver	63 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		780 g 27.53 oz
	Receiver		790 g 27.88 oz
	Total		1570 g 55.42 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence GL-VM28LP Keyence

0.00 kr

Sold Out

Specifications

Model			GL-VM28LP
Beam axis spacing/Lens diameter			40 mm 1.57": ø5 ø0.197"
Number of beam axes			28
Total length			1120 mm 44.09"
Detection height			1080 mm 42.52"
Protection height			1165 mm 45.87"
Minimum detectable object size			ø45 mm ø1.77" ^*1
Detecting distance			0.3 to 15 m 1.0' to 49.2' ^*2
Effective angular aperture			Up to ±2.5° (3 m 9.8' or above)
Light source			Infrared LED (850 nm) Exempt Group (IEC62471)
Detection mode			ON when all beam axes received
Synchronization method			Optical synchronization
Interference prevention function			Interference prevention up to 2 units by series connection and switch setting
Control output (OSSD output)	Output type		Transistor output ×2 (PNP/NPN)
	Maximum load current		150 mA or less
	Residual voltage (when ON)		Up to 2.5 V (with 5 m 16.4' cable)
	OFF voltage		Up to 2.0 V (with 5 m 16.4' cable)
	Leakage current		Up to 0.8 mA
	Maximum load capacity		0.8 μF
	Load wiring resistance		Up to 2.5Ω
Protection circuit			Power supply reverse connection protection, short circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC/EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15B Class A, ICES-003 Class A
	Safety		IEC61496-1/EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2/EN61496-2, UL61496-2 (Type 4 AOPD) EN ISO13849-1 (Category 4, PL e) IEC61508/EN61508 (SIL3) UL60947-1 / CSA C22.2 No. 60947-1 UL1998
Response time (OSSD)	With channel 0	ON→OFF	5.0
		OFF→ON	48.6 ^*3
		All blocked→ON	55.4 ^*4
	With channel A or B	ON→OFF	13.7
		OFF→ON	60.8 ^*3
		All blocked→ON	79.6 ^*4
Inputs			Short circuit current: Approx. 3 mA
Power supply	Power voltage		24 VDC -20/+25% 10% ripple (P-P) or less, class 2
	Current consumption (at maximum) (mA) Indicator : Standard / Eco/ External control	Transmitter	123 ^*5
		Receiver	136 ^*5
	Current consumption (at maximum) (mA) Indicator : OFF	Transmitter	53 ^*5
		Receiver	59 ^*5
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Ambient light		Incandescent lamp: 3000 lux or less, sunlight: 20,000 lux or less
	Operating ambient temperature		-30 to +55°C -22 to +131°F (no freezing) ^*6
	Operating relative humidity		Up to 95%RH (no condensation)
	Storage temperature		-30 to +70°C -22 to +158°F (no freezing)
	Storage relative humidity		Up to 95% RH
	Overvoltage category		ll
	Vibration resistance		5 to 150 Hz 1G 10 cycles each in X, Y, and Z axes
	Shock resistance		15 G 6 ms pulses 100 times each in X, Y, and Z axes
Material	Main unit case		Aluminum alloy
	Upper case/lower case		PPS (GF40%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		730 g 25.76 oz
	Receiver		740 g 26.12 oz
	Total		1470 g 51.89 oz
^1 The maximum operating speed of the detected object is 2.0 m 6.6'/s. ^2 When the optional front protection cover is attached to either the transmitter or receiver, the detecting distance is shortened by 0.5 m 1.6'. When attached to both, it is shortened by 1 m 3.3'. ^3 If light blocking time is 80 ms or less, the response time (OFF>ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD remains OFF for 80 ms or more. ^4 “All blocked > ON” is the time it takes for the transmitter and receiver to turn ON from an unsynchronized state (both upper and lower end beam axes are blocked). Since the reception or blockage of light is determined after the transmitter and receiver are synchronized, the response time is long. ^5 The current of control output (OSSD) is not included. ^6 When the ambient operating temperature is between 50 and 55°C 122°F and 131°F, set the indicator mode to Light OFF mode.

Keyence CA-DRR9 Keyence

4,779.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DRM5DA Keyence

0.00 kr

Sold Out

Specifications

Model		CA-DRM5DA
Type		50 mm 1.97" type
Environmental resistance	Relative humidity	65%RH or less (No condensation)

Keyence OP-87280 Keyence

4,747.00 kr

Only 3 units left

Specifications

Model				OP-87280
Overview				Adapter converting G3/4 male connection aperture to R3/8 male of GP-M Series.
Applicable product				GP-M Series sensor main unit
Number included				1 pcs.
Connection port				G3/4 female and R3/8 male on respective side
Material				SUSXM7

Keyence CA-CM20 Keyence

16,409.00 kr

Only 3 units left

Buy the Keyence CA-CM20 - a genuine Keyence industrial automation component engineered for reliable performance in demanding manufacturing and process control environments. The Keyence CA-CM20 is a direct drop-in replacement for existing installations and ships ready for integration.

Keyence FD-R80 Keyence

35,150.00 kr

Only 5 units left

Specifications

Model		FD-R80
Supported pipe diameter		2 1/2" (65 A), ø64 to ø83 2.52" to 3.27" 3" (80 A), ø83 to ø100 3.27" to 3.94"
Supported pipe materials		Metal / resin^*1
Supported fluids		Various liquids (i.e. water, oils, chemicals)^*1
Supported fluid temperature		- 20 to + 120°C - 4.0 to + 248 °F (no freezing on the pipe surface)^*2
Maximum rated flow		Rated flow velocity range: 5.0 m/s Flow rate range (Typical): 2 1/2" (65 A): 1000 L/min 260 gal/min 60 m³/ h) 3" (80 A): 1500 L/min 390 gal/min 90 m³ / h
Zero cut flow rate		Zero cut: 0.3 m/s (default)^*3 Flow rate (Typical): 90 L / min 24 gal / min 5.4 m³/h
Display method		Dual row, 5-digit display with white, 14-segment LED; Large status indicator; Output indicators; Stability indicator; Unit indicator
Display update cycle		Approx. 3 Hz
Display resolution		1 (L / min)
Response time		0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s (variable)
Measurement accuracy		Between 20 and 100% of F.S. : ±2.0% of RD^4^5 Between 6 and 20% of F.S. : ±0.4% of F.S. ^4^5
Protection circuit		Power supply reverse connection protection, Power supply surge protection, Short-circuit protection for each output, Surge protection for each output
Zero point error		±0.5% of F.S.^4^6
Hysteresis		Variable
Flow units		L / min, m³ / h, gal / min
Integrated flow unit display		1 / 10 / 100 / 1000 / 10000 (L)
Pipe temperature measurement accuracy		±3°C ±5.4°F (liquid temperature of - 20 to + 50°C, - 4 to + 122°F) ±5°C ±9°F (liquid temperature of 50 to + 120°C, 122 to 248°F) (ambient operating temperature of 25°C 77°F)^*4
Wiring specifications	Power supply	DC power supply: M12 4-pin connector / AC power supply: M4 screw terminal block (selectable)
	I/O	When using a DC power supply: M12 4-pin connector / when using an AC power supply: M3 screw terminal block
Input/Output (Selectable)	Output (ch.1/ch.2)	Control output / Integrated pulse output / Error output / Temperature alarm, NPN / PNP setting switchable,open collector output 30 VDC or less, max. 100 mA / ch., residual voltage: 2.5 V or less^*7
	Analog output (ch.1/ch.2)	Flow rate analog output / Temperature analog output and 4 - 20 mA / 0 - 20 mA (selectable), load resistance: 500 Ω or less^*7
	External input (ch.2)	Integrated flow reset input / Flow rate zero input / Origin adjustment input (selectable), short-circuit current: 1.5 mA or less, input time: 20 ms or more^*7
Rating	Power voltage	20 to 30 VDC including 10% ripple (P-P), Class 2 / 100 to 240 VAC - 15% or + 10% (50 / 60 Hz)
	Current consumption	When using a DC power supply: 200 mA or less (load current excluded), 400 mA or less (load current included) When using an AC power supply: 15 VA or less
Environmental resistance	Enclosure rating	IP65 / 67 (IEC60259), IP69K (ISO20653), Enclosure Type 4X (NEMA250)
	Ambient temperature	- 20 to + 60°C - 4.0 to 140 °F (no freezing)^*2
	Relative humidity	5 to 90%RH (no condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm 0.06", XYZ axes 2 hours for each axis
	Shock resistance	100 m/s² , 16 ms pulse, XYZ axes, 1000 times for each axis
Dimensions		Main unit size: 218.5 mm × 66.9 mm × 70.7 mm 8.60" × 2.63" × 2.78"
Material	Main unit	Body: aluminum die-casting + coating / PPS, display: reinforced glass, connectors: SUS304-equivalent
	Unit rear	Rubber
	Upper/lower bracket	SUS304
Weight		Main unit: Approx. 1.0 kg Upper/lower bracket: Approx.2.0 kg (including sub unit)
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable due to the type and status of the pipes. ^2 Perform derating depending on the ambient temperature and liquid temperature when using an AC power supply. ^3 The zero cut flow rate can be changed in the settings. ^4 This value is guaranteed by KEYENCE inspection facilities. Errors will be introduced by the type and status of the pipes, the type and temperature of the fluid, and the zero cut flow rate. ^5 This is the value when considering linearity + span error + repeatability in a stable environment of 25°C 77°F. ^6 It is possible to enhance the precision of zero point error by performing an origin adjustment. ^*7 IO-Link: Compatible with Specification v1.1 / COM2 (38.4 kbps) The setting file can be downloaded from the KEYENCE website. If using the unit in an environment where downloading the file is not accessible via Internet, contact your nearest KEYENCE office. IO-Link is either registered trademarks or trademarks of PROFIBUS Nutzerorganisation e.V. (PNO)

Keyence PJ-S12 Keyence

4,089.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence OP-51459 Keyence

0.00 kr

Sold Out

Specifications

Model				OP-51459
Overview				Front protective cover protecting detection side of light curtain.
Applicable product				SL-V55F, SL-V28H, SL-V14L, SL-C28H, SL-C14L
Number included				1 pcs.
Length				550.3 mm 21.67"
Material				Translucent plastic: Polycarbonate (t=Approx. 1.10mm), Black plastic: ABS
Note				To install this product on both the transmitter and receiver, 2 sets are required. Use the dimming filters (sold separately) by attaching them to the front protection cover. When the front protection cover is attached, the L-shaped mounting bracket (OP-42

Keyence N-410 Keyence

7,137.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence LS-9030M Keyence

0.00 kr

Sold Out

Specifications

Model		LS-9030M^*1
Type		Head: Standard model
Measurement range		0.3 mm (0.08 mm) to 30 mm 0.01" (0.003") to 1.18"
Smallest detectable object		0.3 mm (0.08 mm) 0.01" (0.003")
Transmitter/receiver distance		160 ±40 mm 6.3" ±1.57"
Repeatability		±0.1 µm 0.000004"^*2
Measurement accuracy		±2 µm 0.000079"^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	20 x 24 mm 0.79" x 0.94"
	Smallest detectable object	0.3 mm 0.01"
	Repeatability	±0.2 mm 0.01"^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 440 g Receiver: Approx. 500 g Base: Approx. 430 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø10 mm ø0.39" rod in the center of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø10 mm ø0.39" rod is measured in the 10 mm x 20 mm 0.39" x 0.79" measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø10 mm ø0.39" rod in the center of the measurement area with the average measurement number set as 512 times.

Keyence PX-H61G Keyence

9,138.00 kr

Only 3 units left

Specifications

Model		PX-H61G^*1
Type		M12 Reflective Armored
Light source LED		Red 4-element LED (Wavelength：635 nm)
Detecting distance	TURBO	400 mm 15.7"
	SUPER	600 mm 23.6"
	ULTRA	1200 mm 47.2"
	MEGA	2000 mm 78.7"
Detectable object		―
Spot diameter		Approx. 15 x 15 mm 0.59" at 100 mm 3.94" Approx. 65 x 65 mm 2.56" at 500 mm 19.69"
Environmental resistance	Enclosure rating	IEC: IP68/JEM: IP68g/NEMA: 4X, 6P, 13/DIN: IP69K
	Ambient light	Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.
	Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Case material		Housing ：SUS303 (Plastic parts：PMP, POM) Lens ：BK7
Accessories		Screw nut x 2, toothed washer x 1
Weight		Approx. 220 g^*2 (Including cable)
^1 Contact KEYENCE for cable length variations of spiral types. ^2 The PX-H71G, H72G and H61G have SUS304 spiral protective tube on the cables.

Keyence CV-X352F Keyence

34,531.00 kr

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DXB5 Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DXB5
Type				Coaxial Light (On-Axis)
LED color				Blue
Power consumption				4.9 W
Input voltage				12 VDC
Weight				Approx. 230 g

Keyence EX-V01E Keyence

11,456.00 kr

Only 1 unit left

Specifications

Model		EX-V01E
Type		Controller
Shape		ø5.4 x 18 mm ø0.21" x 0.71" Cylindrical
Measuring range		0 to 1 mm 0.04"
Display range		-19,999 to +19,999
Linearity		±0.3% of F.S.
Resolution (No. of averaging measurements: 64)		0.4 µm 0.016 Mil
Sampling rate		40,000 samplings max./sec. ^*1
Display speed		20 times/sec. (2-color, 7-segment LED)
Display power		7-segment 2-color LED
Over-range alarm		±FFFF is displayed.
Control input	Timing input	NPN open-collector or non-voltage contact signal
	Reset input
	Auto-zero input
	Judgment output: Inhibit input
	Synchronization/external settings input
Control output	Setting method	Upper/lower 2-level setting x 4 patterns (selectable)
	Signal	NPN open-collector (HIGH, GO and LOW): 100 mA max. (40 V max.)
	Response time	0.075 ms (at maximum speed)
	OFF-delay time	60 ms (ON/OFF selectable)
Strobe output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.O.)
Alarm output		NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. (N.C.)
Analog output voltage	Output voltage	±5V
	Impedance	100 Ω
	Response time	0.075 ms (at maximum speed)
Temperature characteristics		0.07% of F.S./°C ^*2
Major functions		FLL, digital filter, auto zero, offset, calculation, measurement mode (15 types), judgment value memory (4 sets), decimal point shift, display digit changing, display of various errors, etc.
Rating	Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	240 mA or less
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Weight		Approx. 235 g
^1 When the digital filter function is used, the sampling rate is 20,000 sampling/sec. ^2 When the distance between the sensor head and the target is within 50% of the measuring range.

Keyence PG-610 Keyence

10,094.00 kr

Only 7 units left

Specifications

Model		PG-610
Type		Amplifier
Detecting area		21 x 21 mm 0.83" x 0.83"
Minimum detectable object		0.5 mm 0.02" dia. min. opaque materials
Light source		Infrared LED
Sensitivity adjustment		1-turn trimmer
Indicator lamp		Output: Red LED, Stable operation: Green LED
Output	Control output	NPN: 100 mA max. (40 V max.) Residual voltage: 1 V max.^*1
	Self-diagnostic output	NPN: 100 mA max. (40 V max.) Residual voltage: 1 V max.^*2
	Response time	0.2 ms^*2
Off-delay time		0.5 / 70 ms (selectable)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	40 mA or less
Environmental resistance	Ambient light	Fluorescent lamp: 10,000 lux max., Sunlight: 1,500 lux max.
	Ambient temperature	-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Polycarbonate
Weight		Amplifier (including 3-m 9.8' cable): Approx. 100 g
^1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. One-shot output (ON when target passes through sensor) ^2 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter.