keyence

4,399.00 kr

Only 5 units left

Specifications

Model				CA-DBR5
Type				Bar Light
LED color				Red
Diffusion plate				OP-42283
Polarizing plate				OP-42281
Power consumption				1.7 W
Input voltage				12 VDC
Weight				Approx. 35 g

Keyence CA-DBR50H Keyence

0.00 kr

Sold Out

Specifications

Model				CA-DBR50H^*1
Type				High-Intensity, Large Bar Lights
LED color				Red
Power consumption				19.8 W × 2 ch^*2
Input voltage				12 VDC
Weight				Approx1490 g
^1 When using the CA-DBRxxH in the DC mode of the CA-DC21E, even if you set the volume to zero, the light will not turn off. To turn off the light by setting the volume to zero, use PWM mode. A diffusion plate is included with the CA-DBxxxH. The thickness of the diffusion plate is approximately 2 mm 0.08". ^2 Connect these models to both channels.

Keyence CA-DBR8 Keyence

12,422.00 kr

Only 1 unit left

Specifications

Model				CA-DBR8
Type				Bar Light
LED color				Red
Diffusion plate				OP-87042
Polarizing plate				OP-87043
Power consumption				3.6 W
Input voltage				12 VDC
Weight				Approx. 60 g

Keyence CA-DBRS Keyence

3,252.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DBW12W Keyence

10,567.00 kr

Only 9 units left

Specifications

Model				CA-DBW12W
Type				Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxW. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				13.8 W
Input voltage				12 VDC
Polarizing diffusion plate				OP-87975^*1
Weight				Approx. 195 g
^*1 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence CA-DBW13 Keyence

4,038.00 kr

Only 9 units left

Specifications

Model				CA-DBW13
Type				Bar Light
LED color				White
Diffusion plate				OP-42282
Polarizing plate				OP-42280
Power consumption				7.3 W
Input voltage				12 VDC
Weight				Approx. 90 g

Keyence CA-DBW15P Keyence

9,561.00 kr

Only 1 unit left

Specifications

Model		CA-DBW15P
Shape		Bar type
LED color		White
Power consumption		13.2 W
Enclosure rating		IP67^*1
Environmental resistance	Ambient temperature	0 to 40°C 32°F to 113°F
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 260 g
^*1 A KEYENCE-specified environmentally resistant illumination cable must be used with the product.

Keyence CA-DBW24W Keyence

13,471.00 kr

Only 8 units left

Specifications

Model				CA-DBW24W
Type				Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxW. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				27.6 W
Input voltage				12 VDC
Polarizing diffusion plate				OP-87976^*1
Weight				Approx. 345 g
^*1 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence CA-DBW24WEO Keyence

11,705.00 kr

Only 4 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DBW34H Keyence

21,594.00 kr

Only 3 units left

Specifications

Model				CA-DBW34H
Type				High-Intensity, Large Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				18.4 W × 2 ch^1^2
Input voltage				12 VDC
Polarizing diffusion plate				OP-87977^*3
Weight				Approx. 1,050 g
^1 Connect these models to both channels. ^2 A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08". ^*3 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence CA-DBW5 Keyence

2,460.00 kr

Only 9 units left

Specifications

Model				CA-DBW5
Type				Bar Light
LED color				White
Diffusion plate				OP-42283
Polarizing plate				OP-42281
Power consumption				2.9 W
Input voltage				12 VDC
Weight				Approx. 40 g

Keyence CA-DBW50H Keyence

36,287.00 kr

Only 4 units left

Specifications

Model				CA-DBW50H
Type				High-Intensity, Large Bar Light
LED color				White
Diffusion plate				A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08".
Power consumption				19.8 W × 2 ch^1^2
Input voltage				12 VDC
Polarizing diffusion plate				OP-87978^*3
Weight				Approx. 1,490 g
^1 Connect these models to both channels. ^2 A diffusion plate is included with the CA-DBWxxH. The thickness of the diffusion plate is approximately 2 mm 0.08". ^*3 The included diffusion plate and polarizing diffusion plate cannot be used with the product at the same time. There may be air bubbles or foreign substances on the surface of the polarizing diffusion plate, but these have no effect on the image quality. Even if such substances are present, the product is still within the inspection standards, and these substances do not indicate that the product is defective.

Keyence CA-DBW8 Keyence

10,540.00 kr

Only 7 units left

Specifications

Model				CA-DBW8
Type				Bar Light
LED color				White
Diffusion plate				OP-87042
Polarizing plate				OP-87043
Power consumption				4.8 W
Input voltage				12 VDC
Weight				Approx. 60 g

Keyence CA-DC100 Keyence

6,448.00 kr

Only 9 units left

Specifications

Model		CA-DC100
Input		2 external control inputs (EXT) (non-voltage contact input)
Output	Light control method	Light-emitting frequency: 100 kHz, pulse width modulation method
	Connection points	2 channels
	Voltage	12 V
	Capacity	30 W max. (20 W per channel)
Input voltage		24 VDC ±10%
Rating	Current consumption	1.8 A (under maximum load)
Environmental resistance	Ambient temperature	0 to +45 °C 32 to 113 °F^*1
	Relative humidity	35 to 85 % RH (No condensation)^*2
Weight		Approx 220 g
^1 Environment for illumination unit: Ambient temperature of 0 to +40 °C 32 to 104 °F and relative humidity of 35 to 65 % (no condensation). ^2 Environment for illumination unit: Ambient temperature of 0 to +40 °C 32 to 104 °F and relative humidity of 35 to 65 % RH (No condensation).

Keyence CA-DC10E Keyence

11,917.00 kr

Only 3 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DC20E Keyence

8,357.00 kr

Only 9 units left

Specifications

Model		CA-DC20E
Type		Light control expansion unit
Output	Light control method	(1) Constant voltage control method (direct current lighting) (2) Pulse width modulation method (light emitting frequency: 100 kHz) [the controller can be used to switch the setting]
	Intensity range	255-level digital [the controller can be used to switch the setting]
	Connection points	2 CH (LED connector connections and terminal block connections can be made)
	Voltage	12 VDC, 24 VDC [DIP switches can be used to switch the setting]
	Capacity	Max. 40 W (30 W/1 ch maximum)
	Synchronization	FLASH output synchronization, continuous lighting [the controller can be used to switch the setting]
	Response speed	(1) Constant voltage control: less than 10 ms during 12 V output, less than 20 ms during 24 V output (2) Pulse width modulation control: less than 1 ms during 12 or 24 V output
Display	LED display	Lighting knob display: green, orange (128 or higher); error display: red (all lit)
Input voltage		24 VDC ±10%
Rating	Current consumption	3.0 A (12 V output at maximum load)6.5 A (24 V output at maximum load)
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F
	Relative humidity	35 to 85 % RH (No condensation)^*1
Weight		Approx 590 g
^*1 Environment for illumination unit: Ambient temperature of 0 to +40 °C 32 to 104 °F and relative humidity of 35 to 65 % RH (No condensation).

Keyence CA-DC21E Keyence

1,833.00 kr

In stock, 12 units

Specifications

Model		CA-DC21E^*1
Type		Illumination Controllers Only for XG/CV-5000/CV-X200/CV-X100 Series
Input		Forced light stop: Input rating max. 26.4 V, min. 2 mA
Output	Light control method	(1) Constant voltage control method (direct current light) (2) Pulse width modulation method (light emitting frequency: 100 kHz) [Program setting]
	Intensity range	255 level digital [Program setting]
	Connection points	2 ch (Supports LED connector and terminal block connections)
	Voltage	12 VDC/24 VDC [DIP switch setting]
	Capacity	Max. 40 W (30 W per channel)
	Synchronization	FLASH output synchronization/continuous lighting [Program setting]
	Response speed	(1) Constant voltage control: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation control: Max. 1 ms at 12/24 V output
Display	LED display	Power indication, light volume indication
Rating	Power voltage	24 VDC ±10 %
	Current consumption	3.0 A (12 V output at maximum load) 6.5 A (24 V output at maximum load)^*2
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F^3^4
	Relative humidity	85%RH or less (No condensation)^*5
Weight		Approx. 590 g
^1 Integrated lighting controller only for direct connection to a Keyence vision controller (CV-5000, CV-X and XG Series). Contact KEYENCE for more details. ^2 Out of which the current consumption of controller is 1.6 A. ^3 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 35 to 65 % RH ambient humidity (no condensation). ^4 Limited by the ambient temperature of connected controllers. ^*5 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 65%RH or less ambient humidity (No condensation).

Keyence CA-DC30E Keyence

6,448.00 kr

Only 7 units left

Specifications

Model		CA-DC30E
Type		Illumination Controller Only for XG/CV-X200/CV-X100 Series Compatible with CA-DRWxX lights only
Input		-
Output	Light control method	Constant current control method
	Intensity range	255 level digital [Program setting]
	Connection points	2 ch (dedicated 6-pole circular connector)
	Voltage	LumiTrax^TM light dedicated power supply
	Capacity	Max. 81 W
	Synchronization	Camera trigger/shutter speed synchronization
	Response speed	Under 1 ms
Display	LED display	Power indication, light status indication (2 ch individually)
Rating	Power voltage	24 VDC ±10 %
	Current consumption	5 A (at maximum load)^*1
Environmental resistance	Ambient temperature	0 to +50 °C 32 to 122 °F^2^3
	Relative humidity	85%RH or less (No condensation)^*4
Weight		Approx. 430 g
^1 Out of which the current consumption of controller is 1.6 A. ^2 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 35 to 65 % RH ambient humidity (no condensation). ^3 Limited by the ambient temperature of connected controllers. ^4 Environmental resistance of the light emitting part is 0 to +40 °C 32 to 104 °F ambient temperature and 65%RH or less ambient humidity (No condensation).

Keyence CA-DC40E Keyence

4,765.00 kr

In stock, 14 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DC50E Keyence

16,622.00 kr

Only 9 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence CA-DC60E Keyence

7,070.00 kr

In stock, 20 units

Specifications

Model		CA-DC60E
Type		Lighting power supply
Output	Light control method	Constant current control mode
	Intensity range	1,024-step digital gradation (switchable settings using controller)
	Connection points	2ch (Dedicated 12-pole connector)
	Synchronization	Camera trigger and shutter synchronization^*1
	Response speed	1 ms or less
Display	LED display	Power / Lighting status (2ch each)
Rating	Power voltage	24 VDC +25%, -20%
	Current consumption	5.7A (at 19.2VDC)/4.6A (at 24VDC) ^*2
Environmental resistance	Ambient temperature	0 to 45°C 32 to 113°F (DIN rail-mounted) / 0 to 40°C 32 to 104°F (bottom-mounted) ^*3
	Relative humidity	85%RH or less (No condensation) ^*3
Weight		Approx. 500 g
^1 Continuous lighting (single-color lighting in all directions) can only be set when the brightness value control is set to ON. ^2 Including the current supplied to the light-emitting unit. ^*3 Environmental resistance for lights includes an operating ambient temperature of 0 to 40°C 32 to 104°F and an operating ambient humidity of 65%RH or less (with no condensation).