1 year warranty
auxiliary contact, Acti9, iOF+SD 24, 1NO + 1NC, DC
auxiliary contact, Acti9, iOF+SD 24, 1NO + 1NC, DC
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
auxiliary contact, Acti9, iOF, 1 OC, AC/DC
auxiliary contact, Acti9, iSD, 1OC, AC/DC
auxiliary contact, Acti9, iOF/SD+OF, 2OC, AC/DC
This Acti 9 MX+OF electrical tripping auxiliary for is a shunt trip release. It is dedicated to Acti9 iC60, iID, iDPN Vigi, iSW-NA. This device includes an open/close contact OF to indicated the position of the associated device. Emergency stoppage by normally open pushbutton. The product trips the associated device when it is powered on by emergency pushbutton. The width in 9mm pitches is 2. The Ue rated operational voltage is 100VAC to 415VAC or 110VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator light, red on the front face. It can be mounted on a DIN rail for modular installation. The product color is white (RAL9003). The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Shunt trip release with OC contact |
| Device short name | iMX+OF |
| Signal contacts composition | 1 C/O |
| [In] rated current | AC-12 3 A at 415 V, AC 50 Hz AC-12 6 A at 100 V, AC 50 Hz AC-12 6 A at 230 V, AC 50 Hz DC-12 1 A at 110 V, DC DC-12 1 A at 130 V, DC |
| [Uc] control circuit voltage | 100...415 V AC 50/60 Hz 110...130 V DC |
| 9 mm pitches | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Acti9 iC60H RCBO Acti9 iC60H RCBO PoN Acti9 iC60H2 RCBO Acti9 iC60N RCBO Acti9 iKQE RCBO |
| Local signalling | Action indicator |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top: YES |
| Width | 18 mm |
| Colour | White |
| Connections - terminals | Clamp terminal - 2 cable(s) 2.5 mm² - flexible with cable end Clamp terminal - 1 cable(s) 6 mm² - rigid Clamp terminal - 2 cable(s) 2.5 mm² - rigid Clamp terminal - 1 cable(s) 4 mm² - flexible |
| Tightening torque | 1 N.m |
| Compatibility code | IMX+OF |
This Acti9 iMX+OF electrical tripping auxiliary for is a shunt trip release device with open/close auxiliary contact. It is dedicated to Acti9 iC60, iID, iDPN Vigi, iSW-NA. This device includes an open/close contact OF to indicated the position of the associated device. The width in 9mm pitches is 2. The Uc control circuit voltage is 48VAC or 48VDC. It can be mounted on a DIN rail for modular installation. The product color is white (RAL9003). The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Shunt trip release with OC contact |
| Device short name | iMX+OF |
| Signal contacts composition | 1 C/O |
| [In] rated current | AC-12 2 A at 48 V, AC 50 Hz DC-12 2 A at 48 V, DC |
| [Uc] control circuit voltage | 48 V AC 50/60 Hz 48 V DC |
| 9 mm pitches | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Acti9 iC60H RCBO Acti9 iC60H RCBO PoN Acti9 iC60H2 RCBO Acti9 iC60N RCBO Acti9 iKQE RCBO |
| Local signalling | Action indicator |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top: YES |
| Width | 18 mm |
| Colour | White |
| Connections - terminals | Clamp terminal - 1 cable(s) 5 mm² - rigid Clamp terminal - 2 cable(s) 2.4 mm² - rigid Clamp terminal - 1 cable(s) 3 mm² - flexible Clamp terminal - 2 cable(s) 2.4 mm² - flexible with cable end |
| Tightening torque | 1 N.m |
| Compatibility code | IMX+OF |
shunt trip release with OC contact, Acti9, iMX+OF, voltage release, 12...24 VAC
This Acti 9 iMN electrical auxiliary is an instantaneous undervoltage release. It is dedicated to Acti9 iC60, iID, iDPN Vigi, iSW-NA. It prevents device closing again until its input voltage has been restored. Emergency stoppage by normally open pushbutton. It ensures the safety of power supply circuits for several machines by preventing uncontrolled restarting. The width in 9mm pitches is 2. It trips the device with which it is combined when its input voltage decreases (between 70% and 35% of Un). The Uc control circuit voltage is 220â¦240VAC. The Ue rated operational voltage is 200VAC to 240VAC. The operating frequency is 50Hz or 60Hz. It can be mounted on a DIN rail for modular installation. The product color is white (RAL9003). The operating temperature is -35°C to + 70°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Undervoltage release |
| Device short name | iMN |
| [Uc] control circuit voltage | 220...240 V AC 50/60 Hz |
| control type | Standard |
| 9 mm pitches | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Acti9 iC60H RCBO Acti9 iC60H RCBO PoN Acti9 iC60H2 RCBO Acti9 iC60N RCBO Acti9 iKQE RCBO |
| Local signalling | Action indicator |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top and bottom: YES |
| Width | 18 mm |
| Colour | White |
| Connections - terminals | Clamp terminal - 1 cable(s) 8 mm² - rigid Clamp terminal - 2 cable(s) 2.7 mm² - rigid Clamp terminal - 1 cable(s) 6 mm² - flexible Clamp terminal - 2 cable(s) 2.7 mm² - flexible with cable end |
| Tightening torque | 1 N.m |
| Compatibility code | IMN |
This Acti9 iMN electrical auxiliary is an instantaneous undervoltage release. It is dedicated to Acti9 iC60, iID, iDPN Vigi, iSW-NA. It prevents device closing again until its input voltage has been restored. The width in 9mm pitches is 2. The Uc control circuit voltage is 220â¦240VAC. It can be mounted on a DIN rail for modular installation. The product color is white (RAL9003). The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standards.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| Product or component type | Undervoltage release |
| Device short name | iMNs |
| [Uc] control circuit voltage | 220...240 V AC 50/60 Hz |
| control type | Delayed |
| 9 mm pitches | 2 |
Complementary
| Characteristic | Value(s) |
|---|---|
| Range compatibility | Acti9 iC60H RCBO Acti9 iC60H RCBO PoN Acti9 iC60H2 RCBO Acti9 iC60N RCBO Acti9 iKQE RCBO |
| Local signalling | Action indicator |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top and bottom: YES |
| Width | 18 mm |
| Colour | White |
| Connections - terminals | Clamp terminal - 1 cable(s) 10 mm² - rigid Clamp terminal - 2 cable(s) 2.9 mm² - rigid Clamp terminal - 1 cable(s) 8 mm² - flexible Clamp terminal - 2 cable(s) 2.9 mm² - flexible with cable end |
| Tightening torque | 1 N.m |
| Compatibility code | IMNs |
undervoltage release, Acti9, iMNx, voltage release, 220...240 V AC
undervoltage release, Acti9, iMNx, voltage release, 380...415 V AC
This Acti9 accessory is a plug in base for modular products. This accessory is compatible the Acti9 products like Acti9 iC60, Acti9 iID, Acti9 iSW and Acti9 iSW-NA. It is dedicated for 1 pole. The dimensions are (W) 19mm x (H) 177mm x (D) 70mm.
Main
| Characteristic | Value(s) |
|---|---|
| Product or component type | Plug-in base |
| Device short name | plug-in base |
| Accessory / separate part category | Installation accessory |
| Colour | White |
Complementary
| Characteristic | Value(s) |
|---|---|
| Poles description | 1P |
| Mounting mode | Clip-on |
| Quantity per set | 1 |
| Height | 177 mm |
| Width | 19 mm |
| Depth | 70 mm |
This Acti 9 rotary handle for front or side-mounted control is black. This mounting accessory is suitable for iC60 (2P, 3P, 4P), iSW (2P, 3P, 4P), iC60+vigi (2P, 3P, 4P), iID, iSW-NA. The rotary handle is fixed on the front or the side of the enclosure. It prevents the door from opening when the device is in On position but it can desactivated by adaptation. It is a set of 1 device. The front-mounted is possible on door or faceplate. It can be padlocked when the device is in the Open position or Closed position with adaptation. A pushbutton for iID test is available in the front face of the rotary handle. The degree of protection is IP55. The 5mm to 8mm diameter padlock is not supplied with the device. The dimensions of the front face of the rotary handle are (W) 75mm x (H) 75mm. The operating temperature is -25°C to + 55°C.
Main
| Characteristic | Value(s) |
|---|---|
| Range of product | IID ISW 40...125 ISW-NA IC60 |
| Product or component type | Rotary handle |
| Accessory / separate part type | Control accessories |
| Handle colour | Black |
| Rotary handle mounting style | Extended |
Complementary
| Characteristic | Value(s) |
|---|---|
| Mounting mode | Drawout Fixed |
| Rotary handle padlocking | Lockable in O position 3 padlocks max Padlock in OFF position |
| Rotary handle mounting location | Front Lateral |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
This Acti9 iCT+ is a low votage silent modular contactor. It is a 1P remote control device with 1 normally open contact. The rated current is 20A for AC-7a and 20A for AC-7b. The Ue rated operational voltage is 250VAC. The Uc control voltage is 230VAC. It is especially accurate for LED lighting control thanks to its crossing technology. This device could be used for remote switching lighting loads, small motors (fans, mixers) or HVAC system applications. This product is compliant with EN/IEC 60669-2-2. Electrical endurance goes up to 5000000 cycles. The maximum switching operations is 6 per minute. The Ui rated insulation voltage is 300VAC. Pollution degree is 3. It is DIN rail mountable. Its width is 2 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 81mm x (H) 18mm x (D) 60mm. The weight is 70g. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 55°C. The storage temperature is from -40°C to 60°C.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 iCT+ |
| Product or component type | Contactor |
| Device short name | iCT+ |
| Device application | Control circuit |
| Poles | 1P |
| [Ie] rated operational current | 20 A AC-7A 20 A AC-7B |
| Pole contact composition | 1 NO |
| Network type | AC |
| control type | Remote control |
| [Uc] control circuit voltage | 230 V AC 50 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Network frequency | 50 Hz |
| [Ue] rated operational voltage | 250 V AC 50 Hz |
| Maximum power | 3.6 kW at 250 V AC |
| [Ui] rated insulation voltage | 300 V |
| Control signal type | Maintained |
| Switching frequency | 6 switching operation/minute |
| Local signalling | Color indicator |
| Hold-in power consumption in VA | 1.1 VA |
| Inrush power in VA | 11 VA |
| Mounting mode | Clip-on |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 2 |
| Height | 81 mm |
| Width | 18 mm |
| Depth | 60 mm |
| Product weight | 70 g |
| Colour | White |
| Mechanical durability | 5000000 cycles |
| Electrical durability | 5000000 cycles |
| Connections - terminals | Tunnel type terminal2 cable(s) 1.5 mm² rigid Tunnel type terminal2 cable(s) 1.5 mm² flexible with ferrule Tunnel type terminal2 cable(s) 2.5 mm² rigid Tunnel type terminal2 cable(s) 2.5 mm² flexible Tunnel type terminal1 cable(s) 4 mm² rigid Tunnel type terminal1 cable(s) 4 mm² flexible |
| Tightening torque | 1 N.m |
| Wire stripping length | 10 mm |
| Product compatibility | No auxiliary |
| Compatibility code | ICT+ |
| Market segment | Residential Small commercial |
iCT plus HC 20A 1P Uc 230VAC
This Acti9 iTL+ is a silent modular impulse relay. This 1P+N device has 1 normally open contact. The rated current is 16A, 230VAC operating voltage and it operates with 230VAC control voltage. Electrical endurance goes up to 5000000 cycles for AC-21 or 5000000 cycles for AC-22. The switching frequency is 6 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. The iTL+ high-performance impulse relay allows remote control of single-phase circuits. It is designed for demanding applications. It is mainly used for lighting control applications. It is DIN rail mountable. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The product weight is 70g. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -5°C to 55°C. The storage temperature is from -40°C to 60°C. This product is compliant with IEC/EN 60669-2-2 standard.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 iTL+ |
| Product or component type | Impulse relay |
| Device short name | iTL+ |
| Device application | Standard |
| Poles | 1P + N |
| Neutral position | Left |
| Pole contact composition | 1 NO |
| [In] rated current | 16 A |
| Network type | AC |
| [Uc] control circuit voltage | 230 V AC 50 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Network frequency | 50 Hz |
| [Ue] rated operational voltage | 230 V AC 50 Hz |
| control type | Remote and manual control |
| Control signal type | Impulse |
| Switching frequency | 6 switching operation/minute |
| Impulse duration | 50 ms...1 s |
| Remote control type | Illuminated push-button 5 mA |
| Local signalling | ON/OFF indication |
| Hold-in power consumption in VA | 1.1 VA |
| Inrush power in VA | 11 VA |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| 9 mm pitches | 2 |
| Height | 84 mm |
| Width | 18 mm |
| Depth | 60 mm |
| Product weight | 70 g |
| Electrical durability | AC-21: 5000000 cycles AC-22: 5000000 cycles |
| Connections - terminals | Tunnel type terminals top or bottom 2 cable(s) 1.5 mm² rigid Tunnel type terminals top or bottom 2 cable(s) 1.5 mm² flexible with ferrule Tunnel type terminals top or bottom 2 cable(s) 2.5 mm² rigid Tunnel type terminals top or bottom 2 cable(s) 2.5 mm² flexible without cable end Tunnel type terminals top or bottom 1 cable(s) 4 mm² rigid Tunnel type terminals top or bottom 1 cable(s) 4 mm² flexible without cable end |
| Wire stripping length | 10 mm |
| Tightening torque | 1 N.m |
| Product compatibility | No auxiliary |
This Acti9 CT40 is a modular contactor. It is a 2P remote control device with 2 normally open contact. The rated current is 25A for AC-7a and 8.5A for AC-7b. The Ue rated operational voltage is 250VAC. The Uc control voltage is 230VAC. This device could be used for control circuits. This product is compliant with EN/IEC 61095 standard. The maximum switching operations is 100 per day and 6 per minute. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 2.5kV. Pollution degree is 2. It is DIN rail mountable. Its width is 2 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 87mm x (H) 18mm x (D) 66mm. The weight is 110g. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 60 °C. The storage temperature is from -40°C to 60°C.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 CT40 |
| Product or component type | Contactor |
| Device short name | CT40 |
| Device application | Control circuit |
| Poles | 2P |
| [Ie] rated operational current | 25 A AC-7A 8.5 A AC-7B |
| Pole contact composition | 2 NO |
| Network type | AC |
| Utilisation category | AC-1 conforming to IEC 60947-4 |
| control type | Remote control |
| [Uc] control circuit voltage | 230 V AC 50 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Network frequency | 50/60 Hz |
| [Ue] rated operational voltage | 250 V AC 50 Hz |
| Maximum power | 3 W at 250 V AC |
| [Ui] rated insulation voltage | 500 V AC |
| [Uimp] rated impulse withstand voltage | 2.5 kV |
| Control signal type | Maintained |
| Switching frequency | 100 switching operations/day 6 switching operation/minute |
| Local signalling | Color indicator |
| Hold-in power consumption in VA | 3.8 VA |
| Inrush power in VA | 15 VA |
| Mounting mode | Clip-on |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 2 |
| Height | 87 mm |
| Width | 18 mm |
| Depth | 66 mm |
| Product weight | 110 g |
| Colour | White |
| Electrical durability | 100000 cycles IEC/EN 61095 25 A 50 Hz AC-7A 30000 cycles IEC/EN 61095 8.5 A 50 Hz AC-7B 30000 cycles IEC/EN 61095 50 Hz AC-7C 100000 cycles EN/IEC 60947-4-1 50 Hz AC-1 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5a 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5b |
| Connections - terminals | Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid |
| Tightening torque | 0.8 N.m |
| Wire stripping length | 10 mm |
| Product compatibility | No auxiliary |
| Compatibility code | CT |
This Acti9 CT40 is a modular contactor. It is a 2P remote control device with 2 normally open contact. The rated current is 25A for AC-7a and 8.5A for AC-7b. The Ue rated operational voltage is 250VAC. The Uc control voltage is 230VAC. This device could be used for control circuits. This product is compliant with EN/IEC 61095 standard. The maximum switching operations is 100 per day and 6 per minute. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 2.5kV. Pollution degree is 2. It is DIN rail mountable. Its width is 2 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 87mm x (H) 18mm x (D) 66mm. The weight is 120g. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 60 °C. The storage temperature is from -40°C to 60°C.
Main
| Characteristic | Value(s) |
|---|---|
| range of product | Acti9 |
| product name | Acti9 CT40 |
| Product or component type | Contactor |
| Device short name | CT40 |
| Device application | Control circuit |
| Poles | 2P |
| [Ie] rated operational current | 25 A AC-7A 8.5 A AC-7B |
| Pole contact composition | 2 NO |
| Network type | AC |
| Utilisation category | AC-1 conforming to IEC 60947-4 |
| control type | Remote and manual control |
| [Uc] control circuit voltage | 230 V AC 50 Hz |
Complementary
| Characteristic | Value(s) |
|---|---|
| Network frequency | 50/60 Hz |
| [Ue] rated operational voltage | 250 V AC 50 Hz |
| Maximum power | 3 W at 250 V AC |
| [Ui] rated insulation voltage | 500 V AC |
| [Uimp] rated impulse withstand voltage | 2.5 kV |
| Control signal type | Maintained |
| Switching frequency | 6 switching operation/minute 100 switching operations/day |
| Local signalling | Color indicator |
| Hold-in power consumption in VA | 3.8 VA |
| Inrush power in VA | 15 VA |
| Mounting mode | Clip-on |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 2 |
| Height | 87 mm |
| Width | 18 mm |
| Depth | 66 mm |
| Product weight | 120 g |
| Colour | White |
| Electrical durability | 100000 cycles IEC/EN 61095 25 A 50 Hz AC-7A 30000 cycles IEC/EN 61095 8.5 A 50 Hz AC-7B 30000 cycles IEC/EN 61095 50 Hz AC-7C 100000 cycles EN/IEC 60947-4-1 50 Hz AC-1 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5a 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5b |
| Connections - terminals | Power circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6 mm² rigid Control circuit: tunnel type terminals2 cable(s) 2.5 mm² flexible Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid |
| Tightening torque | 0.8 N.m |
| Wire stripping length | 10 mm |
| Product compatibility | No auxiliary |
| Compatibility code | CT |