1 year warranty
This current transformer, tropicalised for cable, has a line rated current of 200 A and a secondary current rating of 5 A. This current transformer allow a maximum cable outer diameter of 21 mm. Burden and accuracy class as follows: class 0.5 maximum power: 4 VA, class 1 maximum power: 5.5 VA, class 3 maximum power: 6 VA.
Main
| Characteristic | Value(s) |
|---|---|
| Range | PowerLogic |
| product name | CT |
| Product or component type | Current transformer |
| Secondary current | 5 A |
| Accuracy class | Class 0.5 at 4 VA Class 3 at 6 VA Class 1 at 5.5 VA |
| [In] rated current | 200 A |
Complementary
| Characteristic | Value(s) |
|---|---|
| Current transformer type | Tropicalised for cable |
| Current transformer ratio | 200/5 |
| [Ith] conventional free air thermal current | 12 kA |
| Dynamic withstand current | 2.5 Ith |
| Maximum safety factor | 5 |
| [Ue] rated operational voltage | < 720 V AC 50/60 Hz |
| [Ui] rated insulation voltage | 3 kV |
| Mounting mode | Clip-on By screws |
| Mounting support | DIN rail Mounting plate |
| Width | Outside: 44 mm |
| Height | Outside: 65 mm |
| Depth | Frame : 30 mm Total : 37 mm |
| Diameter | 21 mm |
| Product weight | 0.175 kg |
| [Uimp] rated impulse withstand voltage | 3 kV |
| Electrical insulation class | Class B |
| Cable outer diameter | 21 mm |
| Sealing | With |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Lexium 28 |
| Device short name | LXM28E |
| Product or Component Type | Motion servo drive |
| Format of the drive | Compact housing |
| Line current | 1.2 A 239.2 % 220 V, single phase 1.2 A 212.7 % 220 V, three phase |
Complementary
| Characteristic | Value(s) |
|---|---|
| Phase | Single phase Three phase |
| [Us] rated supply voltage | 200...240 V - 10...15 %)three phase 200...240 V - 20...15 %)single phase |
| Supply voltage limits | 200â¦255 V three phase 170â¦255 V single phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network Frequency | 47.5...63 Hz |
| EMC filter | Without EMC filter |
| Continuous output current | 0.9 A 16 kHz |
| Output current 3s peak | 2.7 A 220 V |
| Continuous power | 100 W 220 V |
| Nominal power | 0.1 kW 220 V 16 kHz |
| Switching frequency | 16 kHz |
| Overvoltage category | III |
| Maximum leakage current | 1.3 mA |
| Output voltage | <= power supply voltage |
| Electrical isolation | Between power and control |
| Type of cable | Shielded motor cable 32â¦131 °F (0â¦55 °C)) copper |
| Electrical connection | Spring terminal 0.82...1 mm², AWG 18 L1-L2) Spring terminal 0.82...1 mm², AWG 18 R, S, T) Spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) Spring terminal 0.82...1 mm², AWG 18 PA/+, PBe) |
| Discrete input number | 8 programmable CN1) 2 fast capture CN1) 1 safety function STO CN9) |
| Discrete input voltage | 24 V DC logic |
| Discrete input logic | Positive or negative CN1) |
| Discrete output number | 5 logic output CN1)12...24 V DC 1 pulse train output (PTO) CN1) |
| Discrete output voltage | 12...24 V DC |
| Discrete output logic | Positive or negative CN1) |
| Control signal type | Servo motor encoder feedback CN2 |
| Protection type | Against reverse polarity inputs signal Against short-circuits outputs signal Overcurrent motor Overvoltage motor Undervoltage motor Overheating motor Overload motor Overspeed motor |
| Safety function | STO (safe torque off), Integrated |
| Safety level | SIL 2 IEC 61800-5-2 2007 SIL 2 IEC 61508-1 2010 PL d/category 3 ISO 13849-1 2008 SIL 2 ISO 13849-1 2009/AC SIL 2 IEC 60204-1 2006 SIL 2 IEC 60204-1 2009/A1 SIL 2 IEC 60204-1 2010/AC SIL 2 IEC 62061 2012 |
| Communication interface | EtherCAT, Integrated |
| Connector type | RJ45 CN4)EtherCAT |
| Method of access | Slave |
| Transmission rate | 100 Mbit/s EtherCAT |
| Physical interface | RS485 Modbus Serial line slave |
| Status LED | 1 LED (Red) DC bus energized 1 LED (multi-colour) N.RUN 1 LED (multi-colour) N.ERR 2 LEDs (Yellow) Link (Link Status) 2 LEDs (Yellow) activity |
| Signalling function | Servo status and fault codes five 7-segment display units |
| Marking | CE CSA CULus |
| type of cooling | Natural convection |
| Operating position | Vertical |
| Product compatibility | Servo motor BCH2 1.6 in (40 mm), 2 100 W |
| Width | 2.2 in (55 mm) |
| Height | 5.9 in (150 mm) |
| Depth | 5.7 in (146 mm) |
| Product Weight | 2.2 lb(US) (1 kg) |
| Supply voltage description | Single phase 220 V AC 50...60 Hz Three phase 220 V AC 50...60 Hz |
| Network number of phases | 3 1 |
| Drive voltage drop coefficient | 1 |
| Field weakening | False |
| Continuous output current 2 | 0.9 A |
| Output current 3s peak 2 | 2.7 A 220 V |
| Switching frequency 2 | 16 kHz |
| Continuous output current 3 | 0.9 A |
| Output current 3s peak 3 | 2.7 A 220 V |
| Switching frequency 3 | 16 kHz |
| communication interface | EtherCAT Pulse train output |
| Emc filter compatibility | Type 020 Type 022 |
