keyence

2,640.00 kr

Only 6 units left

Specifications

Model				CA-LH25
Focal point				25 mm 0.98"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.04 % (-0.02 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 89 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH25G Keyence

4,475.00 kr

Only 2 units left

Specifications

Model		CA-LH25G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		25 mm 0.98"
F-stop range (aperture)		F1.4/4/8/16^*1
Minimum WD		0.2 m 0.7'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.04 % (-0.02 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 73 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH25P Keyence

8,024.00 kr

Only 1 unit left

Specifications

Model				CA-LH25P
Focal point				25 mm 0.98"
F-stop range (aperture)				F1.4/4/8/16^*1
Minimum WD				0.2 m 0.7'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.04％ (-0.02％)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 75 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LH35 Keyence

2,640.00 kr

Only 5 units left

Specifications

Model				CA-LH35
Focal point				35 mm 1.38"
F-stop range (aperture)				F2.0 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.2 % (-0.05 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 69 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH35G Keyence

0.00 kr

Sold Out

Specifications

Model		CA-LH35G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		35 mm 1.38"
F-stop range (aperture)		F2.0/4/8/16^*1
Minimum WD		0.2 m 0.7'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.2 % (-0.05 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 62 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH35P Keyence

5,608.00 kr

Only 2 units left

Specifications

Model				CA-LH35P
Focal point				35 mm 1.38"
F-stop range (aperture)				F2.0/4/8/16^*1
Minimum WD				0.2 m 0.7'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.2％ (-0.05％)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 65 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LH4 Keyence

6,651.00 kr

Only 6 units left

Specifications

Model				CA-LH4
Focal point				4.4 mm 0.17"
F-stop range (aperture)				F1.6 to F16
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				43.0 mm 1.69" P0.75
Compatible image sensor size				1/1.8"
TV distortion				-0.2 % (-0.13 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 150 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH50 Keyence

2,570.00 kr

Only 5 units left

Specifications

Model				CA-LH50
Focal point				50 mm 1.97"
F-stop range (aperture)				F2.8 to F22
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.03 % (-0.01 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 92 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH50G Keyence

8,987.00 kr

Only 3 units left

Specifications

Model		CA-LH50G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		50 mm 1.97"
F-stop range (aperture)		F2.8/4/8/16^*1
Minimum WD		0.2 m 0.7'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.03 % (-0.01 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 76 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH50P Keyence

11,006.00 kr

Only 3 units left

Specifications

Model				CA-LH50P
Focal point				50 mm 1.97"
F-stop range (aperture)				F2.8/4/8/16^*1
Minimum WD				0.2 m 0.7'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.03％ (-0.01％)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 85 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LH5P Keyence

27,536.00 kr

Only 1 unit left

Specifications

Model				CA-LH5P
Focal point				5 mm 0.20"
F-stop range (aperture)				F2.8/4/8/16^*1
Minimum WD				0.1 m 0.3'
Filter size				40.5 mm 1.59" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.5% (-0.1%)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 75 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LH75 Keyence

7,953.00 kr

Only 3 units left

Specifications

Model				CA-LH75
Focal point				75 mm 2.95"
F-stop range (aperture)				F2.5 to F22
Minimum WD				1.2 m 3.9'
Mount				C-mount
Filter size				34.0 mm 1.34" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.1 % (-0.05 %)^*1
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 105 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH8 Keyence

2,225.00 kr

Only 1 unit left

Specifications

Model				CA-LH8^*1
Focal point				8 mm 0.31"
F-stop range (aperture)				F1.4 to F16
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				27.0 mm 1.06" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.6 % (-0.28 %)^*2
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 90 g
^1 To use CA-LH8 for CV-020/CV-070/CV-035C/M/CV-H035C/M, close-up rings with 1.5 mm 0.06" or more thickness are required. ^2 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.

Keyence CA-LH8G Keyence

21,564.00 kr

Only 3 units left

Specifications

Model		CA-LH8G
Type		Vibration-resistant models
Compatible image sensor size		2/3"
Focal point		8 mm 0.315"
F-stop range (aperture)		F1.4/4/8/16^*1
Minimum WD		0.1 m 0.3'^*2
Resolving power		100 cycles/mm (center), 80 cycles/mm (periphery)
Filter size		27.0 mm 1.06" P0.5
TV distortion		-0.6 % (-0.28 %)^*3
Mount		C-mount
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 78 g
^1 The vibration-resistant types are designed to have their apertures replaced. When shipped, the OPEN aperture is attached to the lens, so replace this with one of the other included apertures (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 Installing the lens at a distance from the target shorter than the minimum working distance listed in the specifications makes it very likely that the lens will drop out due to vibrations. If the lens is installed in such a position, implement separate countermeasures to prevent the lens from dropping out. ^*3 This indicates the specification for the compatible image sensor size. The value in parentheses applies to a 1/3" image sensor size.

Keyence CA-LH8P Keyence

13,568.00 kr

Only 3 units left

Specifications

Model				CA-LH8P
Focal point				8 mm 0.31"
F-stop range (aperture)				F1.4/4/8/16^*1
Minimum WD				0.1 m 0.3'
Filter size				27.0 mm 1.06" P0.5
Mount				C-mount
Max. compatible image sensor size				2/3"
Resolving power				100 cycles/mm at center, 80 cycles/mm on periphery
TV distortion				-0.6% (-0.28%)^*2
Enclosure rating				IP64 (objective lens, water repellent coating specifications)^*3
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Weight				Approx. 85 g
^1 The f-stop (aperture) is changed by replacing the diaphragm plate. When this product is shipped, the OPEN diaphragm plate is attached to the lens, so replace it with one of the other included diaphragm plates (F4, F8, or F16) as necessary. To use the f-stop (aperture) in the OPEN mode, use the lens without removing the OPEN aperture. ^2 This indicates the value with the maximum supported image size. The value in parentheses applies to a 1/3" image sensor size. ^*3 When connected to a KEYENCE environmentally resistant camera (excluding when the close-up ring and filter are attached)

Keyence CA-LHE12 Keyence

15,953.00 kr

Only 6 units left

Specifications

Model				CA-LHE12
Focal point				12 mm 0.47"
F-stop range (aperture)				F2.0 to F22
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				55 mm 2.17" P0.75
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				0.59 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 270 g

Keyence CA-LHE16 Keyence

13,682.00 kr

Only 7 units left

Specifications

Model				CA-LHE16
Focal point				16 mm 0.63"
F-stop range (aperture)				F2.0 to F22
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				40.5 mm 1.59" P0.5
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				0.02 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 250 g

Keyence CA-LHE25 Keyence

5,188.00 kr

Only 7 units left

Specifications

Model				CA-LHE25
Focal point				25 mm 0.98"
F-stop range (aperture)				F2.0 to F16
Minimum WD				0.15 m 0.5'
Mount				C-mount
Filter size				40.5 mm 1.59" P0.5
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				-0.57 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 260 g

Keyence CA-LHE35 Keyence

4,493.00 kr

In stock, 12 units

Specifications

Model				CA-LHE35
Focal point				35 mm 1.38"
F-stop range (aperture)				F2.0 to F16
Minimum WD				0.2 m 0.7'
Mount				C-mount
Filter size				37.5 mm 1.48" P0.5
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				-0.17 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 210 g

Keyence CA-LHE50 Keyence

10,823.00 kr

Only 7 units left

Specifications

Model				CA-LHE50
Focal point				50 mm 1.97"
F-stop range (aperture)				F2.0 to F22
Minimum WD				0.3 m 1.0'
Mount				C-mount
Filter size				37.5 mm 1.48" P0.5
Compatible image sensor size				ø23 mm ø0.91"(full-size C-mount)
TV distortion				0.80 %
Resolving power				160 cycles/mm at center, 80 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE BAND MULTI COATING
Weight				Approx. 220 g

Keyence CA-LHL16 Keyence

13,823.00 kr

Only 1 unit left

Specifications

Model		CA-LHL16
Focal point		16 mm 0.62"
F-stop		F2.8 to F32 ^*1
Minimum WD		0.1 m 0.33'
Resolving power		100 cycles/mm at center, 80 cycles/mm on periphery
Compatible image sensor size		2"
TV distortion		-0.20 %^*2
Filter size		77 mm 3.03" P0.75
Mount		Special mount (M40 P0.75)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 420 g
^1 When used with a line camera, an aperture of around F 2.8 is recommended. This improves the peripheral resolving power. ^2 Indicates specification for compatible image sensors size. Value in parenthesis applies to 2/3" or 1/2" image sensor size.

Keyence CA-LHL25 Keyence

23,239.00 kr

Only 6 units left

Specifications

Model		CA-LHL25
Focal point		25 mm 0.98"
F-stop		F2.8 to F32 ^*1
Minimum WD		0.1 m 0.33'
Resolving power		100 cycles/mm at center, 80 cycles/mm on periphery
Compatible image sensor size		2"
TV distortion		-0.06 %^*2
Filter size		52 mm 2.05" P0.75
Mount		Special mount (M40 P0.75)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 420 g
^1 When used with a line camera, an aperture of around F 2.8 is recommended. This improves the peripheral resolving power. ^2 Indicates specification for compatible image sensors size. Value in parenthesis applies to 2/3" or 1/2" image sensor size.

Keyence CA-LHL35 Keyence

0.00 kr

Sold Out

Specifications

Model		CA-LHL35
Focal point		35 mm 1.38"
F-stop		F2.8 to F32 ^*1
Minimum WD		0.1 m 0.33'
Resolving power		100 cycles/mm at center, 80 cycles/mm on periphery
Compatible image sensor size		2"
TV distortion		-0.05 %^*2
Filter size		46 mm 1.81" P0.75
Mount		Special mount (M40 P0.75)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 80 % RH (No condensation)
Weight		Approx. 330 g
^1 When used with a line camera, an aperture of around F 2.8 is recommended. This improves the peripheral resolving power. ^2 Indicates specification for compatible image sensors size. Value in parenthesis applies to 2/3" or 1/2" image sensor size.

Keyence CA-LHR12 Keyence

9,871.00 kr

Only 5 units left

Specifications

Model				CA-LHR12
Focal point				12 mm 0.47"
F-stop range (aperture)				F1.8 to F11
Minimum WD				0.1 m 0.3'
Mount				C-mount
Filter size				25.5 mm 1.00" P0.5
Compatible image sensor size				2/3"
TV distortion				-0.12 % (0.01 %)^*1
Resolving power				200 cycles/mm at center, 140 cycles/mm on periphery
Ambient temperature/humidity range				0 to +50°C 32 to 122°F, 80% RH or less (No condensation)
Lens coating				WIDE, BAND MULTICOATING
Weight				Approx. 105 g
^*1 Indicates specification for compatible image sensor size. Value in parenthesis applies to 1/3" image sensor size.