keyence

6,847.00 kr

Only 5 units left

Specifications

Model		DL-RB1A^*1
Indicator		Alarm indicator lamp (red), Power indicator lamp (green)
Sensor connection specifications	Number of connectable sensor units	Up to 15 units (including main unit)
BCD output specifications	I/O terminal	34-pin connector (MIL standard)
	Control output	BCD output: 4 outputs (1 digit) x 6 digits, signed output, strobe output, alarm output, NPN open-collector output: 40 V, 20 mA or less, residual voltage: 1 V or less, positive logic/negative logic (switchable)
	Control input	ID selection input: 4 inputs, data request input, no-voltage input (with contacts, without contacts); input time: 2 ms or more; short-circuit current: 1 mA
Power voltage		20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier)
Power consumption		27 mA max.
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case/Polycarbonate
Weight		Approx. 46 g
^*1 For connecting with sensor, please refer to the user's Manual

Keyence DL-RS1 Keyence

5,621.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DL-RS1A Keyence

2,934.00 kr

In stock, 11 units

Specifications

Model		DL-RS1A^*1
Synchronization between the transmitter and receiver		Asynchronous
Transmission code		ASCII
Baud rate		2,400/4,800/9,600/19,200/38,400 bps selectable (Factory-setting: 9,600 bps)
Data bit length		8 bits/7 bits selectable (Factory-setting: 8 bits)
Parity check		None/Even/Odd selectable (Factory-setting: None)
Stop bit length		1 bit
Data delimiter		Data reception: automatically recognizes CR or CR+LF Data transmission: Fixed to CR+LF
Indicator		Communication indicator lamp (green x 2), Alarm indicator lamp (red), Power indicator lamp (green)
Sensor connection specifications	Number of connectable sensor units	Up to 15 units (including main unit)
Power voltage		20 to 30 VDC, including ripple, Ripple (P-P): 10 % max. Class 2 (Supplied via connected sensor amplifier)
Power consumption		25 mA max.
Environmental resistance	Ambient temperature	-10 to +55 °C 14 to 131 °F
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Case/Polycarbonate
Weight		Approx. 53 g
Communication method		Full duplex
^*1 For connecting with sensor, please refer to the user's Manual

Keyence DP-6 Keyence

2,853.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DT-100 Keyence

30,382.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DT-100A Keyence

16,462.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DT-500 Keyence

14,478.00 kr

Only 1 unit left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DV-90 Keyence

20,683.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DV-90N Keyence

17,746.00 kr

Only 6 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DV-90NE Keyence

9,313.00 kr

Only 7 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DV-90PE Keyence

7,988.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DX-A400 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-A400
Controller	CPU	ARM® Penta Core
	OS	Android™14
Main Memory	RAM/ROM	4 GB RAM, 64 GB ROM
Display	LCD	4.0-inch, 480 × 800
	Operation Status LED	3-color LED
Operations	Hard Keys	Trigger key × 2, Volume up/down keys, Power key, Front Fn key × 3
	Touch Panel	Electrostatic capacitance method (Tempered glass)
Scanner	Reading Light Source	High-intensity white LED
	Pointer Light Source	Visible semiconductor laser (655 nm), Output: 390 μW, Class 1 laser product (JIS C 6802) (IEC 60825-1)
	Minimum Resolution	2D code: 0.169 mm 0.0067", Barcode: 0.076 mm 0.0030"
	Field Range	186 × 114 mm 7.32" × 4.49" (Reading distance: 200 mm 7.87")
	Supported Codes	UPC/EAN/JAN (add-on code support), CODE128, GS1-128, CODE39, Codabar (NW-7), CODE93, ITF, COOP 2of5, Industrial 2of5, QR code, Micro QR, DataMatrix (ECC200), PDF417, GS1 DataBar, Composite Code, Postal
Communication	Wireless LAN	IEEE 802.11 a/b/g/n/ac 2.4 GHz (b,g,n: 1 to 11 ch) 5.2 GHz, 5.3 GHz (a/n/ac)
	Bluetooth	Bluetooth Ver. 5.1 BR/EDR/LE
	WWAN	4G LTE/3G, SIM unlocked, Nano SIM slot × 1
	GNSS	GPS, A-GPS, GLONASS, Beidou
	NFC	ISO 14443 Type A, B, FeliCa, ISO 15693
	Supported Media	microSD/SDHC/SDXC UHS-I
Power Source	Main Battery	Dedicated lithium-ion battery pack
	Backup Battery	Built-in lithium secondary battery: Approx. 1 month^*1
Other	Microphone	2 (noise-canceling)
	Speaker	Speaker × 1, Receiver × 1
	Vibration	Available
	Camera	Rear Camera: 8 MP-AF, Front Camera: 5 MP
	Sensor	Accelerometer, Gyroscope, Digital compass, Ambient light, Proximity, Temperature and humidity, Barometric pressure
Environmental resistance	Ambient temperature	-20 to +50°C -4 to +122°F, Charging: 0 to +40°C 32 to 104°F^*2
	Relative humidity	20 to 85% RH (No condensation)
	Storage temperature	-20 to +60°C -4 to +140°F (No freezing)
	Storage relative humidity	20 to 85% RH (No condensation)
Dimensions		143.5 × 73.7 × 31.8 mm 5.65" × 2.90" × 1.25"
Weight		Approx. 165 g 5.82 oz
^1 This indicates the case when the main battery is not attached or the battery has no charge. ^2 Due to the added load in sub-zero environments, the continuous usage time may be reduced significantly. Be sure to test the device before use in these environments.

Keyence DX-A600 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-A600
Controller	CPU	ARM® Penta Core
	OS	Android™14
Main Memory	RAM/ROM	4 GB RAM, 64 GB ROM
Display	LCD	6.0-inch, 720 × 1440
	Operation Status LED	3-color LED
Operations	Hard Keys	Trigger key × 2, Volume up/down keys, Power key, Side Fn key × 2
	Touch Panel	Electrostatic capacitance method (Tempered glass)
Scanner	Reading Light Source	High-intensity white LED
	Pointer Light Source	Visible semiconductor laser (655 nm), Output: 390 μW, Class 1 laser product (JIS C 6802) (IEC 60825-1)
	Minimum Resolution	2D code: 0.169 mm 0.0067", Barcode: 0.076 mm 0.0030"
	Field Range	186 × 114 mm 7.32" × 4.49" (Reading distance: 200 mm 7.87")
	Supported Codes	UPC/EAN/JAN (add-on code support), CODE128, GS1-128, CODE39, Codabar (NW-7), CODE93, ITF, COOP 2of5, Industrial 2of5, QR code, Micro QR, DataMatrix (ECC200), PDF417, GS1 DataBar, Composite Code, Postal
Communication	Wireless LAN	IEEE 802.11 a/b/g/n/ac 2.4 GHz (b,g,n: 1 to 11 ch) 5.2 GHz, 5.3 GHz (a/n/ac)
	Bluetooth	Bluetooth Ver. 5.1 BR/EDR/LE
	WWAN	4G LTE/3G, SIM unlocked, Nano SIM slot × 1
	GNSS	GPS, A-GPS, GLONASS, Beidou
	NFC	ISO 14443 Type A, B, FeliCa, ISO 15693
	Supported Media	microSD/SDHC/SDXC UHS-I
Power Source	Main Battery	Dedicated lithium-ion battery pack
	Backup Battery	Built-in lithium secondary battery: Approx. 1 month^*1
Other	Microphone	2 (noise-canceling)
	Speaker	Speaker × 1, Receiver × 1
	Vibration	Available
	Camera	Rear Camera: 8 MP-AF, Front Camera: 5 MP
	Sensor	Accelerometer, Gyroscope, Digital compass, Ambient light, Proximity, Temperature and humidity, Barometric pressure
Environmental resistance	Ambient temperature	-20 to +50°C -4 to +122°F, Charging: 0 to +40°C 32 to 104°F^*2
	Relative humidity	20 to 85% RH (No condensation)
	Storage temperature	-20 to +60°C -4 to +140°F (No freezing)
	Storage relative humidity	20 to 85% RH (No condensation)
Dimensions		175.5 × 85.9 × 31.5 mm 6.91" × 3.38" × 1.24"
Weight		Approx. 220 g 7.77 oz
^1 This indicates the case when the main battery is not attached or the battery has no charge. ^2 Due to the added load in sub-zero environments, the continuous usage time may be reduced significantly. Be sure to test the device before use in these environments.

Keyence DX-BC6 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BC6^*1
Display	Charging Confirmation LED	—
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	6270 mAh
	Charging Time	Approx. 7 hours
Interfaces	Magnet Connector	—
	USB
	Non-contact Charging
Dimensions		78.7 × 40.6 × 22.4 mm 3.10" × 1.60" × 0.88"
Weight		Approx. 115 g 4.06 oz
Accessory		—
^*1 The DX-BC6 can be used only with the expansion unit installed. The interface and charging status LEDs for the DX-BC6 are included on the side of the attached expansion unit.

Keyence DX-BQ3 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BQ3^*1
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	3030 mAh
	Charging Time	Approx. 5 hours (non-contact charging) Approx. 4 hours (USB)
Interfaces	Magnet Connector	—
	USB	Supported (Charging and Communication) * Used with USB Micro B, USB 2.0 OTG^*2, or OP-88603 (USB Micro B cable)
	Non-contact Charging	Supported (Charging only) * Used with Qi 1.1-compliant charger
Dimensions		117.6 × 66.1 × 15.5 mm 4.63" × 2.60" × 0.61"
Weight		Approx. 105 g 3.71 oz
Accessory		—
^1 The DX-BS3x/BQ3 are not supported for the DX-W600. ^2 An OTG conversion cable is required for use in USB Host mode.

Keyence DX-BQ6 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BQ6
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	6060 mAh
	Charging Time	Approx. 7.5 hours (non-contact charging) Approx. 6 hours (USB)
Interfaces	Magnet Connector	—
	USB	Supported (Charging and Communication) * Used with USB Micro B, USB 2.0 OTG^*1, or OP-88603 (USB Micro B cable)
	Non-contact Charging	Supported (Charging only) * Used with Qi 1.1-compliant charger
Dimensions		117.6 × 66.1 × 22 mm 4.63" × 2.60" × 0.89"
Weight		Approx. 155 g 5.47 oz
Accessory		—
^*1 An OTG conversion cable is required for use in USB Host mode.

Keyence DX-BS3 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BS3^*1
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	3030 mAh
	Charging Time	Approx. 4 hours
Interfaces	Magnet Connector	Supported (Charging and Communication) * Used with DX-UC4, DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (Magnetic charging cable)
	USB	—
	Non-contact Charging
Dimensions		117.6 × 66.1 × 17.3 mm 4.63" × 2.60" × 0.68"
Weight		Approx. 100 g 3.53 oz
Accessory		—
^*1 The DX-BS3x/BQ3 are not supported for the DX-W600.

Keyence DX-BS3H Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BS3H^*1
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	3030 mAh
	Charging Time	Approx. 4 hours
Interfaces	Magnet Connector	Supported (Charging and Communication) * Used with DX-UC4, DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (Magnetic charging cable)
	USB	—
	Non-contact Charging
Dimensions		117.6 × 66.1 × 22.5 mm 4.63" × 2.60" × 0.89"
Weight		Approx. 100 g 3.53 oz
Accessory		Hand strap
^*1 The DX-BS3x/BQ3 are not supported for the DX-W600.

Keyence DX-BS6 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-BS6
Display	Charging Confirmation LED	2-color LED
Power Source	Type	Dedicated lithium-ion battery pack
	Capacity	6060 mAh
	Charging Time	Approx. 7 hours
Interfaces	Magnet Connector	Supported (Charging and Communication) * Used with DX-UC4, DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (Magnetic charging cable)
	USB	—
	Non-contact Charging
Dimensions		122.3 × 66.1 × 27.2 mm 4.81" × 2.60" × 1.07"
Weight		Approx. 155 g 5.47 oz
Accessory		Hand strap

Keyence DX-GN1 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-GN1
Display	Charging Confirmation LED	2-color LED
Operations	Hard Keys	Trigger key × 1
Power Source	Type	Dedicated lithium ion battery pack (DX-BC6)
	Capacity	6270 mAh
Interfaces	Magnet Connector	Supported (charging/communication) * Connected to DX-UC4 (with the DX-KE1), DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (magnetic charging cable)
Dimensions		182.1 × 66.1 × 106.6 mm 7.17" × 2.60" × 4.20"
Weight		Approx. 175 g 6.18 oz

Keyence DX-KE1 Keyence

0.00 kr

Sold Out

Specifications

Model		DX-KE1
Display	Charging Confirmation LED	2-color LED
Operations	Hard Keys	Front keys × 24
Power Source	Type	Dedicated lithium ion battery pack (built in)
	Capacity	6060 mAh
Interfaces	Magnet Connector	Supported (charging/communication) * Connected to DX-UC4 (with the DX-KE1), DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (magnetic charging cable)
Dimensions		174.1 × 66.1 × 33.5 mm 6.85" × 2.60" × 1.32"
Weight		Approx. 205 g 7.24 oz^*1
^*1 The DX-KE1 weight includes the built-in battery.

Keyence DX-OCR1 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence DX-RH1GA Keyence

0.00 kr

Sold Out

Specifications

Model		DX-RH1GA
Display	Charging Confirmation LED	2-color LED
Operations	Hard Keys	Trigger key × 1
RFID	Supported Tags	ISO/IEC 18000-6 Type C (EPC Global Class 1 Gen 2)
	Frequency Range	902.75 - 927.25 MHz
	Transmission Output	1 W or less
Power Source	Type	Dedicated lithium ion battery pack (DX-BC6)
	Capacity	6270 mAh
Interfaces	Magnet Connector	Supported (charging/communication) * Connected to DX-UC4 (with the DX-KE1), DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (magnetic charging cable)
Dimensions		182.1 × 100 × 152.4 mm 7.17" × 3.94" × 6.00"
Weight		Approx. 405 g 14.30 oz

Keyence DX-RM1GA Keyence

0.00 kr

Sold Out

Specifications

Model		DX-RM1GA
Display	Charging Confirmation LED	2-color LED
Operations	Hard Keys	Front keys × 27
RFID	Supported Tags	ISO/IEC 18000-6 Type C (EPC Global Class 1 Gen 2)
	Frequency Range	902.75 - 927.25 MHz
	Transmission Output	500 mW or less
Power Source	Type	Dedicated lithium ion battery pack (DX-BC6)
	Capacity	6270 mAh
Interfaces	Magnet Connector	Supported (charging/communication) * Connected to DX-UC4 (with the DX-KE1), DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604 (magnetic charging cable)
Dimensions		222.4 × 70.6 × 50 mm 8.76" × 2.78" × 1.97"
Weight		Approx. 205 g 7.24 oz