1 year warranty
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Power supply module |
| Power supply type | Redundant |
Complementary
| Characteristic | Value(s) |
|---|---|
| Input voltage | 115 V 93...138 V) AC 47â¦63 Hz 230 V 170...276 V) AC |
| Input current | 1100 mA 115 V 600 mA 230 V |
| Inrush current | 19 A 230 V 38 A 115 V |
| Rated power in VA | 130 VA |
| Associated fuse rating | 2 A, slow-blow |
| Harmonic distortion | <= 10 % of fundamental rms value |
| Output voltage | 5.1 V DC |
| Power supply output current | 11 A 140 °F (60 °C) standalone 10 A 140 °F (60 °C) redundant |
| Output overvoltage protection | Internal |
| Output overload protection | Internal |
| Power dissipation | 6 + (1.5 x Iout) where Iout is in A |
| Alarm output | 1 NC 6 A 220 V power supply fault |
| Local signalling | 1 LED (green) for power (PWR OK) |
| Marking | CE |
| Module format | Standard |
| Product Weight | 1.43 lb(US) (0.65 kg) |
This programming cordset enables the connection between a Magelis XBT controller and a PC. It is equipped with one USB type mini-B male connector, PC side and one USB type A connector, controller side. It is 1.8 meters long.
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon M340 automation platform Modicon M262 |
| Accessory / separate part category | Connection accessories |
| Accessory / Separate Part Type | Terminal port/USB cordset |
| Accessory / separate part designation | 3.4" small touch screen panel 3.5" small touch screen panel |
| Accessory / separate part destination | Graphic terminal XBTGT, XBTGK, XBTGTW PC terminal |
| Range Compatibility | Harmony GTO Modicon M262 |
| Cable length | 5.9 ft (1.8 m) |
Complementary
| Characteristic | Value(s) |
|---|---|
| Electrical connection | 1 connector USB type A 1 connector mini B USB M340 processor) |
| Product Weight | 0.143 lb(US) (0.065 kg) |
PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.
Mitsubishi Programmable Controller, 85 to 264 V ac, 24 V dc
CPU with 64K of Configurable Memory. 1 x RS232 port, 1 x RS485 port & 1 x 10Mb Base T Ethernet
2 analog inputs
Either current or voltage signal possible
13-bit digital converter resolution
The module is equipped with 2 inputs with 13-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.
This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.
4 analog outputs
Either current or voltage signal possible
16-bit digital converter resolution
The module is equipped with 4 outputs with 16-bit (including sign) digital converter resolution. It is possible to select between the current and voltage signal using different terminals.
| Product | |
| Article Number (Market Facing Number) | 6ES71556BA010CN0 | 6ES71556BA010CN0 |
| Product Description | SIMATIC ET 200SP, PROFIBUS bundle IM, IM 155-6DP HF, max. 32 I/O modules and 16 ET 200AL modules, Multi-hotswap, bundle consists of: Interface module (6ES7155-6BU01-0CN0), Server module (6ES7193-6PA00-0AA0), PROFIBUS connector (6ES7972-0BB70-0XA0) |
| Product family | IM 155-6 |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4047623409465 |
| UPC | 804766848582 |
| Commodity Code | 85176200 |
| LKZ_FDB/ CatalogID | ST76 |
| Product Group | X0FQ |
| Group Code | R151 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.503 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES75221BH100AA0 | 6ES75221BH100AA0 |
| Product Description | SIMATIC S7-1500, digital output module, DQ16xDC 24V/0.5A BA, 16 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. delivery incl. front connector push-in |
| Product family | SM 522 digital output modules |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4047623402510 |
| UPC | 887621779061 |
| Commodity Code | 85389091 |
| LKZ_FDB/ CatalogID | ST73 |
| Product Group | 4501 |
| Group Code | R151 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.688 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES72162AD230XB0 | 6ES72162AD230XB0 |
| Product Description | ***Spare part*** SIMATIC S7-200, CPU 226 Compact unit, DC power supply 24 DI DC/16 DO DC, 16/24 KB progr./10 KB data, 2 PPI/user-programmable interface |
| Product family | Not available |
| Product Lifecycle (PLM) | PM410:Product cancellation |
| Additional Product Information | |
| EAN | 4025515071020 |
| UPC | 662643188813 |
| Commodity Code | 85371091 |
| LKZ_FDB/ CatalogID | ST9-E5 |
| Product Group | 4255 |
| Group Code | R131 |
| Country of origin | China |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 1.030 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES75221BL100AA0 | 6ES75221BL100AA0 |
| Product Description | SIMATIC S7-1500, digital output module, DQ32xDC 24V/0.5A BA, 32 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. delivery incl. front connector push-in |
| Product family | SM 522 digital output modules |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4047623402503 |
| UPC | 887621779054 |
| Commodity Code | 85389091 |
| LKZ_FDB/ CatalogID | ST73 |
| Product Group | 4501 |
| Group Code | R151 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.794 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES73146CF020AB0 | 6ES73146CF020AB0 |
| Product Description | SIMATIC S7-300, CPU 314C-2DP COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 64 KBYTE WORKING MEMORY, FRONT CONNECTOR ( X 40PIN) AND MICRO MEMORY CARD REQUIRED |
| Product family | Not available |
| Product Lifecycle (PLM) | PM500:Discontinued Product or end of PLM & Support |
| Additional Product Information | |
| EAN | 4025515071723 |
| UPC | Not available |
| Commodity Code | 85371091 |
| LKZ_FDB/ CatalogID | ST9-E5 |
| Product Group | 4302 |
| Group Code | R111 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 1.636 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES75121CK010AB0 | 6ES75121CK010AB0 |
| Product Description | SIMATIC S7-1500 Compact CPU CPU 1512C-1 PN, central processing unit with working memory 250 KB for program and 1 MB for data, 32 digital inputs, 32 digital outputs, 5 analog inputs, 2 analog outputs, 6 high speed counters, 4 high speed outputs for PTO/PWM/frequency output 1. interface: PROFINET IRT with 2 port switch, 48 NS bit-performance, incl. front connector push-in, SIMATIC memory card necessary |
| Product family | CPU 1512C-1 PN |
| Product Lifecycle (PLM) | PM300:Active Product |
| Additional Product Information | |
| EAN | 4047623408642 |
| UPC | 804766662577 |
| Commodity Code | 85371091 |
| LKZ_FDB/ CatalogID | ST73 |
| Product Group | 4500 |
| Group Code | R132 |
| Country of origin | China |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 3.419 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES71344MB020AB0 | 6ES71344MB020AB0 |
| Product Description | *** Spare part *** SIMATIC DP, Electronics module 2 AI I High Feature for ET 200S, 15 mm width, Cycle time per module: 0.5 ms, +/-20mA; 15 bit+sign, 4.. 20mA; 15 bit, Operational limit +/-0.1% with SF LED (group fault) |
| Product family | Not available |
| Product Lifecycle (PLM) | PM410:Product cancellation |
| Additional Product Information | |
| EAN | 4025515073529 |
| UPC | 662643231380 |
| Commodity Code | 85389091 |
| LKZ_FDB/ CatalogID | ST76 |
| Product Group | 4467 |
| Group Code | R151 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.097 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
| Product | |
| Article Number (Market Facing Number) | 6ES73221BL000AA0 | 6ES73221BL000AA0 |
| Product Description | SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module) |
| Product family | SM 322 digital output modules |
| Product Lifecycle (PLM) | PM400:Announcement of product phase-out |
| Additional Product Information | |
| EAN | 4025515060932 |
| UPC | 040892560664 |
| Commodity Code | 85389091 |
| LKZ_FDB/ CatalogID | ST73 |
| Product Group | 2288 |
| Group Code | R151 |
| Country of origin | Germany |
| SCIP number | Not available |
| Delivery information | |
| Net Weight (lb) | 0.681 lb |
| Package size unit of measure | Inch |
| Packaging Quantity | 1 |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Analogue input module |
| Type of filter | Single pole low pass - 3 dB at 15 Hz +/- 20 % |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue input number | 8 |
| Input type | Differential |
| Addressing requirement | 9 input words |
| Analogue input resolution | 12 bits |
| Linear measuring range | 1...5 V 4...20 mA |
| Absolute maximum input | 50 V DC 25 mA |
| Input impedance | 250 Ohm current +/- 0.01 % > 20 MOhm voltage |
| Absolute accuracy error | +/- 0.05 % of full scale +/- 0.1 % of full scale maximum |
| Linearity error | +/- 0.04 % |
| Accuracy drift according to temperature | +/- 0.0025 % of full scale/°C <= 0.005 % of full scale/°C |
| Common mode rejection | > - 72 dB 60 Hz |
| Isolation between channels and bus | 1000 V DC 3000 V DC 60 s |
| Isolation between channels | 30 V DC |
| Update time | 5 ms |
| Fault type | Broken wire 4...20 mA Undervoltage range 1...5 V |
| Marking | CE |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault 8 LEDs (green) for channel is turned on 8 LEDs (red) for channel fault |
| Bus current requirement | 240 mA |
| Power dissipation in W | 2 W |
| Module format | Standard |
| Product Weight | 0.7 lb(US) (0.3 kg) |
Main
| Characteristic | Value(s) |
|---|---|
| Range of Product | Modicon Quantum automation platform |
| Product or Component Type | Analogue input module |
| Type of filter | Single pole low pass - 3 dB at 847 Hz +/- 20 % |
Complementary
| Characteristic | Value(s) |
|---|---|
| Analogue input number | 8 |
| Input type | Differential |
| Addressing requirement | 9 input words |
| Analogue input type | Bipolar current 20 mA Bipolar voltage +/- 10 V Bipolar voltage +/- 5 V Unipolar current 0...20 mA Unipolar voltage 0...10 V Unipolar voltage 0...5 V |
| Analogue input resolution | 16 bits +/- 10 V 16 bits +/- 5 V 16 bits 0...10 V 16 bits 0...20 mA 16 bits 0...5 V 16 bits 20 mA |
| Linear measuring range | (input range) x 1.024 mA (input range) x 1.024 V |
| Absolute maximum input | 50 V DC 25 mA |
| Input impedance | > 20 Ohm voltage 250 MOhm +/- 0.03 % |
| Absolute accuracy error | +/- 0.03 % +/- 0.05 % of full scale maximum |
| Linearity error | +/- 0.008 % |
| Accuracy drift according to temperature | +/- 0.0015 % of full scale/°C <= 0.004 % of full scale /°C |
| Common mode rejection | > - 80 dB 60 Hz |
| Isolation between channels and bus | 500 Vrms AC 60 s 750 V DC |
| Isolation between channels | 135 Vrms AC 200 V DC |
| Update time | 10 ms |
| Fault type | Broken wire 4...20 mA Overtacking scale 1...5 V |
| Marking | CE |
| Local signalling | 1 LED (green) for bus communication is present (Active) 1 LED (red) for external fault 8 LEDs (green) for channel is turned on 8 LEDs (red) for channel fault |
| Bus current requirement | 280 mA |
| Power dissipation in W | 2.2 W |
| Module format | Standard |
| Product Weight | 0.7 lb(US) (0.3 kg) |
Serial communication unit, 2x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave
Output module, 16-NPN (transistor sinking) output, 12-24/DC 0.5A max switching capacity, 16 points/1 common, Fujitsu connector, 2 word, 140 mA at 5DC max current consumption
Temperature control module, 4-Platinum resistance Thermometer (Pt100 or JPt100) input, PNP output, 250 mA max at 5/DC
PLC, FX2N Modular extension unit; 16 transistor outputs; sink
FX5;Analog Input Module;4 channels
B & R, CPU Module, 24 V dc, 256 MB SDRAM, 1.5 A, USB/EtherNet, 0.6 W
Digital and analog channels
Selectable current and voltage for AI and AO
Counter functions
The module is a universal mixed module. On this module, digital I/O and analog I/O are combined. A current or voltage signal can be used for the analog I/O as desired. Counter functions on two of the digital inputs expand the range of use.
PLC modules are the expansion and signal processing hardware that extend a programmable logic controller's capabilities beyond the base CPU, covering digital and analog I/O, specialty functions, communication interfaces, and power supply modules installed in the controller rack or station. PLC Direct supplies PLC modules as an independent supplier, carrying surplus sealed, refurbished, and used hardware for maintenance and replacement across the major PLC platforms deployed in installed automation systems.
Where Are PLC Modules Used in Industrial Environments?
PLC modules are used wherever a base PLC controller requires additional I/O channels, signal types, or functional capabilities beyond what the CPU alone provides, from local rack expansion to distributed I/O stations across a facility. These components are present in virtually every modular PLC installation, handling field signal acquisition, output control, specialty measurement, and network communication alongside the controller CPU.
Facilities and operations that depend on PLC modules include:
-
Discrete manufacturing plants expanding PLC I/O capacity at machine control panels and distributed field cabinets across production lines.
-
Food and beverage processing facilities adding analog input and output modules for temperature, pressure, and flow measurement in batch and continuous process control.
-
Automotive assembly operations using specialty function modules for high-speed counter inputs, encoder feedback, and motion control coordination.
-
Water and wastewater treatment plants extending PLC I/O across pump station control panels and remote treatment process equipment.
-
Packaging and material handling operations where high channel-count digital I/O modules handle the sensor and actuator density of automated sorting and conveyor systems.
A failed or discontinued PLC module in a production system requires a like-for-like replacement to restore the channel capacity and signal type that the controller program depends on.
Which Brands of PLC Modules Does PLC Direct Stock?
PLC Direct stocks PLC modules across the major controller platforms deployed in installed automation systems worldwide.
-
Siemens SIMATIC S7-1200, S7-1500, and ET 200SP modules: Analog input modules across the SM1231 series, digital I/O modules for S7-1200 and S7-1500 racks, and ET 200SP distributed I/O modules including AI and DI/DQ types with PROFINET interface modules confirmed in stock.
-
Omron CJ Series I/O and special function modules: CJ1W digital input, digital output, and analog I/O modules alongside special function modules including high-speed counter units and expansion I/O control units for installed CJ Series PLC architectures.
-
Schneider Electric Modicon Quantum and M580 I/O modules: Discrete and analog expansion modules for the Modicon Quantum 140-series platform and Modicon M580 BMEP/BMEH series, covering the full range of field signal types used in installed Modicon process and machine control systems.
-
B&R X20 System I/O modules: Digital and analog I/O modules, power supply modules, and interface components within the X20 modular system, used in machine and line automation architectures with POWERLINK communication.
PLC Direct carries PLC modules as surplus sealed, refurbished, and used hardware, giving maintenance teams options across condition grades and budget requirements.
What Should You Know Before Ordering PLC Modules?
Hardware condition options: PLC Direct supplies PLC modules in surplus sealed, refurbished, and used condition. Surplus sealed units are factory-sealed stock that has not been previously installed; refurbished modules have been inspected and tested to confirm operational functionality; used hardware is sourced from decommissioned systems and suits facilities managing lifecycle replacements under budget constraints.
Compatibility and part identification: PLC modules are platform-specific and must be matched to the correct controller series, rack or backplane type, and in some cases, firmware version of the installed CPU. A Siemens S7-1200 signal module, for example, is not compatible with an S7-1500 rack, and ET 200SP peripheral modules require a matched interface module for the network protocol in use. Confirm the full module part number, controller series, and rack slot requirements from the installed system's documentation before ordering.
Warranty: All PLC module hardware purchased from PLC Direct carries a standard 1-year PLC Direct warranty covering defects and functionality, applicable to surplus sealed, refurbished, and used products.
PLC Direct supplies PLC module hardware for replacement and maintenance purposes and does not provide system design, programming, or integration services.