Measurement Sensors – Page 18

shipping

Free Shipping on all order!

warranty

1 year warranty

Live Chat support@plc-direct.com (847) 242-1595

Showing 409 - 432 of 719 products

keyence Stock Image

Keyence GT2-E3N Keyence

0.00 kr

Sold Out

Specifications

Model				GT2-E3N
Mounting method				Installed into GT2-100N/100P (up to 3 boards)
Output				NPN output
Main unit/expansion unit				-
Power supply voltage				Supplied from GT2-100N/100P
Power consumption	Normal			4,200 mW max. (30 V, 140 mA max.)^*1
	Power saving (Eco)			4,000 mW max. (30 V, 133.3 mA max.)
Display power	Measured value display			-
	Other displays
Display range
Display resolution
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			NPN open collector, 40 V 50 mA or less^*2, residual voltage 1 V or less
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET
Power supply/I/O cable				I/O: 30-pin connector (MIL standard)
Weight				Approx. 80 g
^1 For GT2-100 Series, when the maximum number of sensor heads are connected and all units are set to power saving mode. ^2 When 2 or more sensor heads are connected, 20 mA or less.

keyence Stock Image

Keyence OP-88061 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

keyence Stock Image

Keyence OP-88060 Keyence

0.00 kr

Sold Out

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence New Stock Image

Keyence GT2-CHP5M Keyence

11,326.00 kr

Only 5 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

keyence Stock Image

Keyence GT2-CHP2M Keyence

5,800.00 kr

Only 2 units left

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

Keyence New Stock Image

Keyence GT2-CHP10M Keyence

3,011.00 kr

In stock, 11 units

PLC Direct is not an authorized distributor. We offer a broad range of in-stock products with minimal lead time.

keyence Stock Image

Keyence GT2-CHL2M Keyence

3,312.00 kr

Only 2 units left

Specifications

Model				GT2-CHL2M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				2 m 6.56'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 80 g

keyence Stock Image

Keyence GT2-CHL20M Keyence

3,603.00 kr

Only 1 unit left

Specifications

Model				GT2-CHL20M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				20 m 65.62'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 680 g

Keyence Stock Image

Keyence GT2-CHL10M Keyence

4,756.00 kr

Only 5 units left

Specifications

Model				GT2-CHL10M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 L-shaped type - e-con
Length				10 m 32.81'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit). Only the 12 mm type of the L-shape types can be used.
Weight				Approx. 360 g

Keyence Stock Image

Keyence GT2-CH5M Keyence

1,696.00 kr

Only 8 units left

Specifications

Model				GT2-CH5M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				5 m 16.40'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 190 g

Keyence Stock Image

Keyence GT2-CH2M Keyence

1,534.00 kr

Only 9 units left

Specifications

Model				GT2-CH2M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				2 m 6.56'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 80 g

keyence Stock Image

Keyence GT2-CH20M Keyence

4,569.00 kr

Only 1 unit left

Specifications

Model				GT2-CH20M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				20 m 65.62'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 680 g

Keyence New Stock Image

Keyence GT2-CH10M Keyence

2,077.00 kr

Only 9 units left

Specifications

Model				GT2-CH10M
Type				Head cable
Applicable product				GT2 Series
Cable end				M8 straight - e-con
Length				10 m 32.81'
Note				The cable can be cut as desired. If you cut the cable, you will require a connector (OP-84338) for connecting to the display unit (amplifier unit).
Weight				Approx. 360 g

Keyence Stock Image

Keyence GT2-CA2M Keyence

1,737.00 kr

Only 5 units left

Specifications

Model				GT2-CA2M
Type				Connector type amplifier cable
Applicable product				GT2 Series
Length				2 m 6.56'

keyence Stock Image

Keyence GT2-H2 Keyence

0.00 kr

Sold Out

Specifications

Model				GT2-H2
Operating System				Windows 11 Home/Pro/Enterprise (32 bit/64 bit) Windows 10 Home/Pro/Enterprise (32 bit/64 bit) One OS must be installed.
Supported languages				Japanese/English/German/Spanish/Portuguese/Italian/French/Simplified Chinese
CPU				Needs to be compliant with system requirements for OS.
Memory capacity
Available hard disk space				1 GB or more
Display				Resolution 1024 × 768 pixel or higher, display color High Color (16 bit) or higher
PC interface				Over USB2.0 or RS-232C (Serial) port or Ethernet (TCP/IP)
Note				.NET Framework 4.0 or 4.5 needs to be installed.^*1
^*1 If .NET Framework is not installed, .NET Framework 4.0 or 4.5 will be installed when GT2-H2 installed.

keyence Stock Image

Keyence GT2-H1 Keyence

0.00 kr

Sold Out

Specifications

Model				GT2-H1
Operating System				Windows 8.1 Update/Proupdate (32bit/64 bit) Windows 7 Home Basic / Home Premium / Professional / Ultimate (SP1 or better, 32bit/ 64bit) Windows XP Home Edition/Professional (SP3 or better、32bit)One OS must be installed.
Supported languages				Japanese / English / German
CPU				Windows 8.1/ Windows 7: Needs to be compliant with system requirements for OS. Windows XP: Pentium III or better Clock speed 1 GHz or faster
Memory capacity				Windows 8.1/ Windows 7: Needs to be compliant with system requirements for OS. Windows XP: 512 MB or more (1GB or more is recommended)
Available hard disk space				1 GB or more
Display				Resolution 1024 × 768 pixel or higher, display color High Color (16bit) or higher
PC interface				Over USB2.0 or RS-232C(Serial) port
Note				.NET Framework 4.0 or 4.5 needs to be installed ^*1 .
^*1 If .NET Framework is not installed, .NET Framework 4.0 or 4.5 will be installed when GT2-H1 installed.

Keyence Stock Image

Keyence GT2-UB1 Keyence

7,718.00 kr

Only 3 units left

Specifications

Model				GT2-UB1
Cable connector				M8 Female
Operating System				Windows 11 Home/Pro/Enterprise (32bit/64bit) Windows 10 Home/Pro/Enterprise (32bit/64bit) One OS must be installed.
USB connector				USB TypeA
USB Communication				USB2.0 Full Speed
Interface				USB-COM
Power supply voltage				USB bus power
Rating	Power consumption			200 mA max.^*1
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main unit: Polycarbonate(PC), Cable: PVC
Weight				Approx. 40 g (including the cable)
^*1 Bus-power-type USB hubs cannot be used.

Keyence Stock Image

Keyence GT2-76P Keyence

4,528.00 kr

In stock, 13 units

Specifications

Model				GT2-76P
Mounting method				Panel mount
Output				PNP output
Main unit/expansion unit				Expansion unit^*1
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable				12-core connector connection (Connecting cable included)
Weight				Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-76N Keyence

4,528.00 kr

Only 8 units left

Specifications

Model				GT2-76N
Mounting method				Panel mount
Output				NPN output
Main unit/expansion unit				Expansion unit^*1
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable				12-core connector connection (Connecting cable included)
Weight				Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-75P Keyence

4,097.00 kr

In stock, 14 units

Specifications

Model				GT2-75P
Mounting method				Panel mount
Output				PNP output
Main unit/expansion unit				Main unit
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable				12-core connector connection (Connecting cable included)
Weight				Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-75N Keyence

5,256.00 kr

In stock, 13 units

Specifications

Model				GT2-75N
Mounting method				Panel mount
Output				NPN output
Main unit/expansion unit				Main unit
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Power supply/I/O cable				12-core connector connection (Connecting cable included)
Weight				Approx. 140 g (including panel mounting bracket, protective front cover and power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-72P Keyence

4,097.00 kr

In stock, 13 units

Specifications

Model				GT2-72P
Mounting method				DIN-rail mount
Output				PNP output
Main unit/expansion unit				Expansion unit^*1
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output				-
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight				Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-72N Keyence

4,097.00 kr

In stock, 15 units

Specifications

Model				GT2-72N
Mounting method				DIN-rail mount
Output				NPN output
Main unit/expansion unit				Expansion unit^*1
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			NPN open collector, 40 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output				-
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (GT2-71MCN/71MCP: -10 to +45 °C 14 to 113 °F when expansion unit (s) is connected)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight				Approx. 140 g (including power cable)
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Keyence New Stock Image

Keyence GT2-72CP Keyence

3,865.00 kr

In stock, 13 units

Specifications

Model				GT2-72CP
Mounting method				DIN-rail mount
Output				PNP output
Main unit/expansion unit				Expansion unit^*1
Power supply voltage				10 to 30 VDC, including 10 % ripple (P-P), Class 2^*1
Power consumption	Normal			2,200 mW max. (30 V, 73.3 mA max.)
	Power saving (Eco)			1,700 mW max. (30 V, 56.7 mA max.)
Display power	Measured value display			6 + 1/2-digit 7-segment LED (red)
	Other displays			2-color, 13-level bar LED display (red, green), indicators (red, green)
Display range				-199.999.9 to 199.999.9
Display resolution				0.1 μm 0.004 Mil
Control input	Timing/preset/ reset/bank input			No-voltage input
Control output	HH/HI/GO/LO/LL			PNP open collector, 30 V 50 mA or less, residual voltage 1 V or less^1^2
Analog output				-
Response time				hsp(3)/5/10/100/500/1,000 ms (When using GT2-Pxxx, hsp(12)/20/40/400/2,000/4,000 ms)
Environmental resistance	Ambient temperature			-10 to +50 °C 14 to 122 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material				Main body case: Polycarbonate, Key top: Polyacetal, Front sheet: PET, Cable: PVC
Weight				Approx. 70 g
^1 When adding expansion units, there are the following restrictions according to the number of connected units. [When 2 to 8 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 20 mA or less (GT2-71MCN(P) only) Ambient temperature: -10 to 45°C 14 to 113°F [When 9 to 15 units are connected including the main unit] Power supply voltage: 20 to 30 VDC Control output current: 10 mA or less (including the DL-RB1A output current) Residual voltage: 1.5 V or lower (GT2-71MCN(P) only) Ambient temperature: -10 to 45 °C 14 to 113 °F ^2 The GT2-71MCN(P) does not have HH/LL.

Previous Page 18 / 30Next