Measurement Sensors

Showing 73 - 96 of 719 products

3,499.00 kr

Only 1 unit left

Specifications

Model				OP-87907
Type				Ethernet cable
Length				1 m 3.28'
Weight				Approx. 100 g

Keyence OP-87906 Keyence

1,636.00 kr

Only 5 units left

Specifications

Model				OP-87906
Type				I/O cable
Length				3 m 9.84'
Weight				Approx. 230 g

Keyence OP-87905 Keyence

2,194.00 kr

Only 5 units left

Specifications

Model				OP-87905
Type				Cable between sensor head amplifier
Length				10 m 32.81'
Weight				Approx. 400 g

Keyence OP-87904 Keyence

1,727.00 kr

In stock, 12 units

Specifications

Model				OP-87904
Type				Cable between sensor head amplifier
Length				5 m 16.40'
Weight				Approx. 360 g

Keyence OP-87903 Keyence

1,844.00 kr

Only 6 units left

Specifications

Model				OP-87903
Type				Cable between sensor head amplifier
Length				2 m 6.56'
Weight				Approx. 110 g

Keyence OP-87459 Keyence

1,844.00 kr

In stock, 11 units

Specifications

Model				OP-87459
Type				NFPA79-compatible Ethernet cable
Cable end				M12 4-pin - RJ-45
Length				10 m 32.8'

Keyence OP-87458 Keyence

1,844.00 kr

Only 9 units left

Specifications

Model				OP-87458
Type				NFPA79-compatible Ethernet cable
Cable end				M12 4-pin / RJ45
Length				5 m 16.4'

Keyence OP-87457 Keyence

1,844.00 kr

In stock, 11 units

Specifications

Model				OP-87457
Type				NFPA79-compatible Ethernet cable
Cable end				M12 4-pin / RJ45
Length				2 m 6.6'

Keyence OP-87445 Keyence

2,310.00 kr

Only 5 units left

Specifications

Model				OP-87445
Type				Panel power cable
Cable end				M8 4-pin - strand wire
Length				10 m 32.8'

Keyence OP-87444 Keyence

1,547.00 kr

Only 8 units left

Specifications

Model				OP-87444
Type				Monitor power cable
Cable end				M8 4-pin / Strand wire
Length				5 m 16.4'

Keyence IX-H1 Keyence

1,656.00 kr

Only 9 units left

Specifications

Model		IX-H1
System requirements	Interface	Equip the Ethernet (100BASE-TX) interface
	OS	Either Windows 7 (SP1 or higher) Home Premium/ Professional/Ultimate or Windows 10 Home/Pro/ Enterprise Windows 11 Home/Pro/Enterprise must be pre-installed ^*1
	Languages	English/Japanese/German/Simplified Chinese/Italian/French/Spanish ^*2
	Processor	Compliant with OS system requirements
	Memory capacity
	Required capacity for installation	1 GB or more
	Monitor	Resolution: 1024 × 768 pixels or higher, Display color: High Color (16 bits) or higher
	Operating conditions	.NET Framework 4.5.2 or later installed ^*3
^1 Windows 7/Windows 10: Both 32-bit and 64-bit versions are supported. ^2 Only English, Japanese, and Simplified Chinese are supported when connected to the IX-H2000/H2050. ^*3 If .NET Framework 4.5.2 is not installed, it will be automatically installed during IV-H1 installation.

Keyence IX-CP50 Keyence

9,892.00 kr

In stock, 17 units

Specifications

Model		IX-CP50
Display panel		5.7" TFT color LCD, 640 × 480 (VGA)
Backlight	Method	White LED
	Duration	Approx. 50,000 hours (25°C 77°F)
Touch panel	Method	Analog resistive
	Actuating force	0.8 N or less
Ethernet	Standard	100BASE-TX/10BASE-T ^*1
	Connector	M12 4-pin connector ^*1
Languages		English/Japanese/German/Simplified Chinese/Italian/French/Spanish ^*2
Expanded memory		USB memory ^*3
Ratings	Power voltage	24 VDC ±10% (including ripple)
	Current consumption	0.3 A or less
Environmental resistance	Enclosure rating	IP40
	Ambient temperature	0 to +50°C 32 to 122°F (No freezing)
	Relative humidity	35 to 85% RH (No condensation) ^*4
	Drop resistance	1.3 m 4.3' onto concrete (2 times in an arbitrary direction)
	Vibration resistance	10 to 55 Hz; double amplitude 0.7 mm 0.03"; 2 hours in each of the X, Y, and Z directions
Material		Main unit case: PC / Power connector: Brass + Ni plating / Ethernet cable connector: Zinc + Ni plating, PA / USB connector cover: EDPM / Pen holder: PC / Adapter fixing hook: POM / LED lamp cover: PC / Mounting adapter: PC / Stylus: POM
Weight		Main unit: Approx. 450 g With wall mounting adapter and stylus attached: Approx. 485 g
^1 Dedicated for use in connecting to the IX-1000/1050/H2000/H2050. ^2 Only English, Japanese, and Simplified Chinese are supported when connected to the IX-H2000/H2050. ^3 Use only products recommended by KEYENCE. ^4 If the ambient operating temperature exceeds 40°C 104°F, use the product under conditions where the absolute humidity is 85% RH or less at 40°C 104°F.

Keyence IX-360W Keyence

27,488.00 kr

In stock, 17 units

Specifications

Model				IX-360W
Reference distance				360 mm 14.17"
Measuring distance				280 to 440 mm 11.02" to 17.32"
Detection area	Scan mode			Measuring distance of 280 mm 11.02": 150 × 113 mm 5.91" × 4.45" Measuring distance of 360 mm 14.17": 192 × 144 mm 7.56" × 5.67" Measuring distance of 440 mm 17.32": 234 × 176 mm 9.21" × 6.93" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 280 mm 11.02": 150 mm 5.91" Measuring distance of 360 mm 14.17": 192 mm 7.56" Measuring distance of 440 mm 17.32": 234 mm 9.21" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class 2 laser product (IEC 60825-1: 2014, FDA [CDRH] Part 1040.10 ^*2)
	Output			2.8 mW
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø3.8 mm ø0.1496" ^*3
			Average height	ø2.6 mm ø0.1024" ^*4
			Pin height	ø1.9 mm ø0.0748" ^*5
		Line mode		2.6 mm × 2.6 mm 0.1024" × 0.1024" ^*6
	Repeatability			150 μm ^*7
Width(X direction)	Minimum edge detection	Line mode		2 mm 0.0787" ^*8
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*7
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*9
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 3000 lux or less ^*10
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*11
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 300 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^3 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^6 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^7 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^8 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^9 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^10 Using the default settings with a laser light source as the target. ^*11 With metal mounting.

Keyence IX-360 Keyence

20,317.00 kr

In stock, 15 units

Specifications

Model				IX-360
Reference distance				360 mm 14.17"
Measuring distance				280 to 440 mm 11.02" to 17.32"
Detection area	Scan mode			Measuring distance of 280 mm 11.02": 66.0 × 49.5 mm 2.6" × 1.95" Measuring distance of 360 mm 14.17": 84.0 × 63.0 mm 3.31" × 2.48" Measuring distance of 440 mm 17.32": 102.0 × 76.5 mm 4.02" × 3.01" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 280 mm 11.02": 66.0 mm 2.6" Measuring distance of 360 mm 14.17": 84.0 mm 3.31" Measuring distance of 440 mm 17.32": 102.0 mm 4.02" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class II laser product (FDA [CDRH] Part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
	Output			0.95 mW (FDA [CDRH] Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø1.8 mm ø0.0709" ^*2
			Average height	ø1.2 mm ø0.0472" ^*3
			Pin height	ø0.9 mm ø0.0354" ^*4
		Line mode		1.2 mm × 1.5 mm 0.0472" × 0.0591" ^*5
	Repeatability			150 μm ^*6
Width(X direction)	Minimum edge detection	Line mode		1 mm 0.0394" ^*7
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*6
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.08% of F.S./°C ^*8
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 5000 lux or less ^*9
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*10
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 190 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^3 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^6 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^7 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^8 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^9 Using the default settings with a laser light source as the target. ^10 With metal mounting.

Keyence IX-150 Keyence

11,803.00 kr

Only 9 units left

Specifications

Model				IX-150
Reference distance				150 mm 5.91"
Measuring distance				100 to 200 mm 3.94" to 7.87"
Detection area	Scan mode			Measuring distance of 100 mm 3.94": 56.5 × 42.0 mm 2.22" × 1.65" Measuring distance of 150 mm 5.91": 82.5 × 61.5 mm 3.25" × 2.42" Measuring distance of 200 mm 7.87": 108.5 × 81.0 mm 4.27" × 3.19" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 100 mm 3.94": 56.5 mm 2.22" Measuring distance of 150 mm 5.91": 82.5 mm 3.25" Measuring distance of 200 mm 7.87": 108.5 mm 4.27" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class II laser product (FDA [CDRH] Part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
	Output			0.95 mW (FDA [CDRH] Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø1.7 mm ø0.0669" ^*2
			Average height	ø0.9 mm ø0.0354" ^*3
			Pin height	ø0.8 mm ø0.0315" ^*4
		Line mode		1.1 mm × 1.1 mm 0.0433" × 0.0433" ^*5
	Repeatability			50 μm ^*6
Width(X direction)	Minimum edge detection	Line mode		0.5 mm 0.0197" ^*7
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*6
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*8
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 5000 lux or less ^*9
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*10
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 190 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^3 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^6 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^7 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^8 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^9 Using the default settings with a laser light source as the target. ^10 With metal mounting.

Keyence IX-080 Keyence

11,244.00 kr

Only 7 units left

Specifications

Model				IX-080
Reference distance				80 mm 3.15"
Measuring distance				62 to 98 mm 2.44" to 3.86"
Detection area	Scan mode			Measuring distance of 62 mm 2.44": 36.5 × 27.0 mm 1.44" × 1.06" Measuring distance of 80 mm 3.15": 45.5 × 34.0 mm 1.79" × 1.34" Measuring distance of 98 mm 3.86": 54.5 × 41.0 mm 2.15" × 1.61" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 62 mm 2.44": 36.5 mm 1.44" Measuring distance of 80 mm 3.15": 45.5 mm 1.79" Measuring distance of 98 mm 3.86": 54.5 mm 2.15" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class II laser product (FDA [CDRH] Part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
	Output			0.95 mW (FDA [CDRH] Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø1.0 mm ø0.0394" ^*2
			Average height	ø0.5 mm ø0.0197" ^*3
			Pin height	ø0.4 mm ø0.0157" ^*4
		Line mode		0.7 mm × 0.7 mm 0.0276" × 0.0276" ^*5
	Repeatability			20 μm ^*6
Width(X direction)	Minimum edge detection	Line mode		0.4 mm 0.0157" ^*7
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*6
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*8
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 5000 lux or less ^*9
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*10
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 190 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^3 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^6 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^7 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^8 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^9 Using the default settings with a laser light source as the target. ^10 With metal mounting.

Keyence IX-055 Keyence

14,044.00 kr

In stock, 12 units

Specifications

Model				IX-055
Reference distance				55 mm 2.17"
Measuring distance				45 to 65 mm 1.77" to 2.56"
Detection area	Scan mode			Measuring distance of 45 mm 1.77": 27.5 × 20.5 mm 1.08" × 0.81" Measuring distance of 55 mm 2.17": 32.5 × 24.5 mm 1.28" × 0.96" Measuring distance of 65 mm 2.56": 37.5 × 28.5 mm 1.48" × 1.12" (X direction) × (Y direction) ^*1
	Line mode			Measuring distance of 45 mm 1.77": 27.5 mm 1.08" Measuring distance of 55 mm 2.17": 32.5 mm 1.28" Measuring distance of 65 mm 2.56": 37.5 mm 1.48" (X direction) ^*1
Laser Light source	Light source			660 nm (visible light) wavelength red semiconductor laser
	Laser class			Class II laser product (FDA [CDRH] Part 1040.10), Class 2 laser product (IEC 60825-1: 2014)
	Output			0.95 mW (FDA [CDRH] Part 1040.10), 1.6 mW (IEC 60825-1: 2014)
Height(Z direction)	Minimum detectable object size	Scan mode	Height	ø0.7 mm ø0.0276" ^*2
			Average height	ø0.4 mm ø0.0157" ^*3
			Pin height	ø0.3 mm ø0.0118" ^*4
		Line mode		0.5 mm × 0.5 mm 0.0197" × 0.0197" ^*5
	Repeatability			10 μm ^*6
Width(X direction)	Minimum edge detection	Line mode		0.3 mm 0.0118" ^*7
Estimated detection				(When measuring the height between two points, the minimum step difference is as follows. IX-055: 100 μm / IX-080: 200 μm / IX-150: 500 μm / IX-360: 1000 μm / IX-360W: 1000 μm) ^*6
Sampling cycle	Scan mode			120 ms (min.) (typical)
	Line mode			6 ms / 11 ms (selectable)
Image receiving element				Monochrome CMOS image sensor
Image capture lighting	Light source			Red LED
	Lighting method			Pulse lighting
Temperature characteristics				0.04% of F.S./°C ^*8
Environmental resistance	Enclosure rating			IP67
	Ambient light			Incandescent lamp, 5000 lux or less ^*9
	Ambient temperature			0 to +45°C 32 to 113°F (No freezing) ^*10
	Relative humidity			35 to 85% RH (No condensation)
	Vibration resistance			10 to 55 Hz; double amplitude 1.5 mm 0.06"; 2 hours in each of the X, Y, and Z directions
	Shock resistance			500 m/s² 1640'/s², 3 times in each of the 3 directions
Material				Main unit case: Zinc die-casting / Front cover: Glass, acrylic (hard coat) / Operation indicator cover: TPU / Connector ring: PBT / Connector: Zinc die-casting
Weight				Approx. 190 g
^1 X: Long-side direction of laser, Y: Short-side direction of laser ^2 With a correct reference distance. When measuring using the height tool, measurement point min., and no position adjustment in scan mode. ^3 With a correct reference distance. When measuring using the average height tool, average size min., and no position adjustment in scan mode. ^4 With a correct reference distance. When measuring using the pin height tool and no position adjustment in scan mode. ^5 With a correct reference distance. When measuring using the height tool, tool window size min., and no position adjustment in line mode. ^6 When measuring a KEYENCE reference target (white diffuser) in the center of the field of view at the reference distance in scan mode using the “Max.” measurement point of a height tool. ^7 With a correct reference distance. When measuring metal gauge blocks in line mode using a 4-count averaging filter and the edge positioning tool with no position adjustment. In width mode with the width/diameter tool, the minimum detection value is twice the minimum edge detection. The minimum height differences (estimated) required for edge detection of each model at the reference distance are as follows. IX-055: 0.8 mm 0.03", IX-080: 1.0 mm 0.04", IX-150: 2 mm 0.08", IX-360: 4 mm 0.16", IX-360W: 4 mm 0.16" ^8 At the reference distance from the target. The F.S. for each model are as follows. IX-055: ±10 mm ±0.39", IX-080: ±18 mm ±0.71", IX-150: ±50 mm ±1.97", IX-360: ±80 mm ±3.15", IX-360W: ±80 mm ±3.15" ^9 Using the default settings with a laser light source as the target. ^10 With metal mounting.

Keyence IX-H2050 Keyence

12,923.00 kr

Only 6 units left

Specifications

Model			IX-H2050
Main unit / expansion unit			Expansion unit
Display	Min. display unit	Z axis	10 μm ^*1
		X axis	50 μm ^*1
	Display range	Z axis	±999.99 to ±999 mm 39.33" (with 4 selectable steps) ^*1
		X axis	±999.95 to ±999 mm 39.33" (with 4 selectable steps) ^*1
Tools	Scan mode		Height, Step, Average height, Pin height, MAX/MIN, Height area, Monochrome area, Width, Step calculation, Thickness calculation, Position adjustment, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgment: 16 tools, Position adjustment: 1 tool^*2
	Line mode		Height (Ave./Max./Min.), Step (Ave./Max./Min.), Edge position, Width/diameter, Step/width calculation, Thickness calculation, Position adjustment, Tilt adjustment (Max. number of settings) Judgment: 16 tools ^3, Position adjustment: 1 tool, Tilt adjustment: 1 tool^2
Other functions	Common		Zero/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording, Capture mode (HDR), Sensor date/time information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF), Total judgment conditions, NPN/PNP switching, Simultaneous main unit/expansion unit input, Mutual interference prevention, Security
	Scan mode		Measurement range, Measurement position (small/standard/large), Measurement mode, Measurement noise elimination, Imaging mode (high gain), Tilt correction (fixed or real-time correction), Glare removal, Trigger input (internal/external), Trigger interval, Trigger delay, Trigger error, Monochrome histogram, Area height histogram, Fixed reference area, Mask outline, Rotation range, Height image display on tool setting screen, Scaling function
	Line mode		Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement, HOLD function, Alarm setting, Measurement method (Ave./Max./Min.), Laser sensitivity adjustment, Averaging filter, Median filter, X-axis median filter
Input	Input		Switchable between non-voltage input and voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs		8 (IN1 to IN8)
	Function		IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Laser emission stop, Zero/offset (batch), Reset (error only), Reset (judgment value only) Reset (judgment value and error)
Output	Output		Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 2 V or less
	Number of inputs		10 (OUT1 to OUT10)
	Function		Enable by assigning the optional functions Assignable functions: Total judgment result (All OK/Any OK/NG), Run, Busy, Error, Position adjustment result, Tilt adjustment result, Result of the logical operation of each tool, Monochrome area / Height area tool result (OK/NG), Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Alarm
Analog voltage output			Not available
Analog current output
Number of programs			32
Statistical information			Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) ^1 ^4
Detection history	Saved history	Scan mode	50 (FTP/SFTP client function: Enabled/High-resolution mode: Enabled) 80 (FTP/SFTP client function: Enabled/High-resolution mode: Disabled) 70 (FTP/SFTP client function: Disabled/High-resolution mode: Enabled) 100 (FTP/SFTP client function: Disabled/High-resolution mode: Disabled) ^*5
		Line mode	400 (FTP/SFTP client function: Enabled/High-resolution mode: -) 500 (FTP/SFTP client function: Disabled/High-resolution mode: -) ^*5
	Save conditions		Selectable between NG only and All ^*5
Image data transmission (FTP/SFTP client function)	Destination		FTP/SFTP server
	Method		Selectable between bmp, jpeg, and txt
	Conditions		4 conditions Selectable between All, Total judgment result (OK/NG), Result of each tool (OK/(NG and ALM)), and Result of the logical operation of each tool (OK/NG)
Ethernet	Standard		Not available ^*6
	Connector
Interface compatibility			CC-Link, DeviceNet®, EtherNet/IP™, EtherCAT®, RS-232C, BCD output, TCP/IP non-procedural communication ^*7
Number of connectible units			Main units: 1, Expansion units: 1, Communication units (DL): 1
Ratings	Power voltage		Supplied from main unit
	Current consumption		Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load) ^*8
Environmental resistance	Ambient temperature		0 to +50°C 32 to 122°F (No freezing)
	Relative humidity		35 to 85% RH (No condensation)
Material			Main unit case: PC / Power connector: PA, POM / Analog output connector: PA, POM / I/O connector: PA / Head connector: Zinc + Ni plating, PA / Ethernet connector: Copper alloy + Ni plating / Rear heat sink: Aluminum / Main unit rear DIN rail fixing tab: POM / Nameplate: PC
Weight			Approx. 190 g
^1 For displaying on an IX Series control panel or PC software. ^2 Configurable for each program. ^3 Up to 8 tools can be used for the diameter tool only. ^4 When sample hold (edge), peak/bottom/P-P hold (level/edge) is set. ^5 Saves to the sensor amplifier’s internal memory. Detection history saved inside the sensor amplifier can be backed up to a PC using the USB memory stick connected to the IX Series control panel or PC software. ^6 For connection to an IX Series control panel or PC software. The RJ45 connector on the main unit is used for connecting to the expansion unit. ^7 When a DL Series device is used. Contact KEYENCE for information on other interfaces. ^8 Includes a DL Series communication unit.

Keyence IX-H2000 Keyence

11,803.00 kr

In stock, 17 units

Specifications

Model			IX-H2000
Main unit / expansion unit			Main unit
Display	Min. display unit	Z axis	10 μm ^*1
		X axis	50 μm ^*1
	Display range	Z axis	±999.99 to ±999 mm 39.33" (with 4 selectable steps) ^*1
		X axis	±999.95 to ±999 mm 39.33" (with 4 selectable steps) ^*1
Tools	Scan mode		Height, Step, Average height, Pin height, MAX/MIN, Height area, Monochrome area, Width, Step calculation, Thickness calculation, Position adjustment, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgment: 16 tools, Position adjustment: 1 tool^*2
	Line mode		Height (Ave./Max./Min.), Step (Ave./Max./Min.), Edge position, Width/diameter, Step/width calculation, Thickness calculation, Position adjustment, Tilt adjustment (Max. number of settings) Judgment: 16 tools ^3, Position adjustment: 1 tool, Tilt adjustment: 1 tool^2
Other functions	Common		Zero/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording, Capture mode (HDR), Sensor date/time information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF), Total judgment conditions, NPN/PNP switching, Simultaneous main unit/expansion unit input, Mutual interference prevention, Security
	Scan mode		Measurement range, Measurement position (small/standard/large), Measurement mode, Measurement noise elimination, Imaging mode (high gain), Tilt correction (fixed or real-time correction), Glare removal, Trigger input (internal/external), Trigger interval, Trigger delay, Trigger error, Monochrome histogram, Area height histogram, Fixed reference area, Mask outline, Rotation range, Height image display on tool setting screen, Scaling function
	Line mode		Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement, HOLD function, Alarm setting, Measurement method (Ave./Max./Min.), Laser sensitivity adjustment, Averaging filter, Median filter, X-axis median filter
Input	Input		Switchable between non-voltage input and voltage input For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs		8 (IN1 to IN8)
	Function		IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Laser emission stop, Zero/offset (batch), Reset (error only), Reset (judgment value only) Reset (judgment value and error)
Output	Output		Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit), residual voltage of 2 V or less
	Number of inputs		10 (OUT1 to OUT10)
	Function		Enable by assigning the optional functions Assignable functions: Total judgment result (All OK/Any OK/NG), Run, Busy, Error, Position adjustment result, Tilt adjustment result, Result of the logical operation of each tool, Monochrome area / Height area tool result (OK/NG), Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Alarm
Analog voltage output			±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω ^*4
Analog current output			4 to 20 mA, Max. load resistance: 350 Ω ^*4
Number of programs			32
Statistical information			Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) ^1 ^5
Detection history	Saved history	Scan mode	50 (FTP/SFTP client function: Enabled/High-resolution mode: Enabled) 80 (FTP/SFTP client function: Enabled/High-resolution mode: Disabled) 70 (FTP/SFTP client function: Disabled/High-resolution mode: Enabled) 100 (FTP/SFTP client function: Disabled/High-resolution mode: Disabled) ^*6
		Line mode	400 (FTP/SFTP client function: Enabled/High-resolution mode: -) 500 (FTP/SFTP client function: Disabled/High-resolution mode: -) ^*6
	Save conditions		Selectable between NG only and All ^*6
Image data transmission (FTP/SFTP client function)	Destination		FTP/SFTP server
	Method		Selectable between bmp, jpeg, and txt
	Conditions		4 conditions Selectable between All, Total judgment result (OK/NG), Result of each tool (OK/(NG and ALM)), and Result of the logical operation of each tool (OK/NG)
Ethernet	Standard		100BASE-TX/10BASE-T ^*7
	Connector		RJ45 8-pin connector ^*7
Interface compatibility			CC-Link, DeviceNet®, EtherNet/IP™, EtherCAT®, RS-232C, BCD output, TCP/IP non-procedural communication ^*8
Number of connectible units			Main units: 1, Expansion units: 1, Communication units (DL): 1
Ratings	Power voltage		24 VDC ±10% (including ripple)
	Current consumption		Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load) ^*9
Environmental resistance	Ambient temperature		0 to +50°C 32 to 122°F (No freezing)
	Relative humidity		35 to 85% RH (No condensation)
Material			Main unit case: PC / Power connector: PA, POM / Analog output connector: PA, POM / I/O connector: PA / Head connector: Zinc + Ni plating, PA / Ethernet connector: Copper alloy + Ni plating / Rear heat sink: Aluminum / Main unit rear DIN rail fixing tab: POM / Nameplate: PC
Weight			Approx. 210 g
^1 For displaying on an IX Series control panel or PC software. ^2 Configurable for each program. ^3 Up to 8 tools can be used for the diameter tool only. ^4 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^5 When sample hold (edge), peak/bottom/P-P hold (level/edge) is set. ^6 Saves to the sensor amplifier’s internal memory. Detection history saved inside the sensor amplifier can be backed up to a PC using the USB memory stick connected to the IX Series control panel or PC software. ^7 For connection to an IX Series control panel or PC software. The RJ45 connector on the main unit is used for connecting to the expansion unit. ^8 When a DL Series device is used. Contact KEYENCE for information on other interfaces. ^*9 Includes a DL Series communication unit.

Keyence IX-1050 Keyence

9,428.00 kr

Only 6 units left

Specifications

Model			IX-1050
Main unit / expansion unit			Expansion unit
Display	Min. display unit		10 µm^*1
	Display range		±999.99 to ±999 mm (with 4 selectable steps)^*1
Tools	Scan mode		Height, Height difference, Max./Min., Height difference calculation, Thickness calculation, Height detection, Monochromatic detection, Position adjustment (Max. number of settings) Detection: 16 tools, Position adjustment: 1 tool^*2
	Line mode		Height (Ave./Max./Min.) , Height difference (Ave./Max./Min.) , Height difference calculation, Thickness calculation, Position adjustment, Tilt correction (Max. number of settings) Detection: 16 tools, Position adjustment: 1 tool, Alignment adjustment: 1 tool^*2
Other functions	Common		ZERO/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording,Capture mode (HDR) Sensor date/time Information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF) , Total judgment conditions,NPN/PNP switching, Simultaneous main unit/expansion unit input, Light interference prevention, Security
	Scan mode		Measurement range, Measurement position (small/standard/large) , Measurement mode, Measurement noise elimination, Imaging mode (high gain) , Tilt correction (fixed or real-time correction) , Glare removal, Trigger input (internal/external) , Trigger interval, Trigger delay, Trigger error, Monochrome histogram, Fixed reference area, Mask outline, Rotation range
	Line mode		Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement, HOLD function, Alarm setting, Measurement method (Ave./Max./Min.)
Input	Input		Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs		8 (IN1 to IN8)
	Function		IN1: External trigger up/down timing, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Laser emission stop, Zero/offset (batch) , Reset (error only) , Reset (judgment value only) Reset (judgment value and error)
Output	Output		Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit) , residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit) , residual voltage of 2 V or less
	Number of inputs		10 (OUT1 to OUT10)
	Function		Enable by assigning the optional functions Assignable functions: Total judgment result (All OK, Any OK/NG) , run, busy, error, position adjustment result, tilt correction result, Monochromatic detection/Height detection tool result (OK/NG) , Height/height difference/Max./Min./calculation tool result (OK/NG/HIGH/LO) , Alarm
Analog voltage output			Not available
Analog current output
Number of programs			32
Statistical information			Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers)^1^3
Detection record	Number of storage	Scan mode	80 images (FTP/SFTP Client function: Enable) 100 images (FTP/SFTP Client function: Disable) ^*4
		Line mode	400 images (FTP/SFTP Client function: Enable) 500 images (FTP/SFTP Client function: Disable) ^*4
Detection history	Save conditions		NG only/All is selectable^*4
FTP/SFTP data transfer (FTP/SFTP client function)	Transfer Destination		FTP/SFTP server
	Transfer format		bmp/jpeg/txt is selectable
	Transfer Condition		4 conditions All / Total status result (OK/NG) / Result for each tool (OK/(NG and ALM)) is selectable
Ethernet	Standard		Not available
	Connector
Interface compatibility			CC-Link / DeviceNet® / EtherNet/IP™ / EtherCAT^Ⓡ / RS-232C / BCD / PROFINET / PROFIBUS / TCP/IP output^*5
Number of connectible units			Main units: 1, Expansion units: 1, Communication units (DL) : 1
Ratings	Power voltage		Supplied from main unit
	Current consumption		Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load)^*6
Environmental resistance	Ambient temperature		0 to +50°C 32 to 122°F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
Material			Main unit case: PC/Power connector: PA, POM/Analog output connector: PA, POM/I/O connector: PA/ Head connector: Zinc + Ni plating, PA/Ethernet connector: Copper alloy + Ni plating/ Rear heat sink: Aluminum/Main unit rear DIN rail fixing tab: POM/Nameplate: PC
Weight			Approx. 190 g
^1 For displaying on an IX Series control panel or PC software. ^2 Configurable for each program. ^3 When sample hold (edge), peak/bottom/P-P hold (level/edge) is set. ^4 Saves to the inner memory of sensor amplifier. The detection history saved in the sensor amplifier can be copied to PC as a backup by using the PC software or the USB mounted on the control panel for IX series. ^5 When a DL Series device is used. Contact KEYENCE for information on other interfaces. ^6 Includes a DL Series communication unit.

Keyence IX-1000 Keyence

9,428.00 kr

In stock, 18 units

Specifications

Model			IX-1000
Main unit / expansion unit			Main unit
Display	Min. display unit		10 µm^*1
	Display range		±999.99 to ±999 mm (with 4 selectable steps)^*1
Tools	Scan mode		Height, Height difference, Max./Min., Height difference calculation, Thickness calculation, Height detection, Monochromatic detection, Position adjustment (Max. number of settings) Detection: 16 tools, Position adjustment: 1 tool^*2
	Line mode		Height (Ave./Max./Min.) , Height difference (Ave./Max./Min.) , Height difference calculation, Thickness calculation, Position adjustment, Tilt correction (Max. number of settings) Detection: 16 tools, Position adjustment: 1 tool, Alignment adjustment: 1 tool^*2
Other functions	Common		ZERO/offset, Operating threshold adjustment, 2-point calibration, Measurement direction, Position correction NG measurement, Zero/offset recording,Capture mode (HDR) Sensor date/time Information addition, N.O./N.C. switching, I/O monitor, Automatic brightness adjustment, Lighting (ON/OFF) , Total judgment conditions,NPN/PNP switching, Simultaneous main unit/expansion unit input, Light interference prevention, Security
	Scan mode		Measurement range, Measurement position (small/standard/large) , Measurement mode, Measurement noise elimination, Imaging mode (high gain) , Tilt correction (fixed or real-time correction) , Glare removal, Trigger input (internal/external) , Trigger interval, Trigger delay, Trigger error, Monochrome histogram, Fixed reference area, Mask outline, Rotation range
	Line mode		Average count, Laser position adjustment, Timing input, Head tilt correction (fixed only), Ambient light removal for measurement, HOLD function, Alarm setting, Measurement method (Ave./Max./Min.)
Input	Input		Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
	Number of inputs		8 (IN1 to IN8)
	Function		IN1: External trigger up/down timing, IN2 to IN8: Enable by assigning optional functions Assignable functions: Program switching, Laser emission stop, Zero/offset (batch) , Reset (error only) , Reset (judgment value only) Reset (judgment value and error)
Output	Output		Open collector output; NPN/PNP switchable, N.O./N.C. switchable For open collector NPN output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit) , residual voltage of 1.5 V or less For open collector PNP output: Maximum rating of 26.4 V, 50 mA (20 mA when linked to an expansion unit) , residual voltage of 2 V or less
	Number of inputs		10 (OUT1 to OUT10)
	Function		Enable by assigning the optional functions Assignable functions: Total judgment result (All OK, Any OK/NG) , run, busy, error, position adjustment result, tilt correction result, Monochromatic detection/Height detection tool result (OK/NG) , Height/height difference/Max./Min./calculation tool result (OK/NG/HIGH/LO) , Alarm
Analog voltage output			±5 V, 1 to 5 V, 0 to 5 V, Output impedance: 100 Ω^*3
Analog current output			4 to 20 mA, max. load resistance: 350 Ω^*3
Number of programs			32
Statistical information			Scan mode: Measured value / Degree of similarity (Max., Min., Ave.), Processing time (Latest, Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers) Line mode: Measured value / Degree of similarity (Max., Min., Ave.), Count (Number of OKs / Number of NGs / Number of triggers)^1^4
Detection record	Number of storage	Scan mode	80 images (FTP/SFTP Client function: Enable) 100 images (FTP/SFTP Client function: Disable) ^*5
		Line mode	400 images (FTP/SFTP Client function: Enable) 500 images (FTP/SFTP Client function: Disable) ^*5
Detection history	Save conditions		NG only/All is selectable^*5
FTP/SFTP data transfer (FTP/SFTP client function)	Transfer Destination		FTP/SFTP server
	Transfer format		bmp/jpeg/txt is selectable
	Transfer Condition		4 conditions All / Total status result (OK/NG) / Result for each tool (OK/(NG and ALM)) is selectable
Ethernet	Standard		100BASE-TX/10BASE-T^*6
	Connector		RJ45 8-pin connector^*6
Interface compatibility			CC-Link / DeviceNet® / EtherNet/IP™ / EtherCAT^Ⓡ / RS-232C / BCD / PROFINET / PROFIBUS / TCP/IP output^*7
Number of connectible units			Main units: 1, Expansion units: 1, Communication units (DL) : 1
Ratings	Power voltage		24 VDC ±10 % (including ripple)
	Current consumption		Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load)^*8
Environmental resistance	Ambient temperature		0 to +50°C 32 to 122°F (No freezing)
	Relative humidity		35 to 85 % RH (No condensation)
Material			Main unit case: PC/Power connector: PA, POM/Analog output connector: PA, POM/I/O connector: PA/ Head connector: Zinc + Ni plating, PA/Ethernet connector: Copper alloy + Ni plating/ Rear heat sink: Aluminum/Main unit rear DIN rail fixing tab: POM/Nameplate: PC
Weight			Approx. 210 g
^1 For displaying on an IX Series control panel or PC software. ^2 Configurable for each program. ^3 Select ±5 V, 1 to 5 V, 0 to 5 V, or 4 to 20 mA for use. ^4 When sample hold (edge), peak/bottom/P-P hold (level/edge) is set. ^5 Saves to the inner memory of sensor amplifier. The detection history saved in the sensor amplifier can be copied to PC as a backup by using the PC software or the USB mounted on the control panel for IX series. ^6 For connection to an IX Series control panel or PC software. The RJ45 connector on the main unit is used for connecting to the expansion unit. ^7 When a DL Series device is used. Contact KEYENCE for information on other interfaces. ^8 Includes a DL Series communication unit.